A.8.12 - Data leakage prevention

NIST SP 800-53 Revision 5 Mapping

ID		Name
AU-13		Monitoring for Information Disclosure
PE-3(2)		Physical Access Control \| Facility and Systems
PE-19		Information Leakage
SC-7(10)		Boundary Protection \| Prevent Exfiltration
SI-20		Tainting

SPARTA Countermeasures Mapping

ID	Name	Description	D3FEND
CM0052	Insider Threat Protection	Establish policy and procedures to prevent individuals (i.e., insiders) from masquerading as individuals with valid access to areas where commanding of the spacecraft is possible. Establish an Insider Threat Program to aid in the prevention of people with authorized access performing malicious activities.
CM0003	TEMPEST	The spacecraft should protect system components, associated data communications, and communication buses in accordance with TEMPEST controls to prevent side channel / proximity attacks. Encompass the spacecraft critical components with a casing/shielding so as to prevent access to the individual critical components.
CM0062	Dummy Process - Aggregator Node	According to Securing Sensor Nodes Against Side Channel Attacks, it is practically inefficient to prevent adversaries from identifying aggregator nodes in a network (i.e., constellation) because camouflaging traffic in sensor networks is power intensive. Consequently, focus on preventing adversaries from identifying valid aggregation cycles of aggregator nodes. One solution to counter such attacks is to have each aggregator node execute dummy operations that resemble the average power consumption curve observed during the normal operation of the aggregator node. Apart from simulating the power consumption of a genuine process execution, the two necessities that the execution of the dummy process must incorporate to be successful in thwarting the accumulation phase are to use a different dummy execution process each time or have a low repetition rate. This should help prevent the attacker from finding a pattern that would differentiate the execution of a dummy process from the normal execution of an aggregator node. The second requirement relates to the timing of the execution of the dummy process. Depending on whether there is a pattern to the timing of the execution of a dummy process, a threat actor may be able to identify and disregard the dummy process. For example, if a threat actor is capable of identifying the presence or absence of a radio frequency transmission, the attacker can disregard any power consumption curve computed during the absence of transmission signal. Similarly, if the dummy process is not executed every time the aggregator node receives a transmission, the attacker will be able to identify invalid transmission. Hence, to ensure the effectiveness of this scheme, the dummy process must be executed each time the aggregator receives a transmission as well as randomly during idle periods. The advantage of incorporating dummy processes in an aggregator is to minimize the ease of identifying transmission flow in a sensor network that can be used to identify the base station of the sensor network, which could be highly confidential in critical applications.
CM0005	Ground-based Countermeasures	This countermeasure is focused on the protection of terrestrial assets like ground networks and development environments/contractor networks, etc. Traditional detection technologies and capabilities would be applicable here. Utilizing resources from NIST CSF to properly secure these environments using identify, protect, detect, recover, and respond is likely warranted. Additionally, NISTIR 8401 may provide resources as well since it was developed to focus on ground-based security for space systems (https://nvlpubs.nist.gov/nistpubs/ir/2022/NIST.IR.8401.ipd.pdf). Furthermore, the MITRE ATT&CK framework provides IT focused TTPs and their mitigations https://attack.mitre.org/mitigations/enterprise/. Several recommended NIST 800-53 Rev5 controls are provided for reference when designing ground systems/networks.
CM0053	Physical Security Controls	Employ physical security controls (badge with pins, guards, gates, etc.) to prevent unauthorized access to the systems that have the ability to command the spacecraft.
CM0057	Tamper Resistant Body	Using a tamper resistant body can increase the one-time cost of the sensor node but will allow the node to conserve the power usage when compared with other countermeasures.
CM0058	Power Randomization	Power randomization is a technique in which a hardware module is built into the chip that adds noise to the power consumption. This countermeasure is simple and easy to implement but is not energy efficient and could be impactful for size, weight, and power which is limited on spacecraft as it adds to the fabrication cost of the device.
CM0059	Power Consumption Obfuscation	Design hardware circuits or perform obfuscation in general that mask the changes in power consumption to increase the cost/difficulty of a power analysis attack. This will increase the cost of manufacturing sensor nodes.
CM0060	Secret Shares	Use of secret shares in which the original computation is divided probabilistically such that the power subset of shares is statistically independent. One of the major drawbacks of this solution is the increase in the power consumption due to the number of operations that are almost doubled.
CM0061	Power Masking	Masking is a scheme in which the intermediate variable is not dependent on an easily accessible subset of secret key. This results in making it impossible to deduce the secret key with partial information gathered through electromagnetic leakage.
CM0063	Increase Clock Cycles/Timing	Use more clock cycles such that branching does not affect the execution time. Also, the memory access times should be standardized to be the same over all accesses. If timing is not mission critical and time is in abundance, the access times can be reduced by adding sufficient delay to normalize the access times. These countermeasures will result in increased power consumption which may not be conducive for low size, weight, and power missions.
CM0064	Dual Layer Protection	Use a dual layered case with the inner layer a highly conducting surface and the outer layer made of a non-conducting material. When heat is generated from internal computing components, the inner, highly conducting surface will quickly dissipate the heat around. The outer layer prevents accesses to the temporary hot spots formed on the inner layer.

Related SPARTA Techniques and Sub-Techniques

ID		Name	Description
REC-0001		Gather Spacecraft Design Information	Threat actors may gather information about the victim SV's design that can be used for future campaigns or to help perpetuate other techniques. Information about the SV can include software, firmware, encryption type, purpose, as well as various makes and models of subsystems.
	REC-0001.01	Software	Threat actors may gather information about the victim SV's internal software that can be used for future campaigns or to help perpetuate other techniques. Information (e.g. source code, binaries, etc.) about commercial, open-source, or custom developed software may include a variety of details such as types, versions, and memory maps. Leveraging this information threat actors may target vendors of operating systems, flight software, or open-source communities to embed backdoors or for performing reverse engineering research to support offensive cyber operations.
	REC-0001.02	Firmware	Threat actors may gather information about the victim SV's firmware that can be used for future campaigns or to help perpetuate other techniques. Information about the firmware may include a variety of details such as type and versions on specific devices, which may be used to infer more information (ex. configuration, purpose, age/patch level, etc.). Leveraging this information threat actors may target firmware vendors to embed backdoors or for performing reverse engineering research to support offensive cyber operations.
	REC-0001.03	Cryptographic Algorithms	Threat actors may gather information about any cryptographic algorithms used on the victim SV's that can be used for future campaigns or to help perpetuate other techniques. Information about the algorithms can include type and private keys. Threat actors may also obtain the authentication scheme (i.e., key/password/counter values) and leverage it to establish communications for commanding the target SV or any of its subsystems. Some SVs only require authentication vice authentication and encryption, therefore once obtained, threat actors may use any number of means to command the spacecraft without needing to go through a legitimate channel. The authentication information may be obtained through reconnaissance of the ground system or retrieved from the victim SV.
	REC-0001.04	Data Bus	Threat actors may gather information about the data bus used within the victim SV that can be used for future campaigns or to help perpetuate other techniques. Information about the data bus can include the make and model which could lead to more information (ex. protocol, purpose, controller, etc.), as well as locations/addresses of major subsystems residing on the bus. Threat actors may also gather information about the bus voltages of the victim SV. This information can include optimal power levels, connectors, range, and transfer rate.
	REC-0001.05	Thermal Control System	Threat actors may gather information about the thermal control system used with the victim SV that can be used for future campaigns or to help perpetuate other techniques. Information gathered can include type, make/model, and varies analysis programs that monitor it.
	REC-0001.06	Maneuver & Control	Threat actors may gather information about the station-keeping control systems within the victim SV that can be used for future campaigns or to help perpetuate other techniques. Information gathered can include thruster types, propulsion types, attitude sensors, and data flows associated with the relevant subsystems.
	REC-0001.07	Payload	Threat actors may gather information about the type(s) of payloads hosted on the victim SV. This information could include specific commands, make and model, and relevant software. Threat actors may also gather information about the location of the payload on the bus and internal routing as it pertains to commands within the payload itself.
	REC-0001.08	Power	Threat actors may gather information about the power system used within the victim SV. This information can include type, power intake, and internal algorithms. Threat actors may also gather information about the solar panel configurations such as positioning, automated tasks, and layout. Additionally, threat actors may gather information about the batteries used within the victim SV. This information can include the type, quantity, storage capacity, make and model, and location.
	REC-0001.09	Fault Management	Threat actors may gather information about any fault management that may be present on the victim SV. This information can help threat actors construct specific attacks that may put the SV into a fault condition and potentially a more vulnerable state depending on the fault response.
REC-0002		Gather Spacecraft Descriptors	Threat actors may gather information about the victim SV's descriptors that can be used for future campaigns or to help perpetuate other techniques. Information about the descriptors may include a variety of details such as identity attributes, organizational structures, and mission operational parameters.
	REC-0002.01	Identifiers	Threat actors may gather information about the victim SV's identity attributes that can be used for future campaigns or to help perpetuate other techniques. Information may include a variety of details such as the satellite catalog number, international designator, mission name, and more.
	REC-0002.02	Organization	Threat actors may gather information about the victim SV's associated organization(s) that can be used for future campaigns or to help perpetuate other techniques. Collection efforts may target the mission owner/operator in order to conduct further attacks against the organization, individual, or other interested parties. Threat actors may also seek information regarding the SV's designer/builder, including physical locations, key employees, and roles and responsibilities as they pertain to the SV, as well as information pertaining to the mission's end users/customers.
	REC-0002.03	Operations	Threat actors may gather information about the victim SV's operations that can be used for future campaigns or to help perpetuate other techniques. Collection efforts may target mission objectives, orbital parameters such as orbit slot and inclination, user guides and schedules, etc. Additionally, threat actors may seek information about constellation deployments and configurations where applicable.
REC-0003		Gather Spacecraft Communications Information	Threat actors may obtain information on the victim SV's communication channels in order to determine specific commands, protocols, and types. Information gathered can include commanding patterns, antenna shape and location, beacon frequency and polarization, and various transponder information.
	REC-0003.01	Communications Equipment	Threat actors may gather information regarding the communications equipment and its configuration that will be used for communicating with the victim SV. This includes: Antenna Shape: This information can help determine the range in which it can communicate, the power of it's transmission, and the receiving patterns. Antenna Configuration/Location: This information can include positioning, transmission frequency, wavelength, and timing. Telemetry Signal Type: Information can include timing, radio frequency wavelengths, and other information that can provide insight into the spacecraft's telemetry system. Beacon Frequency: This information can provide insight into where the SV is located, what it's orbit is, and how long it can take to communicate with a ground station. Beacon Polarization: This information can help triangulate the SV as it orbits the earth and determine how a satellite must be oriented in order to communicate with the victim SV. Transponder: This could include the number of transponders per band, transponder translation factor, transponder mappings, power utilization, and/or saturation point.
	REC-0003.02	Commanding Details	Threat actors may gather information regarding the commanding approach that will be used for communicating with the victim SV. This includes: Commanding Signal Type: This can include timing, radio frequency wavelengths, and other information that can provide insight into the spacecraft's commanding system. Valid Commanding Patterns: Most commonly, this comes in the form of a command database, but can also include other means that provide information on valid commands and the communication protocols used by the victim SV. Valid Commanding Periods: This information can provide insight into when a command will be accepted by the SV and help the threat actor construct a viable attack campaign.
REC-0004		Gather Launch Information	Threat actors may gather the launch date and time, location of the launch (country & specific site), organizations involved, launch vehicle, etc. This information can provide insight into protocols, regulations, and provide further targets for the threat actor, including specific vulnerabilities with the launch vehicle itself.
	REC-0004.01	Flight Termination	Threat actor may obtain information regarding the vehicle's flight termination system. Threat actors may use this information to perform later attacks and target the vehicle's termination system to have desired impact on mission.
REC-0005		Eavesdropping	Threat actors may seek to capture network communications throughout the ground station and radio frequency (RF) communication used for uplink and downlink communications. RF communication frequencies vary between 30MHz and 60 GHz. Threat actors may capture RF communications using specialized hardware, such as software defined radio (SDR), handheld radio, or a computer with radio demodulator turned to the communication frequency. Network communications may be captured using packet capture software while the threat actor is on the target network.
	REC-0005.03	Proximity Operations	Threat actors may capture signals and/or network communications as they travel on-board the vehicle (i.e., EMSEC/TEMPEST), via RF, or terrestrial networks. This information can be decoded to determine commanding and telemetry protocols, command times, and other information that could be used for future attacks.
REC-0006		Gather FSW Development Information	Threat actors may obtain information regarding the flight software (FSW) development environment for the victim SV. This information may include the development environment, source code, compiled binaries, testing tools, and fault management.
	REC-0006.01	Development Environment	Threat actors may gather information regarding the development environment for the victim SV's FSW. This information can include IDEs, configurations, source code, environment variables, source code repositories, code "secrets", and compiled binaries.
	REC-0006.02	Security Testing Tools	Threat actors may gather information regarding how a victim SV is tested in regards to the FSW. Understanding the testing approach including tools could identify gaps and vulnerabilities that could be discovered and exploited by a threat actor.
REC-0007		Monitor for Safe-Mode Indicators	Threat actors may gather information regarding safe-mode indicators on the victim SV. Safe-mode is when all non-essential systems are shut down and only essential functions within the SV are active. During this mode, several commands are available to be processed that are not normally processed. Further, many protections may be disabled at this time.
REC-0008		Gather Supply Chain Information	Threat actors may gather information about a mission's supply chain or product delivery mechanisms that can be used for future campaigns or to help perpetuate other techniques.
	REC-0008.01	Hardware	Threat actors may gather information that can be used to facilitate a future attack where they manipulate hardware components in the victim SV prior to the customer receiving them in order to achieve data or system compromise. The threat actor can insert backdoors and give them a high level of control over the system when they modify the hardware or firmware in the supply chain. This would include ASIC and FPGA devices as well.
	REC-0008.02	Software	Threat actors may gather information relating to the mission's software supply chain in order to facilitate future attacks to achieve data or system compromise. This attack can take place in a number of ways, including manipulation of source code, manipulation of the update and/or distribution mechanism, or replacing compiled versions with a malicious one.
	REC-0008.03	Known Vulnerabilities	Threat actors may gather information about vulnerabilities that can be used for future campaigns or to perpetuate other techniques. A vulnerability is a weakness in the victim SV's hardware, subsystems, bus, or software that can, potentially, be exploited by a threat actor to cause unintended or unanticipated behavior to occur. During reconnaissance as threat actors identify the types/versions of software (i.e., COTS, open-source) being used, they will look for well-known vulnerabilities that could affect the space vehicle. Threat actors may find vulnerability information by searching leaked documents, vulnerability databases/scanners, compromising ground systems, and searching through online databases.
REC-0009		Gather Mission Information	Threat actors may initially seek to gain an understanding of a target mission by gathering information commonly captured in a Concept of Operations (or similar) document and related artifacts. Information of interest includes, but is not limited to: - the needs, goals, and objectives of the system - system overview and key elements/instruments - modes of operations (including operational constraints) - proposed capabilities and the underlying science/technology used to provide capabilities (i.e., scientific papers, research studies, etc.) - physical and support environments
RD-0002		Compromise Infrastructure	Threat actors may compromise third-party infrastructure that can be used for future campaigns or to perpetuate other techniques. Infrastructure solutions include physical devices such as antenna, amplifiers, and convertors, as well as software used by satellite communicators. Instead of buying or renting infrastructure, a threat actor may compromise infrastructure and use it during other phases of the campaign's lifecycle.
	RD-0002.01	Mission-Operated Ground System	Threat actors may compromise mission owned/operated ground systems that can be used for future campaigns or to perpetuate other techniques. These ground systems have already been configured for communications to the victim SV. By compromising this infrastructure, threat actors can stage, launch, and execute an operation. Threat actors may utilize these systems for various tasks, including Execution and Exfiltration.
	RD-0002.02	3rd Party Ground System	Threat actors may compromise access to third-party ground systems that can be used for future campaigns or to perpetuate other techniques. These ground systems can be or may have already been configured for communications to the victim SV. By compromising this infrastructure, threat actors can stage, launch, and execute an operation.
RD-0003		Obtain Capabilities	Threat actors may buy and/or steal capabilities that can be used for future campaigns or to perpetuate other techniques. Rather than developing their own capabilities in-house, threat actors may purchase, download, or steal them. Activities may include the acquisition of malware, software, exploits, and information relating to vulnerabilities. Threat actors may obtain capabilities to support their operations throughout numerous phases of the campaign lifecycle.
	RD-0003.02	Cryptographic Keys	Threat actors may obtain encryption keys as they are used for the main commanding of the target SV or any of its subsystems/payloads. Once obtained, threat actors may use any number of means to command the spacecraft without needing to go through a legitimate channel. These keys may be obtained through reconnaissance of the ground system or retrieved from the victim SV.
RD-0004		Stage Capabilities	Threat actors may upload, install, or otherwise set up capabilities that can be used for future campaigns or to perpetuate other techniques. To support their operations, a threat actor may need to develop their own capabilities or obtain them in some way in order to stage them on infrastructure under their control. These capabilities may be staged on infrastructure that was previously purchased or rented by the threat actor or was otherwise compromised by them.
	RD-0004.01	Identify/Select Delivery Mechanism	Threat actors may identify, select, and prepare a delivery mechanism in which to attack the space system (i.e., communicate with the victim SV, deny the ground, etc.) to achieve their desired impact. This mechanism may be located on infrastructure that was previously purchased or rented by the threat actor or was otherwise compromised by them. The mechanism must include all aspects needed to communicate with the victim SV, including ground antenna, converters, and amplifiers.
	RD-0004.02	Upload Exploit/Payload	Threat actors may upload exploits and payloads to a third-party infrastructure that they have purchased or rented or stage it on an otherwise compromised ground station. Exploits and payloads would include files and commands to be uploaded to the victim SV in order to conduct the threat actor's attack.
IA-0002		Compromise Software Defined Radio	Threat actors may target software defined radios due to their software nature to establish C2 channels. Since SDRs are programmable, when combined with supply chain or development environment attacks, SDRs provide a pathway to setup covert C2 channels for a threat actor.
IA-0003		Crosslink via Compromised Neighbor	Threat actors may compromise a victim SV via the crosslink communications of a neighboring SV that has been compromised. SVs in close proximity are able to send commands back and forth. Threat actors may be able to leverage this access to compromise other SVs once they have access to another that is nearby.
IA-0004		Secondary/Backup Communication Channel	Threat actors may compromise alternative communication pathways which may not be as protected as the primary pathway. Depending on implementation the contingency communication pathways/solutions may lack the same level of security (i.e., physical security, encryption, authentication, etc.) which if forced to use could provide a threat actor an opportunity to launch attacks. Typically these would have to be coupled with other denial of service techniques on the primary pathway to force usage of secondary pathways.
	IA-0004.01	Ground Station	Threat actors may establish a foothold within the backup ground/mission operations center (MOC) and then perform attacks to force primary communication traffic through the backup communication channel so that other TTPs can be executed (man-in-the-middle, malicious commanding, malicious code, etc.). While an attacker would not be required to force the communications through the backup channel vice waiting until the backup is used for various reasons. The backup ground/MOC should be considered a viable attack vector and the appropriate/equivalent security controls from the primary communication channel should be on the backup ground/MOC as well.
IA-0005		Rendezvous & Proximity Operations	Threat actors may perform a space rendezvous which is a set of orbital maneuvers during which a spacecraft arrives at the same orbit and approach to a very close distance (e.g. within visual contact or close proximity) to a target SV.
	IA-0005.01	Compromise Emanations	Threat actors in close proximity may intercept and analyze electromagnetic radiation emanating from cryptoequipment and/or the target SV (i.e., main bus) to determine whether the emanations are information bearing. The data could be used to establish initial access.
	IA-0005.02	Docked Vehicle / OSAM	Threat actors may leverage docking vehicles to laterally move into a target SV. If information is known on docking plans, a threat actor may target vehicles on the ground or in space to deploy malware to laterally move or execute malware on the target SV via the docking interface.
	IA-0005.03	Proximity Grappling	Threat actors may posses the capability to grapple target SVs once it has established the appropriate space rendezvous. If from a proximity / rendezvous perspective a threat actor has the ability to connect via docking interface or expose testing (i.e., JTAG port) once it has grappled the target SV, they could perform various attacks depending on the access enabled via the physical connection.
IA-0006		Compromise Hosted Payload	Threat actors may compromise the target SV hosted payload to initially access and/or persist within the system. Hosted payloads can usually be accessed from the ground via a specific command set. The command pathways can leverage the same ground infrastructure or some host payloads have their own ground infrastructure which can provide an access vector as well. Threat actors may be able to leverage the ability to command hosted payloads to upload files or modify memory addresses in order to compromise the system. Depending on the implementation, hosted payloads may provide some sort of lateral movement potential.
IA-0007		Compromise Ground Station	Threat actors may initially compromise the ground station in order to access the target SV. Once compromised, the threat actor can perform a multitude of initial access techniques, including replay, compromising FSW deployment, compromising encryption keys, and compromising authentication schemes.
	IA-0007.01	Compromise On-Orbit Update	Threat actors may manipulate and modify on-orbit updates before they are sent to the target SV. This attack can be done in a number of ways, including manipulation of source code, manipulating environment variables, on-board table/memory values, or replacing compiled versions with a malicious one.
	IA-0007.02	Malicious Commanding via Valid GS	Threat actors may compromise target owned ground systems components (e.g., front end processors, command and control software, etc.) that can be used for future campaigns or to perpetuate other techniques. These ground systems components have already been configured for communications to the victim SV. By compromising this infrastructure, threat actors can stage, launch, and execute an operation. Threat actors may utilize these systems for various tasks, including Execution and Exfiltration.
IA-0009		Trusted Relationship	Access through trusted third-party relationship exploits an existing connection that has been approved for interconnection. Leveraging third party / approved interconnections to pivot into the target systems is a common technique for threat actors as these interconnections typically lack stringent access control due to the trusted status.
	IA-0009.01	Mission Collaborator (academia, international, etc.)	Threat actors may seek to exploit mission partners to gain an initial foothold for pivoting into the mission environment and eventually impacting the SV. The complex nature of many space systems rely on contributions across organizations, including academic partners and even international collaborators. These organizations will undoubtedly vary in their system security posture and attack surface.
	IA-0009.02	Vendor	Threat actors may target the trust between vendors and the target space vehicle. Missions often grant elevated access to vendors in order to allow them to manage internal systems as well as cloud-based environments. The vendor's access may be intended to be limited to the infrastructure being maintained but it may provide laterally movement into the target space vehicle. Attackers may leverage security weaknesses in the vendor environment to gain access to more critical mission resources or network locations. In the space vehicle context vendors may have direct commanding and updating capabilities outside of the primary communication channel.
	IA-0009.03	User Segment	Threat actors can target the user segment in an effort to laterally move into other areas of the end-to-end mission architecture. When user segments are interconnected, threat actors can exploit lack of segmentation as the user segment's security undoubtedly varies in their system security posture and attack surface than the primary space mission. The user equipment and users themselves provide ample attack surface as the human element and their vulnerabilities (i.e., social engineering, phishing, iOT) are often the weakest security link and entry point into many systems.
IA-0012		Assembly, Test, and Launch Operation Compromise	Threat actors may target the spacecraft hardware and/or software while the spacecraft is at Assembly, Test, and Launch Operation (ATLO). ATLO is often the first time pieces of the spacecraft are fully integrated and exchanging data across interfaces. Malware could propagate from infected devices across the integrated spacecraft. For example, test equipment (i.e., transient cyber asset) is often brought in for testing elements of the spacecraft. Additionally, varying levels of physical security is in place which may be a reduction in physical security typically seen during development. The ATLO environment should be considered a viable attack vector and the appropriate/equivalent security controls from the primary development environment should be implemented during ATLO as well.
EXF-0002		Side-Channel Attack	Threat actors may use a side-channel attack attempts to gather information by measuring or exploiting indirect effects of the SV. Information within the SV can be extracted through these side-channels in which sensor data is analyzed in non-trivial ways to recover subtle, hidden or unexpected information. A series of measurements of a side-channel constitute an identifiable signature which can then be matched against a signature database to identify target information, without having to explicitly decode the side-channel.
	EXF-0002.01	Power Analysis Attacks	Threat actors can analyze power consumption on-board the spacecraft to exfiltrate information. In power analysis attacks, the threat actor studies the power consumption of devices, especially cryptographic modules. Power analysis attacks require close proximity to a sensor node, such that a threat actor can measure the power consumption of the sensor node. There are two types of power analysis, namely simple power analysis (SPA) and differential power analysis (DPA). In differential power analysis, the threat actor studies the power analysis and is able to apply mathematical and statistical principles to determine the intermediate values.
	EXF-0002.02	Electromagnetic Leakage Attacks	Threat actors can leverage electromagnetic emanations to obtain sensitive information. The electromagnetic radiations attain importance when they are hardware generated emissions, especially emissions from the cryptographic module. Electromagnetic leakage attacks have been shown to be more successful than power analysis attacks on chicards. If proper protections are not in place on the spacecraft, the circuitry is exposed and hence leads to stronger emanations of EM radiations. If the circuitry is exposed, it provides an easier environment to study the electromagnetic emanations from each individual component.
	EXF-0002.03	Traffic Analysis Attacks	In a terrestrial environment, threat actors use traffic analysis attacks to analyze traffic flow to gather topological information. This traffic flow can divulge information about critical nodes, such as the aggregator node in a sensor network. In the space environment, specifically with relays and constellations, traffic analysis can be used to understand the energy capacity of spacecraft node and the fact that the transceiver component of a spacecraft node consumes the most power. The spacecraft nodes in a constellation network limit the use of the transceiver to transmit or receive information either at a regulated time interval or only when an event has been detected. This generally results in an architecture comprising some aggregator spacecraft nodes within a constellation network. These spacecraft aggregator nodes are the sensor nodes whose primary purpose is to relay transmissions from nodes toward the ground station in an efficient manner, instead of monitoring events like a normal node. The added functionality of acting as a hub for information gathering and preprocessing before relaying makes aggregator nodes an attractive target to side channel attacks. A possible side channel attack could be as simple as monitoring the occurrences and duration of computing activities at an aggregator node. If a node is frequently in active states (instead of idle states), there is high probability that the node is an aggregator node and also there is a high probability that the communication with the node is valid. Such leakage of information is highly undesirable because the leaked information could be strategically used by threat actors in the accumulation phase of an attack.
	EXF-0002.04	Timing Attacks	Threat actors can leverage timing attacks to exfiltrate information due to variances in the execution timing for different sub-systems in the spacecraft (i.e., cryptosystem). In spacecraft, due to the utilization of processors with lower processing powers (i.e. slow), this becomes all the more important because slower processors will enhance even small difference in computation time. Every operation in a spacecraft takes time to execute, and the time can differ based on the input; with precise measurements of the time for each operation, a threat actor can work backwards to the input. Finding secrets through timing information may be significantly easier than using cryptanalysis of known plaintext, ciphertext pairs. Sometimes timing information is combined with cryptanalysis to increase the rate of information leakage.
	EXF-0002.05	Thermal Imaging attacks	Threat actors can leverage thermal imaging attacks (e.g., infrared images) to measure heat that is emitted as a means to exfiltrate information from spacecraft processors. Thermal attacks rely on temperature profiling using sensors to extract critical information from the chip(s). The availability of highly sensitive thermal sensors, infrared cameras, and techniques to calculate power consumption from temperature distribution [7] has enhanced the effectiveness of these attacks. As a result, side-channel attacks can be performed by using temperature data without measuring power pins of the chip.
EXF-0005		Proximity Operations	Threat actors may leverage the lack of emission security or tempest controls to exfiltrate information using a visiting SV. This is similar to side-channel attacks but leveraging a visiting SV to measure the signals for decoding purposes.
EXF-0006		Modify Software Defined Radio	Threat actors may target software defined radios due to their software nature to setup exfiltration channels. Since SDRs are programmable, when combined with supply chain or development environment attacks, SDRs provide a pathway to setup covert exfiltration channels for a threat actor.
EXF-0007		Compromised Ground Station	Threat actors may compromise target owned ground systems that can be used for future campaigns or to perpetuate other techniques. These ground systems have already been configured for communications to the victim SV. By compromising this infrastructure, threat actors can stage, launch, and execute an operation. Threat actors may utilize these systems for various tasks, including Execution and Exfiltration.
EXF-0008		Compromised Developer Site	Threat actors may compromise development environments located within the ground system or a developer/partner site. This attack can take place in a number of different ways, including manipulation of source code, manipulating environment variables, or replacing compiled versions with a malicious one. This technique is usually performed before the target SV is in orbit, with the hopes of adding malicious code to the actual FSW during the development process.
EXF-0009		Compromised Partner Site	Threat actors may compromise access to partner sites that can be used for future campaigns or to perpetuate other techniques. These sites are typically configured for communications to the primary ground station(s) or in some cases the SV itself. Unlike mission operated ground systems, partner sites may provide an easier target for threat actors depending on the company, roles and responsibilities, and interests of the third-party. By compromising this infrastructure, threat actors can stage, launch, and execute an operation. Threat actors may utilize these systems for various tasks, including Execution and Exfiltration.
PER-0003		Ground System Presence	Threat actors may compromise target owned ground systems that can be used for persistent access to the SV or to perpetuate other techniques. These ground systems have already been configured for communications to the victim SV. By compromising this infrastructure, threat actors can stage, launch, and execute persistently.
DE-0002		Prevent Downlink	Threat actors may target the downlink connections to prevent the victim SV from sending telemetry to the ground controllers. Telemetry is the only method in which ground controllers can monitor the health and stability of the SV while in orbit. By disabling this downlink, threat actors may be able to stop mitigations from taking place.
	DE-0002.01	Inhibit Ground System Functionality	Threat actors may utilize ground-system presence to inhibit the ground system software's ability to process (or display) telemetry, effectively leaving ground controllers unaware of vehicle activity during this time. Telemetry is the only method in which ground controllers can monitor the health and stability of the SV while in orbit. By disabling this downlink, threat actors may be able to stop mitigations from taking place.
DE-0004		Masquerading	Threat actors may gain access to a victim SV by masquerading as an authorized entity. This can be done several ways, including through the manipulation of command headers, spoofing locations, or even leveraging Insider's access (i.e., Insider Threat)
LM-0001		Hosted Payload	Threat actors may use the hosted payload within the victim SV in order to gain access to other subsystems. The hosted payload often has a need to gather and send data to the internal subsystems, depending on its purpose. Threat actors may be able to take advantage of this communication in order to laterally move to the other subsystems and have commands be processed.
LM-0003		Constellation Hopping via Crosslink	Threat actors may attempt to command another neighboring spacecraft via crosslink. SVs in close proximity are often able to send commands back and forth. Threat actors may be able to leverage this access to compromise another SV.
LM-0004		Visiting Vehicle Interface(s)	Threat actors may move to other SVs through visiting vehicle interfaces. When a vehicle docks with a SV, many programs are automatically triggered in order to ensure docking mechanisms are locked. This entails several data points and commands being sent to and from the SV and the visiting vehicle. If a threat actor were to compromise a visiting vehicle, they could target these specific programs in order to send malicious commands to the victim SV once docked.

Space Threats Mapped

ID		Description
SV-CF-2		Eavesdropping (RF and proximity)
SV-MA-2		Heaters and flow valves of the propulsion subsystem are controlled by electric signals so cyberattacks against these signals could cause propellant lines to freeze, lock valves, waste propellant or even put in de-orbit or unstable spinning
SV-MA-7		Exploit ground system and use to maliciously to interact with the spacecraft

Sample Requirements

Requirement	Rationale/Additional Guidance/Notes
The [spacecraft] shall detect and deny unauthorized outgoing communications posing a threat to the spacecraft.{SV-DCO-1}{IR-4,IR-4(1),RA-5(4),RA-10,SC-7(9),SC-7(10),SI-4,SI-4(1),SI-4(4),SI-4(7),SI-4(11),SI-4(13),SI-4(24),SI-4(25)}
The [spacecraft] shall protect system components, associated data communications, and communication buses in accordance with: (i) national emissions and TEMPEST policies and procedures, and (ii) the security category or sensitivity of the transmitted information.{SV-CF-2,SV-MA-2}{PE-14,PE-19,PE-19(1),RA-5(4),SA-8(18),SA-8(19),SC-8(1)}	The measures taken to protect against compromising emanations must be in accordance with DODD S-5200.19, or superseding requirements. The concerns addressed by this control during operation are emanations leakage between multiple payloads within a single space platform, and between payloads and the bus.
The [organization] shall describe (a) the separation between RED and BLACK cables, (b) the filtering on RED power lines, (c) the grounding criteria for the RED safety grounds, (d) and the approach for dielectric separators on any potential fortuitous conductors.{SV-CF-2,SV-MA-2}{PE-19,PE-19(1)}
The [spacecraft] shall be designed such that it protects itself from information leakage due to electromagnetic signals emanations.{SV-CF-2,SV-MA-2}{PE-19,PE-19(1),RA-5(4),SA-8(19)}	This requirement applies if system components are being designed to address EMSEC and the measures taken to protect against compromising emanations must be in accordance with DODD S-5200.19, or superseding requirements.