In shared launches, multiple independent payloads cohabit common infrastructure until separation. If isolation is incomplete (e.g., shared data buses, mispartitioned deployer controllers, common logging/telemetry collectors, or cross-connected laptops and recorders), a compromise in one payload’s domain can be leveraged to observe or influence another’s traffic before release. Threat actors exploit these transient but real connections to read configuration, pivot through deployer control paths, or stage data/commands that execute as neighboring payloads power and check out, enabling cross-payload access or tampering prior to independent flight.
| ID | Name |
|---|---|
| LM-0006.01 | Rideshare Payload |
| ID | Name | Tiering | Description | NIST Rev5 | ISO 27001 | Onboard SV | Ground | |
| CM0040 | Shared Resource Leakage | Shared system resources (e.g., processor registers, main memory, secondary storage, cache) may retain residual data or security-relevant state after a process releases them for reuse. If a subsequent process can access that residual information, it may obtain data from the prior process, including sensitive information or encrypted representations of information that were not intended to cross process or partition boundaries. This countermeasure requires that shared resources be sanitized, zeroed, or otherwise cleared of prior process data before being allocated to a new process, ensuring that information transfer between processes occurs only through explicitly authorized channels. The protection must apply to encrypted representations as well as plaintext because encrypted data remains information belonging to the prior process and must not be transferred to another process solely because its contents are not immediately readable. This is particularly significant in space system environments where multiple processes of varying criticality and trust levels may share the same hardware resources. | AC-4(23) AC-4(25) SA-8(19) SA-8(2) SA-8(5) SA-8(6) SC-2(2) SC-3(4) SC-32(1) SC-4 SC-49 SC-50 SC-7(29) | A.8.11 A.8.10 | ||||
| CM0039 | Least Privilege | The principle of least privilege requires that every process, user account, service, and system component be granted only the permissions and access rights necessary to perform its defined function, with no additional privileges retained beyond what the assigned task requires. Applied to spacecraft and ground systems, this means that processes executing on flight computers, operating system services, ground system applications, and inter-system communication handlers are each confined to the minimum privilege level needed for their specific function, preventing a compromised or malfunctioning component from leveraging excess permissions to affect other system resources or functions. Separate execution domains should be used where supported to reinforce least privilege and contain process failures or compromise. Process isolation does not replace explicit access controls, because authorized communication and shared resources may still cross execution-domain boundaries. Least privilege is a foundational design principle that reduces the consequence of any individual component compromise by limiting what an adversary can accomplish within that component's execution context. | AC-2 AC-3(13) AC-3(15) AC-4(2) AC-6 CA-3(6) CM-7 CM-7(5) CM-7(8) PL-8 PL-8(1) SA-17(7) SA-3 SA-4(9) SA-8 SA-8(13) SA-8(14) SA-8(15) SA-8(19) SA-8(3) SA-8(4) SA-8(9) SC-2(2) SC-32(1) SC-49 SC-50 SC-7(29) | A.5.16 A.5.18 A.8.2 A.5.15 A.8.2 A.8.18 A.8.19 A.8.19 A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 | ||||
| CM0038 | Segmentation | Segmentation establishes physical or logical isolation boundaries between spacecraft system components and functional domains to limit the propagation of compromise, contain the consequences of a security failure, and enforce controlled information flow across the mission architecture. Mission-critical functions must be isolated from non-mission-critical functions through enforced partition boundaries that control access to and protect the integrity of the hardware, software, and firmware implementing those functions. Information flow between partitioned components or applications must be explicitly authorized by security policy; any flow not affirmatively permitted is denied by default. Boundary protections must be implemented to separate spacecraft bus, communications, and payload components, preventing a compromise in one domain from directly affecting the others. Information crossing the spacecraft boundary shall receive confidentiality protection where required by its classification, sensitivity, or mission risk. Command-bearing and other security-critical exchanges shall receive the mission-required authentication, integrity, authorization, and anti-replay protections regardless of whether confidentiality is required. These controls collectively implement a defense-in-depth architecture in which an adversary who gains a foothold in one partition faces enforced barriers before reaching mission-critical assets. | AC-4 AC-4(14) AC-4(2) AC-4(24) AC-4(26) AC-4(31) AC-4(32) AC-4(6) AC-6 CA-3 CA-3(7) PL-8 PL-8(1) SA-3 SA-8 SA-8(13) SA-8(15) SA-8(18) SA-8(3) SA-8(4) SA-8(9) SC-16(3) SC-2(2) SC-3 SC-3(4) SC-32 SC-32(1) SC-39 SC-4 SC-49 SC-50 SC-6 SC-7(20) SC-7(21) SC-7(29) SC-7(5) SI-17 SI-4(7) | A.5.14 A.8.22 A.8.23 A.5.15 A.8.2 A.8.18 A.5.14 A.8.21 A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 | ||||