Compromising the ground segment gives an adversary the most direct path to first execution against a spacecraft. Ground systems encompass operator workstations and mission control mission control software, scheduling/orchestration services, front-end processors and modems, antenna control, key-loading tools and HSMs, data gateways (SLE/CSP), identity providers, and cloud-hosted mission services. Once inside, a threat actor can prepare on-orbit updates, craft and queue valid telecommands, replay captured traffic within acceptance windows, or manipulate authentication material and counters to pass checks. The same foothold enables deep reconnaissance: enumerating mission networks and enclaves, discovering which satellites are operated from a site, mapping logical topology between MOC and stations, identifying in-band “birds” reachable from a given aperture, and learning pass plans, dictionaries, and automation hooks. From there, initial access to the spacecraft is a matter of timing and presentation, injecting commands, procedures, or update packages that align with expected operations so the first execution event appears indistinguishable from normal activity.
| ID | Name | Tiering | Description | NIST Rev5 | ISO 27001 | Onboard SV | Ground | |
| CM0001 | Protect Sensitive Information | Space mission sensitive information spans a broad attack surface and must be inventoried, classified, and protected at a level commensurate with its sensitivity across every location where it resides, including ground systems, contractor networks, and remote access environments. Sensitive material typically includes functional and performance specifications, interface control documents (ICDs), command and telemetry (C&T) databases, uplink protection schemes including disable and bypass features, fault management logic, scripts, simulation and rehearsal results, failure and anomaly resolution records, and architecture and software documentation. Each information type must be assigned a protection level, such as unclassified, controlled, proprietary, or classified, and access must be restricted to personnel with defined roles and a verified need to know. Sensitive data shall be protected at rest and in transit using encryption or other mission-approved safeguards commensurate with its classification, sensitivity, threat exposure, and operational constraints. DLP capabilities shall be applied to systems and data flows where they are technically feasible and effective, with alternative access controls, monitoring, or information-flow protections used where conventional DLP technology is not suitable. Ongoing configuration management must track, control, and document all changes to command procedures and critical database content to prevent unauthorized modification and mission degradation. | AC-25 AC-3(11) AC-4(23) AC-4(25) AC-4(6) CA-3 CM-12 CM-12(1) PL-8 PL-8(1) PM-11 PM-17 SA-3 SA-3(1) SA-3(2) SA-4(12) SA-5 SA-8 SA-8(19) SA-9(7) SC-16 SC-16(1) SC-8(1) SC-8(3) SI-12 SI-21 SI-23 SR-12 SR-7 | A.8.4 A.8.11 A.8.10 A.5.14 A.8.21 A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.33 7.5.1 7.5.2 7.5.3 A.5.37 A.8.27 A.8.28 A.5.33 A.8.10 A.5.22 | ||||
| CM0052 | Insider Threat Protection | Insider threats represent a distinct and particularly difficult risk category for space mission security, as individuals with authorized access to mission systems, facilities, and commanding infrastructure can cause significant damage without needing to overcome the external access controls that defend against outside adversaries. An insider threat program establishes the organizational, procedural, and technical controls necessary to deter, detect, and respond to malicious or negligent actions by personnel with legitimate access, including attempts by insiders to masquerade as other authorized individuals to access commanding functions or sensitive mission infrastructure under a false identity. The program must address both the technical controls that limit what any individual can do with their authorized access and the procedural and behavioral controls that create accountability, reduce opportunity, and enable early detection of concerning patterns. Effective insider threat protection requires integration across personnel security, access management, monitoring, and incident response functions, treating the insider threat as an ongoing operational risk to be managed continuously rather than a problem solved by initial personnel vetting alone. | AC-14 AC-3(11) AC-3(13) AC-3(15) AC-6 AT-2 AT-2(2) AT-2(4) AT-2(5) AT-2(6) AU-10 AU-12 AU-13 AU-6 AU-7 CA-7 CP-2 IA-12 IA-12(1) IA-12(2) IA-12(3) IA-12(4) IA-12(5) IA-12(6) IA-4 IR-2(3) IR-4 IR-4(6) IR-4(7) MA-7 MP-7 PE-2 PL-8 PL-8(1) PM-12 PM-14 PS-3 PS-4 PS-5 PS-8 RA-10 SA-3 SA-8 SC-38 SC-7 SI-4 SR-11(2) | A.8.4 A.5.15 A.8.2 A.8.18 7.3 A.6.3 A.8.7 A.5.25 A.6.8 A.8.15 A.8.15 A.8.12 A.8.16 9.1 9.3.2 9.3.3 A.5.36 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.5.16 A.5.25 A.5.26 A.5.27 A.5.10 A.7.10 A.7.2 A.5.8 A.6.1 A.5.11 A.6.5 A.5.11 A.6.5 7.3 A.6.4 A.5.7 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.5.14 A.8.16 A.8.20 A.8.22 A.8.23 A.8.26 A.8.16 | ||||
| CM0054 | Two-Person Rule | The two-person rule (TPR) requires that all access to and actions within systems possessing command-level authority over the spacecraft be conducted in the continuous presence of two separately authorized individuals, neither of whom alone can complete the access or action. This control reduces the opportunity for unauthorized, coerced, erroneous, or malicious commanding by requiring two independently authorized individuals to participate in the protected access or action. Its effectiveness depends on individual attribution, independent review, resistance to credential sharing or account misuse, and protection against collusion or bypass of the enforcement mechanism. The TPR requires two distinct, appropriately authorized individuals to participate in the same protected access or action. Participation may be physically co-located, remotely performed through authenticated technical controls, or implemented through a combination of physical and logical mechanisms, as defined by mission policy. The second individual must independently review and approve the specific access or action before it is completed. Under CM0054, the two-person rule applies to access and actions involving systems with command-level access to the spacecraft to include reprograming the flight computer/flight software. If the mission tailors the rule to selected commanding functions, the retained scope, excluded access and actions, compensating controls, and associated risk acceptance must be explicitly documented and approved. | AC-14 AC-3(13) AC-3(15) AC-3(2) AU-9(5) CP-2 IA-12 IA-12(1) IA-12(2) IA-12(3) IA-12(4) IA-12(5) IA-12(6) PE-3 SA-8(15) | 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.7.1 A.7.2 A.7.3 A.7.4 | ||||
| CM0033 | Relay Protection | Replay attacks capture and later retransmit previously valid authentication messages, frames, credentials, or tokens. Relay attacks forward an authentication exchange in real time between legitimate endpoints, causing an endpoint to authenticate a connection or action that the adversary is relaying without requiring compromise of the underlying cryptographic keys. Relay- and replay-resistant authentication mechanisms must be implemented when establishing remote connections or security associations with the spacecraft and for authenticated communications on spacecraft internal buses. The protections must prevent previously accepted authentication material or authenticated traffic from being reused outside its authorized context. Replay resistance should use freshness and anti-reuse mechanisms such as nonces, sequence numbers, timestamps where operationally suitable, and managed anti-replay windows. Relay resistance additionally requires authentication to be cryptographically bound to the intended endpoints, security association, session or channel context, and authenticated action. Challenge-response authentication provides replay resistance when fresh challenges are used but does not, by itself, prevent an adversary from relaying the challenge and response between legitimate endpoints. These protections must be applied at both external interface boundaries, including ground-to-spacecraft command links and crosslinks, and internal spacecraft bus connections where component-to-component authentication is implemented. | AC-17(10) IA-2(8) IA-3 IA-3(1) IA-4 IA-7 SC-13 SC-16(1) SC-23 SC-23(1) SC-23(3) SC-7 SC-7(11) SC-7(18) SI-10 SI-10(5) SI-10(6) SI-3(8) | A.5.16 A.5.14 A.8.16 A.8.20 A.8.22 A.8.23 A.8.26 A.8.24 A.8.26 A.5.31 | ||||
| CM0004 | Development Environment Security | A secure development environment requires a current and sufficiently complete inventory of the people, devices, software, services, credentials, and automated identities capable of accessing or influencing the environment. The development environment includes source-code repositories, developer workstations, build servers, CI/CD runners, compiler and linker toolchains, container and virtual machine images, package registries, artifact repositories, signing systems, test environments, integration laboratories, and release-staging systems. For space systems, these environments may produce or manage flight software images, firmware, FPGA bitstreams, software-defined radio waveforms, command and telemetry databases, configuration tables, ephemerides, calibration products, fault-management logic, and on-orbit update packages. Unmanaged assets, unauthorized access, compromised dependencies, altered toolchains, and untrusted build services are significant pathways through which adversaries may maliciously modify software or other mission artifacts during development and build activities. All personnel and assets touching the development environment must be inventoried and actively managed. MFA shall be enforced for human access, while non-human identities shall use managed workload identities, scoped credentials, protected secrets, and defined rotation or expiration period, with particular rigor applied to code repositories, where threat actors may attempt to inject malicious code into software under development without detection. Zero-trust access controls should govern repository access, with protected branch and tag policies shall restrict direct modification, prohibit unauthorized force pushes or deletion, require successful security checks, and require independent review before merging or releasing critical code. Effective development environment security also requires integrated change management, privilege management, comprehensive audit logging, and continuous in-depth monitoring across all components of the environment. | AC-17 AC-18 AC-20(5) AC-3(11) AC-3(13) AC-3(15) CA-8 CA-8(1) CM-11 CM-14 CM-2(2) CM-3(2) CM-3(7) CM-3(8) CM-4(1) CM-5(6) CM-7(8) CP-2(8) MA-7 PL-8 PL-8(1) PL-8(2) PM-30 PM-30(1) RA-3(1) RA-3(2) RA-5 RA-5(2) RA-9 SA-10 SA-10(4) SA-11 SA-11(1) SA-11(2) SA-11(4) SA-11(5) SA-11(6) SA-11(7) SA-11(8) SA-15 SA-15(3) SA-15(5) SA-15(7) SA-15(8) SA-17 SA-3 SA-3(1) SA-3(2) SA-4(12) SA-4(3) SA-4(5) SA-4(9) SA-8 SA-8(19) SA-8(30) SA-8(31) SA-9 SC-38 SI-2 SI-2(6) SI-7 SR-1 SR-11 SR-2 SR-2(1) SR-3 SR-3(2) SR-4 SR-4(1) SR-4(2) SR-4(3) SR-4(4) SR-5 SR-5(2) SR-6 SR-6(1) SR-7 | A.8.4 A.5.14 A.6.7 A.8.1 A.5.14 A.8.1 A.8.20 A.8.9 A.8.9 A.8.31 A.8.19 A.5.30 A.5.8 4.4 6.2 7.5.1 7.5.2 7.5.3 10.2 A.8.8 A.5.22 A.5.2 A.5.8 A.8.25 A.8.31 A.8.33 A.8.28 A.8.27 A.8.28 A.5.2 A.5.4 A.5.8 A.5.14 A.5.22 A.5.23 A.8.21 A.8.9 A.8.28 A.8.30 A.8.32 A.8.29 A.8.30 A.8.28 A.5.8 A.8.25 A.8.28 A.8.25 A.8.27 A.6.8 A.8.8 A.8.32 5.2 5.3 7.5.1 7.5.2 7.5.3 A.5.1 A.5.2 A.5.4 A.5.19 A.5.31 A.5.36 A.5.37 A.5.19 A.5.20 A.5.21 A.8.30 A.5.20 A.5.21 A.5.21 A.8.30 A.5.20 A.5.21 A.5.23 A.8.29 A.5.22 A.5.22 | ||||
| CM0011 | Vulnerability Scanning | Vulnerability scanning systematically identifies known security weaknesses in commercial off-the-shelf (COTS) and open-source software (OSS) components, including vulnerable dependencies and outdated software versions, across spacecraft and ground system environments. Custom-developed code requires separate analysis approaches, such as static and dynamic code analysis, that fall outside the scope of this countermeasure; however, COTS, OSS, and third-party dependencies incorporated into custom-developed software remain within the scope of vulnerability scanning and SCA. Scanning programs should incorporate software composition analysis (SCA) to detect vulnerabilities introduced through third-party libraries and dependency chains, which represent a significant and frequently underestimated attack surface in modern space systems. Scanning tools and processes should conform to recognized interoperability standards that support enumeration of platforms, software flaws, and configuration weaknesses; standardized formatting of checklists and test procedures; and consistent measurement of vulnerability impact. Adherence to these standards enables automation of key vulnerability management workflow steps, facilitates tool interoperability across the mission ecosystem, and produces outputs that are comparable across programs and organizations. Vulnerability scanning shall be performed against the approved as-built or deployed software baseline using methods that do not jeopardize mission operations. Active scanning of live spacecraft, safety-critical ground systems, or operational technology should occur only after the scanning method has been authorized and evaluated for operational impact. Where live scanning presents unacceptable risk, scanning should be performed against representative software images, firmware packages, or test environments that match the approved operational baseline. | CM-10(1) RA-3 RA-5 RA-5(11) RA-5(3) RA-7 SA-11 SA-11(3) SA-15(7) SA-3 SA-4(5) SA-8 SA-8(30) SI-3 SI-3(10) SI-7 | 6.1.2 8.2 9.3.2 A.8.8 A.8.8 6.1.3 8.3 10.2 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.8.29 A.8.30 A.8.7 | ||||
| CM0012 | Software Bill of Materials | A software bill of materials (SBOM) is a structured inventory of software components, libraries, dependencies, and associated metadata comprising a delivered system, spanning first-party code and available third-party and open-source supply-chain information. The SBOM serves as the foundational reference for continuous vulnerability management: by cross-correlating the component inventory against known vulnerability databases, such as those cataloging common vulnerabilities and exposures (CVEs), mission owners and operators can rapidly identify which specific system components are affected by newly disclosed vulnerabilities and prioritize remediation accordingly. SBOM generation must cover the full software supply chain, including transitive dependencies that are not explicitly declared in top-level manifests, as these indirect inclusions represent a persistent and frequently exploited blind spot in software inventory programs. An SBOM may reveal component composition and vulnerability-relevant information that could assist adversary reconnaissance. Its classification, sensitivity, dissemination, and handling requirements shall be determined using applicable mission guidance, contractual requirements, and a documented disclosure-risk assessment. If deemed to have sensitive information then the handling controls applied should align to other mission-critical security documentation as defined in CM0001. | CM-10 CM-10(1) CM-11 CM-11(3) CM-2 CM-5(6) CM-7(4) CM-7(5) CM-8 CM-8(7) PM-5 RA-5 RA-5(11) SA-10(2) SA-10(4) SA-11 SA-11(3) SA-3 SA-4(5) SA-8 SA-8(13) SA-8(29) SA-8(30) SA-8(7) SA-9 SI-7 | A.8.9 A.8.19 A.8.19 A.5.9 A.8.9 A.5.32 A.8.19 A.8.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.5.2 A.5.4 A.5.8 A.5.14 A.5.22 A.5.23 A.8.21 A.8.29 A.8.30 | ||||
| CM0013 | Dependency Confusion | Dependency confusion is a software supply chain attack in which an adversary publishes a malicious package to a public repository using the same name as an organization's internal private package, exploiting build tools that may inadvertently resolve the public version over the intended internal one. Mitigating this attack requires a layered set of controls: internal dependencies must be sourced exclusively from private, controlled repositories rather than public package registries; build and continuous integration and continuous delivery (CI/CD) pipeline configurations must explicitly define trusted repository sources and resolution order to prevent inadvertent public package substitution; and dependency integrity must be validated at the point of consumption by verifying that cryptographic checksums match those of the known-good official packages. A secure build environment is a prerequisite for these controls to be effective, as a compromised build environment can undermine dependency controls regardless of repository configuration. Together, these measures ensure that only verified, intended dependencies are incorporated into flight software, ground system software, and supporting toolchains. | CM-10(1) CM-11 CM-2 CM-5(6) RA-5 SA-11 SA-3 SA-8 SA-8(30) SA-8(7) SA-8(9) SA-9 SI-7 | A.8.9 A.8.19 A.8.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.5.2 A.5.4 A.5.8 A.5.14 A.5.22 A.5.23 A.8.21 A.8.29 A.8.30 | ||||
| CM0015 | Software Source Control | Binary or machine-executable code obtained from sources that provide no warranty and no access to the corresponding source code must not be incorporated into spacecraft or ground systems. This prohibition addresses a fundamental software assurance gap: without source code, missions cannot perform source-based static analysis or independently review and modify implementation details, and may have reduced ability to assess, repair, or extend the software. Code from sources with limited or no warranty and no source code provision may be difficult to independently analyze, repair, or extend and leaves the mission dependent on supplier assurances and remediation capabilities. This countermeasure applies throughout the software supply chain, including components integrated by subcontractors. | CM-11 CM-14 CM-2 CM-4 CM-5(6) CM-7(8) SA-10(2) SA-10(4) SA-11 SA-3 SA-4(5) SA-4(9) SA-8 SA-8(19) SA-8(29) SA-8(30) SA-8(31) SA-8(7) SA-9 SI-7 | A.8.9 A.8.9 A.8.19 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.5.2 A.5.4 A.5.8 A.5.14 A.5.22 A.5.23 A.8.21 A.8.29 A.8.30 | ||||
| CM0016 | CWE List | A prioritized list of software weakness classes, drawn from a recognized weakness enumeration taxonomy such as the common weakness enumeration (CWE) framework, provides the analytical foundation for targeted, mission-relevant static code analysis. Rather than treating all weakness classes as equally significant, mission teams should derive a system-specific priority ranking based on the spacecraft or ground system's architecture, threat environment, operational constraints, and consequence of exploitation for each weakness class. This prioritized list serves two functions: it directs static analysis tool configuration toward the weakness classes most relevant to the mission, and it provides a defensible, documented basis for triaging and ranking analysis findings so that remediation resources are applied where mission risk is highest. The prioritization rationale should be documented and maintained as a controlled artifact, as it reflects security-relevant design decisions about the system's risk posture. | RA-5 SA-11 SA-11(1) SA-15(7) SI-7 | A.8.8 A.8.29 A.8.30 A.8.28 | ||||
| CM0017 | Coding Standard | A formally defined coding standard establishes the rules, conventions, and constraints that govern how software is written across the mission's development program, directly influencing the security, maintainability, and verifiability of the delivered system. The standard must specify acceptable programming language types, with language selection driven by a documented evaluation of security requirements, application complexity, scalability needs, available development resources, schedule constraints, and the availability of security-relevant language features such as memory safety, type safety, and bounds checking. Language choices that introduce classes of vulnerability by design, such as languages without memory safety guarantees used in contexts where memory corruption is a plausible attack vector, require explicit justification and compensating controls. The coding standard must include security-relevant rules for input validation, error handling, cryptographic usage, memory management, and concurrency, as applicable to the selected languages and system design. Adherence should be evaluated through automated means where supported, supplemented by manual review for requirements that cannot be reliably automated. | PL-8 PL-8(1) SA-11 SA-11(3) SA-15 SA-3 SA-4(9) SA-8 SA-8(30) SA-8(7) SI-7 | A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.8.29 A.8.30 A.5.8 A.8.25 | ||||
| CM0018 | Dynamic Testing | Dynamic analysis subjects executing software and firmware to active testing conditions to identify weaknesses and vulnerabilities that static analysis alone cannot detect, including runtime memory corruption, logic errors, timing vulnerabilities, and interface behaviors that only manifest under operational conditions. Applicable techniques include simulation-based testing, penetration testing, fuzz testing, and adversarial emulation using realistic threat actor tactics, techniques, and procedures (TTPs). Dynamic testing must be applied to all software and firmware categories: mission-developed code, open-source components, commercial off-the-shelf (COTS) software, and third-party developed code. Dynamic testing should be performed on potential system elements before acceptance, include realistic simulation of known adversary TTPs, and tools, and continue throughout the lifecycle on applicable physical and logical systems, elements, and processes. Full-scale hardware integration testbeds, commonly referred to as flat satellite (FLATSAT) environments, provide high-fidelity physical test platforms for dynamic analysis; digital twins implemented via instruction set simulation, also known as emulation, provide a flexible and scalable alternative environment capable of supporting TTP execution across a broad range of test scenarios without requiring physical hardware availability. | CA-8 CA-8(1) CM-4(2) CP-4(5) RA-3 RA-5(11) RA-7 SA-11 SA-11(3) SA-11(5) SA-11(8) SA-11(9) SA-3 SA-8 SA-8(30) SC-2(2) SC-7(29) SI-3 SI-3(10) SI-7 SR-6(1) | 6.1.2 8.2 9.3.2 A.8.8 6.1.3 8.3 10.2 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.8.29 A.8.30 A.8.7 | ||||
| CM0019 | Static Analysis | Static source code analysis examines software without executing it, identifying security-relevant weaknesses in the codebase before they can be exploited at runtime. Static analysis must be performed across all available source code. The mission’s weakness prioritization (i.e., CM0016) process should guide tool configuration and finding triage without unnecessarily excluding other weakness classes supported by the tools. The static analysis program must employ no fewer than two distinct tools with complementary language and weakness-detection capabilities. The tools should be applied at defined points throughout the development and maintenance lifecycle to provide overlapping and complementary analysis coverage and reduce the likelihood that exploitable weaknesses persist into integration or deployment. Tool selection should account for language compatibility, weakness class coverage, and the ability to produce findings in formats that support triage and remediation tracking. Static analysis should be integrated into the software build pipeline as an automated, recurring activity rather than conducted as a periodic manual exercise, ensuring that new code contributions are analyzed continuously throughout development. | CM-4(2) RA-3 RA-5 RA-7 SA-11 SA-11(1) SA-11(3) SA-11(4) SA-15(7) SA-3 SA-8 SA-8(30) SI-7 | 6.1.2 8.2 9.3.2 A.8.8 A.8.8 6.1.3 8.3 10.2 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.8.29 A.8.30 A.8.28 | ||||
| CM0021 | Software Digital Signature | Each software or firmware image subject to installation or update control shall be verified using an approved digital signature and an approved trust anchor before installation or activation. The trust anchor may be represented by a certificate or by a directly provisioned verification key, depending on the approved trust architecture. Successful verification establishes that the image was signed by an authorized signing identity and has not been modified since signing; it does not establish that the signed code is non-malicious, vulnerability-free, or operationally safe. Signature verification confirms the integrity and approved origin of the software but does not, by itself, prevent installation of an older validly signed version; update authorization and rollback protections must be enforced separately. The verification mechanism must be implemented such that it cannot be bypassed through operational commands, configuration changes, or software updates, and must reject any component whose signature is absent or invalid, or whose signing certificate or trust anchor is not recognized and approved by the mission. Digital signature enforcement complements but is distinct from the boot-time chain of trust established through secure boot; it applies to software installation and update events throughout the operational lifecycle, not only at system startup. | AC-14 CM-11 CM-11(3) CM-14 CM-5(6) IA-2 SA-10(1) SA-11 SA-4(5) SA-8(29) SA-8(31) SA-9 SI-7 SI-7(1) SI-7(12) SI-7(15) SI-7(6) | A.8.19 A.5.16 A.5.2 A.5.4 A.5.8 A.5.14 A.5.22 A.5.23 A.8.21 A.8.29 A.8.30 | ||||
| CM0023 | Configuration Management | Configuration management (CM) for space systems requires automated mechanisms to establish, maintain, validate, and report on the approved baseline configuration of spacecraft and supporting ground systems, ensuring the baseline remains current, complete, and accurate throughout the mission lifecycle. Automated mechanisms should support configuration management by improving the accuracy, currency, and validation of configuration records. Automation does not replace formal change control, engineering review, approval, or other configuration management activities that require human judgment. The approved baseline must be readily accessible to authorized personnel for operational decision-making, anomaly investigation, and change impact assessment. Deviations between the documented baseline and the actual system configuration represent both security and operational risk because undocumented changes may introduce vulnerabilities, mask adversary activity, or produce unpredictable system behavior. Automated validation should identify and report configuration drift at mission-defined intervals or following relevant change events, based on system observability and mission risk. | CM-11(3) CM-2 CM-3(4) CM-3(6) CM-3(7) CM-3(8) CM-4 CM-5 CM-5(6) MA-7 SA-10 SA-10(2) SA-10(7) SA-11 SA-3 SA-4(5) SA-4(9) SA-8 SA-8(29) SA-8(30) SA-8(31) SI-7 SR-11(2) | A.8.9 A.8.9 A.8.9 A.8.9 A.8.2 A.8.4 A.8.9 A.8.19 A.8.31 A.8.3 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.8.9 A.8.28 A.8.30 A.8.32 A.8.29 A.8.30 | ||||
| CM0055 | Secure Command Mode(s) | Secure command modes provide additional layers of restriction on spacecraft command acceptance beyond standard authentication and encryption, constraining when, where, and under what operational conditions the spacecraft will process commands. These supplemental controls reduce the window of opportunity for unauthorized commanding by limiting command receptivity to defined parameters that an adversary would need to satisfy simultaneously with authentication requirements, substantially increasing the difficulty of a successful command injection attack. Specific implementations include geographic restriction, in which the spacecraft accepts commands only when in contact with designated ground station locations; operational mode restrictions, in which special flight software (FSW) modes must be active before certain command categories are accepted; and temporal controls, in which the spacecraft enforces time-bounded windows during which commands are valid. These mechanisms complement command authentication, integrity protection, anti-replay controls, and authorization and do not replace them. Encryption should also be applied where command confidentiality is required. Secure command modes may combine geographic, temporal, operational-state, source, or other mission-defined conditions according to the active command policy. Secure command modes helps create a multi-dimensional command acceptance policy that an adversary must defeat in its entirety to achieve unauthorized command execution. | AC-17(1) AC-17(10) AC-2(11) AC-2(12) AC-3 AC-3(2) AC-3(3) AC-3(4) AC-3(8) CA-3(7) IA-10 PL-8 PL-8(1) SA-3 SA-8 SC-7 SI-3(8) | A.8.16 A.5.15 A.5.33 A.8.3 A.8.4 A.8.18 A.8.20 A.8.2 A.8.16 A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.5.14 A.8.16 A.8.20 A.8.22 A.8.23 A.8.26 | ||||
| CM0005 | Ground-based Countermeasures | Ground-based countermeasures protect the terrestrial capabilities that develop, launch, command, monitor, operate, secure, and sustain space missions. These capabilities may be distributed across mission-owned systems, contractor environments, external partners, and commercial service providers. Because ground segment architectures and responsibilities vary, cybersecurity protections should be selected through threat-informed analysis of the mission functions being performed rather than through indiscriminate application of a single control set. The SPARTA Ground Segment Cyber Defenses guidance provides an interactive functional decomposition that maps ground segment function groups to applicable Defense-in-Depth sub-layers and countermeasure targets. The supporting report, VTR-2026-00702 Rev A, Ground Segment Cyber Defenses and Risk-Based Tiering, provides the methodology, definitions, and risk-tier rationale. The accompanying Ground Segment Cyber Defenses Excel Workbook consolidates the function mappings and Baseline and Enhanced countermeasure guidance into a resource that can be tailored to a specific mission architecture. | SPARTA Ground Segment Cyber Defenses guidance | None | ||||
| CM0034 | Monitor Critical Telemetry Points | Monitoring defined spacecraft telemetry points provides a key source of evidence for detecting adversary activity against on-orbit systems, where observability is largely limited to the events and conditions the spacecraft can sense, record, and report. Monitored telemetry must include both accepted and rejected commands, command mode transitions, command counters, and other indicators of commanding activity, enabling detection of unauthorized command attempts that fail authentication as well as anomalous patterns in legitimate command traffic. Monitoring scope should include RF and link-quality indicators that support detection and triage of interference or suspected jamming. These indicators should be correlated with expected link conditions and other available evidence before hostile activity is concluded. Security-relevant telemetry should be integrated and time-correlated with ground-based defensive cyber operations infrastructure, including security information and event management (SIEM) and audit platforms, to provide unified space-system cybersecurity situational awareness. The resulting view should correlate spacecraft observations with relevant ground-system security events while accounting for telemetry latency, contact availability, and other observability limitations. | AC-17(1) AU-3(1) CA-7(6) IR-4(14) PL-8 PL-8(1) SA-8(13) SC-16 SC-16(1) SC-7 SI-3(8) SI-4(7) | A.8.16 A.5.8 A.5.14 A.8.16 A.8.20 A.8.22 A.8.23 A.8.26 | ||||
| CM0035 | Protect Authenticators | Authenticators and associated authenticator material, including passwords, secret and private keys, tokens, biometric templates, shared secrets, certificates, and trust-store entries, must be protected against unauthorized modification and, where the material is confidential, unauthorized disclosure throughout their lifecycle. Disclosure of secret authenticator material may enable adversaries to impersonate legitimate users or systems. Unauthorized modification of authenticators, certificates, or trust information can deny access to legitimate entities, substitute adversary-controlled credentials, or corrupt the trust basis of mission authentication mechanisms. Protection must apply to authenticators at rest, in transit, and in use, and must extend to all forms and storage locations, including credential databases, configuration files, embedded device credentials, hardware security tokens, and cryptographic key stores. Authenticator protection is a prerequisite for the effectiveness of any authentication-based access control; an authentication system whose authenticators are unprotected provides no meaningful security regardless of the strength of the underlying authentication protocol. | AC-17(6) AC-3(11) CM-3(6) IA-4(9) IA-5 IA-5(6) PL-8 PL-8(1) SA-3 SA-4(5) SA-8 SA-8(13) SA-8(19) SC-16 SC-16(1) SC-8(1) | A.8.4 A.5.16 A.5.17 A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.5.33 | ||||
| CM0053 | Physical Security Controls | Physical security controls form the outermost defensive layer protecting systems that can command the spacecraft, limiting access to commanding infrastructure to personnel who are both identity-verified and specifically authorized to be in those environments. Unauthorized physical access may enable theft, tampering, connection to exposed interfaces, use of unattended sessions, or attempts to extract or alter protected information. Physical security must therefore complement authentication, encryption, session management, tamper protection, and other technical controls rather than assume those controls will remain sufficient without protection of the underlying equipment. Physical security measures for commanding facilities and infrastructure must use layered controls selected according to the facility threat environment, system criticality, site characteristics, and consequence of unauthorized access. Controls may include perimeter barriers, controlled entry points, interior protected areas, identity and authorization verification, locks, intrusion detection, surveillance, and security personnel. Access to the facility must not, by itself, authorize physical access to commanding systems. Physical security controls must be commensurate with the sensitivity and criticality of the commanding functions they protect, with the most sensitive commanding capabilities requiring the most stringent physical access restrictions. | AC-14 CA-3(6) CA-8 CA-8(1) CA-8(3) PE-2 PE-2(1) PE-2(3) PE-3 PE-3(1) PE-3(2) PE-3(3) PE-3(5) PE-3(7) SA-3 SA-8 SC-12(6) SC-51 SC-8(5) SR-11(2) | A.7.2 A.7.1 A.7.2 A.7.3 A.7.4 A.8.12 A.7.4 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 | ||||
| CM0070 | Alternate Communications Paths | Establishing alternate communications paths for spacecraft and ground system operations reduces the likelihood that a single adversarial event, physical disruption, or technical failure will deny all mission communications. Reliance on a single communications pathway creates a single point of failure that adversaries can exploit through jamming, denial of service against ground infrastructure, physical disruption of a ground station, or compromise of network connectivity, any of which could result in complete loss of commanding and telemetry capability. Alternate paths must be assessed end to end for shared failure modes and operational dependencies. Differences in frequency, ground station, relay service, or network provider provide meaningful resilience only when the paths do not remain dependent on the same critical spacecraft, ground, management, or service infrastructure. The selection and configuration of alternate paths must be governed by the mission's concept of operations (CONOPS), which defines the conditions under which each path is used, the priority and switchover procedures between paths, and the minimum communications capability that must be maintained to satisfy mission safety and operational continuity requirements. | AC-17 CP-2 CP-4(2) CP-8(3) PL-8 PL-8(1) SC-47 | A.5.14 A.6.7 A.8.1 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.5.8 | ||||
| CM0032 | On-board Intrusion Detection & Prevention | An on-board intrusion detection and prevention system (IDS/IPS) monitors mission-critical spacecraft components and systems, generates and stores audit records, and supports mission-approved responses to detected threats. Depending on the mission architecture, threat, and availability of ground support, responses may be autonomous, ground-directed, or a combination of both. The system should address both known attack patterns and previously unseen anomalous behavior through complementary signature-based and behavior- or anomaly-based detection methods. Machine learning or adaptive technologies may be used when their performance, resource consumption, and failure behavior have been validated for the mission environment. Detection and response coverage should address applicable adversary activities across the attack lifecycle, including initial access, execution, persistence, defense evasion, and exfiltration. The on-board IDS/IPS must be integrated with the spacecraft's traditional fault management system to provide a unified approach to anomaly response, ensuring that cyber-triggered responses are compatible with fault management logic and do not produce unintended effects or fratricide against the spacecraft's own systems; countermeasures that are incompatible with fault management are considered unsafe and must not be executed autonomously. The response hierarchy must prioritize vehicle safety and continued mission operations. Advanced containment or deception responses may be considered when they can be executed without unacceptable mission risk. The system should preserve evidence that supports post-event analysis, threat characterization, and potential attribution by authorized ground support. | AU-14 AU-2 AU-3 AU-3(1) AU-4 AU-4(1) AU-5 AU-5(2) AU-5(5) AU-6(1) AU-6(4) AU-8 AU-9 AU-9(2) AU-9(3) CA-7(6) CM-11(3) CP-10 CP-10(4) IR-4 IR-4(11) IR-4(12) IR-4(14) IR-4(5) IR-5 IR-5(1) PL-8 PL-8(1) RA-10 RA-3(4) SA-8(21) SA-8(22) SA-8(23) SC-16(2) SC-32(1) SC-5 SC-5(3) SC-7(10) SC-7(9) SI-10(6) SI-16 SI-17 SI-3 SI-3(10) SI-3(8) SI-4 SI-4(1) SI-4(10) SI-4(11) SI-4(13) SI-4(16) SI-4(17) SI-4(2) SI-4(23) SI-4(24) SI-4(25) SI-4(4) SI-4(5) SI-4(7) SI-6 SI-7(17) SI-7(8) | A.8.15 A.8.15 A.8.6 A.8.17 A.5.33 A.8.15 A.8.15 A.5.29 A.5.25 A.5.26 A.5.27 A.5.8 A.5.7 A.8.12 A.8.7 A.8.16 A.8.16 A.8.16 A.8.16 | ||||
| CM0014 | Secure boot | Secure boot establishes and enforces a cryptographically verified chain of trust from a hardware-anchored root of trust (RoT) through each applicable stage of the startup sequence to the operating system or flight software image. Each stage in the chain must verify the integrity and authenticity of the next before transferring execution control. The boot policy must also prevent execution of unauthorized or revoked images, including unauthorized rollback to an older but validly signed software version. The trust anchor and initial verification function should be immutable after provisioning or protected by hardware-enforced mechanisms that prevent unauthorized modification and preserve their integrity. Components implementing the RoT must also be qualified for the expected mission radiation environment. Radiation tolerance addresses the reliability of the trust anchor, while immutability or protected update mechanisms address its resistance to unauthorized modification. This is particularly critical where radiation-induced bit flips and the physical inaccessibility of on-orbit hardware make a tamper-resistant, immutable hardware anchor essential to sustained boot integrity across the mission lifetime. | AC-14 PL-8 PL-8(1) SA-8(10) SA-8(12) SA-8(13) SA-8(3) SA-8(30) SA-8(4) SC-51 SI-7 SI-7(1) SI-7(10) SI-7(9) | A.5.8 | ||||