Threat actors may attempt to fully replace the cryptographic keys on the spacecraft which could lockout the mission operators and enable the threat actor's communication channel. Once the encryption key is changed on the spacecraft, the spacecraft is rendered inoperable from the operators perspective as they have lost commanding access. Threat actors may exploit weaknesses in the key management strategy. For example, the threat actor may exploit the over-the-air rekeying procedures to inject their own cryptographic keys.
| ID | Name | Description | NIST Rev5 | D3FEND | ISO 27001 | |
| CM0028 | Tamper Protection | Perform physical inspection of hardware to look for potential tampering. Leverage tamper proof protection where possible when shipping/receiving equipment. | AC-14 AC-25 CA-8(1) CA-8(1) CA-8(3) CM-7(9) MA-7 PL-8 PL-8(1) PL-8(2) PM-30 PM-30(1) RA-3(1) SA-10(3) SA-10(4) SA-11 SA-3 SA-4(5) SA-4(9) SA-8 SA-8(11) SA-8(13) SA-8(16) SA-8(19) SA-8(31) SA-9 SC-51 SC-51 SR-1 SR-1 SR-10 SR-11 SR-11(3) SR-2 SR-2(1) SR-3 SR-4(3) SR-4(4) SR-5 SR-5 SR-5(2) SR-6(1) SR-9 SR-9(1) | D3-PH D3-AH D3-RFS D3-FV | A.5.8 4.4 6.2 7.5.1 7.5.2 7.5.3 10.2 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.5.2 A.5.4 A.5.8 A.5.14 A.5.22 A.5.23 A.8.21 A.8.29 A.8.30 5.2 5.3 7.5.1 7.5.2 7.5.3 A.5.1 A.5.2 A.5.4 A.5.19 A.5.31 A.5.36 A.5.37 A.5.19 A.5.20 A.5.21 A.8.30 A.5.20 A.5.21 A.5.20 A.5.21 A.5.23 A.8.29 | |
| CM0002 | COMSEC | A component of cybersecurity to deny unauthorized persons information derived from telecommunications and to ensure the authenticity of such telecommunications. COMSEC includes cryptographic security, transmission security, emissions security, and physical security of COMSEC material. It is imperative to utilize secure communication protocols with strong cryptographic mechanisms to prevent unauthorized disclosure of, and detect changes to, information during transmission. Systems should also maintain the confidentiality and integrity of information during preparation for transmission and during reception. Spacecraft should not employ a mode of operations where cryptography on the TT&C link can be disabled (i.e., crypto-bypass mode). The cryptographic mechanisms should identify and reject wireless transmissions that are deliberate attempts to achieve imitative or manipulative communications deception based on signal parameters. | AC-17 AC-17(1) AC-17(10) AC-17(10) AC-17(2) AC-18 AC-18(1) AC-2(11) AC-3(10) CA-3 IA-4(9) IA-5 IA-5(7) IA-7 PL-8 PL-8(1) SA-8(18) SA-8(19) SA-9(6) SC-10 SC-12 SC-12(1) SC-12(2) SC-12(3) SC-12(6) SC-13 SC-16(3) SC-28(1) SC-28(3) SC-7 SC-7(10) SC-7(11) SC-7(18) SC-7(5) SC-8(1) SC-8(3) SI-10 SI-10(3) SI-10(5) SI-10(6) SI-19(4) SI-3(8) | D3-ET D3-MH D3-MAN D3-MENCR D3-NTF D3-ITF D3-OTF D3-CH D3-DTP D3-NTA D3-CAA D3-DNSTA D3-IPCTA D3-NTCD D3-RTSD D3-PHDURA D3-PMAD D3-CSPP D3-MA D3-SMRA D3-SRA | A.5.14 A.6.7 A.8.1 A.8.16 A.5.14 A.8.1 A.8.20 A.5.14 A.8.21 A.5.16 A.5.17 A.5.8 A.5.14 A.8.16 A.8.20 A.8.22 A.8.23 A.8.26 A.8.12 A.5.33 A.8.20 A.8.24 A.8.24 A.8.26 A.5.31 A.5.33 A.8.11 | |
| CM0030 | Crypto Key Management | Leverage best practices for crypto key management as defined by organization like NIST or the National Security Agency. Leverage only approved cryptographic algorithms, cryptographic key generation algorithms or key distribution techniques, authentication techniques, or evaluation criteria. Encryption key handling should be performed outside of the onboard software and protected using cryptography. Encryption keys should be restricted so that they cannot be read via any telecommands. | CM-3(6) PL-8 PL-8(1) SA-3 SA-4(5) SA-8 SA-9(6) SC-12 SC-12(1) SC-12(2) SC-12(3) SC-12(6) SC-28(3) SC-8(1) | D3-CH D3-CP | A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.5.33 A.8.24 | |
| CM0032 | On-board Intrusion Detection & Prevention | Utilize on-board intrusion detection/prevention system that monitors the mission critical components or systems and audit/logs actions. The IDS/IPS should have the capability to respond to threats (initial access, execution, persistence, evasion, exfiltration, etc.) and it should address signature-based attacks along with dynamic never-before seen attacks using machine learning/adaptive technologies. The IDS/IPS must integrate with traditional fault management to provide a wholistic approach to faults on-board the spacecraft. Spacecraft should select and execute safe countermeasures against cyber-attacks. These countermeasures are a ready supply of options to triage against the specific types of attack and mission priorities. Minimally, the response should ensure vehicle safety and continued operations. Ideally, the goal is to trap the threat, convince the threat that it is successful, and trace and track the attacker — with or without ground support. This would support successful attribution and evolving countermeasures to mitigate the threat in the future. “Safe countermeasures” are those that are compatible with the system’s fault management system to avoid unintended effects or fratricide on the system. | AU-14 AU-2 AU-3 AU-3(1) AU-4 AU-4(1) AU-5 AU-5(2) AU-5(5) AU-6(1) AU-6(4) AU-8 AU-9 AU-9(2) AU-9(3) CA-7(6) CM-11(3) CP-10 CP-10(4) IR-4 IR-4(11) IR-4(12) IR-4(14) IR-4(5) IR-5 IR-5(1) PL-8 PL-8(1) RA-10 RA-3(4) RA-3(4) SA-8(21) SA-8(22) SA-8(23) SC-16(2) SC-32(1) SC-5 SC-5(3) SC-7(10) SC-7(9) SI-10(6) SI-16 SI-17 SI-3 SI-3(10) SI-3(8) SI-4 SI-4(1) SI-4(10) SI-4(11) SI-4(13) SI-4(13) SI-4(16) SI-4(17) SI-4(2) SI-4(23) SI-4(24) SI-4(25) SI-4(4) SI-4(5) SI-4(7) SI-6 SI-7(17) SI-7(8) | D3-FA D3-DA D3-FCR D3-FH D3-ID D3-IRA D3-HD D3-IAA D3-FHRA D3-NTA D3-PMAD D3-RTSD D3-ANAA D3-CA D3-CSPP D3-ISVA D3-PM D3-SDM D3-SFA D3-SFV D3-SICA D3-USICA D3-FBA D3-FEMC D3-FV D3-OSM D3-PFV D3-EHB D3-IDA D3-MBT D3-SBV D3-PA D3-PSMD D3-PSA D3-SEA D3-SSC D3-SCA D3-FAPA D3-IBCA D3-PCSV D3-FCA D3-PLA D3-UBA D3-RAPA D3-SDA D3-UDTA D3-UGLPA D3-ANET D3-AZET D3-JFAPA D3-LAM D3-NI D3-RRID D3-NTF D3-ITF D3-OTF D3-EI D3-EAL D3-EDL D3-HBPI D3-IOPR D3-KBPI D3-MAC D3-SCF | A.8.15 A.8.15 A.8.6 A.8.17 A.5.33 A.8.15 A.8.15 A.5.29 A.5.25 A.5.26 A.5.27 A.5.8 A.5.7 A.8.12 A.8.7 A.8.16 A.8.16 A.8.16 A.8.16 | |
| CM0042 | Robust Fault Management | Ensure fault management system cannot be used against the spacecraft. Examples include: safe mode with crypto bypass, orbit correction maneuvers, affecting integrity of telemetry to cause action from ground, or some sort of proximity operation to cause spacecraft to go into safe mode. Understanding the safing procedures and ensuring they do not put the spacecraft in a more vulnerable state is key to building a resilient spacecraft. | CP-2 CP-4(5) IR-3 IR-3(1) IR-3(2) PE-10 PE-10 PE-11 PE-11(1) PE-14 PL-8 PL-8(1) SA-3 SA-4(5) SA-8 SA-8(13) SA-8(24) SA-8(26) SA-8(3) SA-8(30) SA-8(4) SC-16(2) SC-24 SC-5 SI-13 SI-13(4) SI-17 SI-4(13) SI-4(7) SI-7(5) | D3-AH D3-EHPV D3-PSEP D3-PH D3-SCP | 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.7.11 A.7.11 A.7.5 A.7.8 A.7.11 A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.8.16 | |
| ID | Name | Description | STIX Pattern |
| UCEB-2 | Use of Old or Rotated Cryptographic Keys for Authentication | Detection of authentication attempts using cryptographic keys that have already been rotated or marked as no longer valid. This may indicate that threat actors are using old or compromised keys to try to access to spacecraft or C2 systems. | [x-opencti-cryptographic-key:status = 'rotated or expired'] |
| UCEB-3 | Unexpected Access to Cryptographic Keys | Detection of unauthorized access to cryptographic keys used for decryption, suggesting that a threat actor may be attempting to disable or bypass the spacecraft's encryption mechanisms. | [x-opencti-cryptographic-key:access_time != 'authorized_access_time' AND x-opencti-cryptographic-key:usage = 'decryption'] |
| UCEB-4 | Unexpected Changes to Encryption Configuration Settings | Detection of unexpected changes to encryption settings, potentially indicating that the encryption mechanism on the spacecraft has been disabled or bypassed without authorization. | [x-opencti-encryption-config:status = 'disabled' AND x-opencti-encryption-config:change_time != 'authorized_change_time'] |
| UCEB-7 | Modification of Encryption Algorithms | Detection of unauthorized modifications to the spacecraft�s encryption algorithm, potentially indicating that a threat actor is attempting to weaken or disable the encryption mechanism to enable exfiltration or other attacks. | [x-opencti-encryption-algorithm:algorithm != 'expected_algorithm' AND x-opencti-encryption-algorithm:modification_time != 'authorized_time'] |
| UCEB-11 | Use of Account or Cryptographic Keys at Unexpected Times | Detection of a user account or cryptographic key being used outside of the expected operational time windows. This may indicate unauthorized or suspicious activity, such as a threat actor using valid credentials or cryptographic keys to gain or maintain persistent access to the spacecraft or related systems. | [user-account:last_login_time != 'expected_operational_hours' OR x-opencti-cryptographic-key:usage_time != 'expected_usage_time'] |
| CSNE-16 | Suspicious Network Traffic Without Expected Encryption | Detection of unencrypted telemetry data being transmitted to the ground station when encryption is expected, potentially indicating that encryption has been bypassed to enable unauthorized data exfiltration. | [network-traffic:encryption_status != 'encrypted' AND network-traffic:protocols[*] = 'satellite_communication' AND network-traffic:dst_ref.role = 'ground_station'] |
| MIRE-12 | Unexpected Modification to Encryption Memory/Table | Detection of an unauthorized modification to the encryption table, suggesting a potential malicious update affecting the telemetry, tracking, and control (TT&C) encryption settings. The change occurred in the memory range Value1 - Value999. The memory range will be different for each spacecraft. | [x-opencti-memory:table_ref.name = 'encryption_table' AND x-opencti-memory:checksum != 'expected_checksum' AND x-opencti-memory:range = 'Value1 - Value999'] |
| DISE-1 | File or Data Integrity Check Failure | Monitors the cryptographic integrity of data (files, payload data, configuration file, logs, etc.) to ensure it remains unmodified during data storage or transmission. It is important during engineering to determine the critical data items that need integrity protection. Some example are discussed in evasion technique https://sparta.aerospace.org/technique/DE-0003/ | [file:hashes != 'expected_hash_value' AND file:name = 'data_file'] |