The adversary captures mission traffic in transit, on ground networks or over the space link, so that payload products, housekeeping, and command/ack exchanges can be reconstructed offline. Vantage points include tapped ground LANs/WANs between MOC and stations, baseband interfaces (IF/IQ), RF/optical receptions within the antenna field of view, and crosslink monitors. Depending on protection, the haul ranges from plaintext frames to encrypted bitstreams whose headers, rates, and schedules still yield valuable context (APIDs, VCIDs, pass timing, file manifest cues). Intercepted sessions can guide later replay, cloning, or targeted downlink requests.
| ID | Name | Tiering | Description | NIST Rev5 | ISO 27001 | Onboard SV | Ground | |
| CM0002 | COMSEC | Communications security (COMSEC) denies unauthorized parties access to information derived from telecommunications while ensuring the authenticity of those communications. COMSEC is commonly defined as a broad discipline that may encompass cryptographic security, transmission security, emissions security, cryptographic key management, traffic-flow security, and physical security of COMSEC material. Within SPARTA, these areas are further broken down through separate countermeasures, including CM0029 | TRANSEC, CM0030 | Crypto Key Management, CM0003 | TEMPEST/EMSEC, and CM0073 | Traffic Flow Analysis Defense. CM0002 provides the overarching communications-security context and supports the coordinated application of these specialized countermeasures. All mission links, particularly telemetry, tracking, and commanding (TT&C) links, should employ communications-security protections appropriate to the sensitivity, criticality, operational environment, and threat exposure of the information being exchanged. These protections may include cryptographic protection, transmission security, emissions security, traffic-flow protection, secure key management, and physical protection of COMSEC material, as addressed by the applicable specialized countermeasures. Spacecraft should not provide an operational mode that permits required cryptographic protection or command authentication on TT&C links to be bypassed or disabled. Operational, maintenance, test, recovery, and contingency modes should be considered when evaluating whether communications-security protections can be unintentionally or improperly circumvented. Communication receivers and associated signal-processing or TRANSEC mechanisms should detect and, when mission-defined criteria are met, reject or otherwise safely handle transmissions exhibiting anomalous signal characteristics consistent with communications deception. Cryptographic mechanisms should authenticate and integrity-check received content but should not be treated as RF-deception detectors. | AC-17 AC-17(1) AC-17(10) AC-17(2) AC-18 AC-18(1) AC-2(11) AC-3(10) CA-3 IA-4(9) IA-5 IA-5(7) IA-7 PL-8 PL-8(1) SA-8(18) SA-8(19) SA-9(6) SC-10 SC-12 SC-12(1) SC-12(2) SC-12(3) SC-12(6) SC-13 SC-16(3) SC-28(1) SC-28(3) SC-7 SC-7(10) SC-7(11) SC-7(18) SC-7(5) SC-8(1) SC-8(3) SI-10 SI-10(3) SI-10(5) SI-10(6) SI-19(4) SI-3(8) | A.5.14 A.6.7 A.8.1 A.8.16 A.5.14 A.8.1 A.8.20 A.5.14 A.8.21 A.5.16 A.5.17 A.5.8 A.5.14 A.8.16 A.8.20 A.8.22 A.8.23 A.8.26 A.8.12 A.5.33 A.8.20 A.8.24 A.8.24 A.8.26 A.5.31 A.5.33 A.8.11 | ||||
| CM0073 | Traffic Flow Analysis Defense | Traffic flow analysis attacks enable adversaries to derive operationally significant intelligence from observable transmission characteristics, including message timing, volume, duration, periodicity, and routing information, without decrypting the content of communications. Even when link encryption is in place, unprotected traffic patterns can reveal spacecraft operational schedules, command activity, contact windows with specific ground stations, and anomalous events that provide adversaries with actionable mission intelligence. Traffic flow analysis defense encompasses a set of techniques applied to protect the confidentiality of transmission metadata on telemetry, tracking, and commanding (TT&C) and data links, as well as onboard communications where applicable. Applicable techniques include padding transmissions to normalize message lengths and volumes, introducing artificial traffic during idle periods to obscure true contact patterns and event timing, obfuscating routing information and endpoint identities, varying transmission periodicity to defeat statistical pattern recognition, and frustrating traffic volume and duration analysis through active obfuscation methods. These controls are a complement to, but distinct from, cryptographic content protection, and should be applied based on a threat-informed assessment of the value of traffic metadata to potential adversaries and their collection capabilities. | SC-8 SI-4(15) | A.5.10 A.5.14 A.8.20 A.8.26 | ||||
| CM0036 | Session Termination | Where session-oriented communications are used between ground systems and spacecraft, between ground system components, or across internal spacecraft interfaces, the associated connection or session must be terminated upon completion or after a period of inactivity exceeding a threshold defined in the mission’s concept of operations (CONOPS). Failure to terminate idle or completed sessions leaves authenticated connections open and exploitable, providing adversaries with an opportunity to inject commands or data into an existing authenticated session without needing to complete the authentication process independently. Inactivity timeout thresholds must be established through the CONOPS process rather than set arbitrarily, balancing the security benefit of rapid session termination against the operational consequences of terminating a session that an operator or automated process may legitimately require across a contact gap or processing delay. Session termination must invalidate the associated session identifiers, authorization state, and cryptographic session state so that the terminated session cannot be reused. Where secure session resumption is operationally required, it must use a mission-approved, cryptographically protected mechanism with defined validity limits and must not permit reuse of expired, revoked, or invalidated session state. | AC-12 AC-12(2) SC-10 SI-14(3) SI-4(7) | A.8.20 | ||||
| CM0072 | Protocol Update / Refactoring | Communication and data exchange protocols governing spacecraft, ground system, and inter-system interfaces may contain specification-level vulnerabilities that cannot be resolved through implementation hardening alone, requiring updates to or refactoring of the protocol itself to eliminate the underlying weakness. Protocol vulnerabilities may arise from design flaws in the original specification, from advances in adversarial capability that render previously adequate security assumptions insufficient, or from emerging threats such as quantum computing that threaten the cryptographic primitives upon which protocol security depends. Protocol update or refactoring encompasses the deliberate modification of the rules, formats, and procedures governing system communications to address known vulnerabilities, improve security properties, or maintain adequate protection against the evolving threat environment over the mission's operational lifetime. Because space system protocols are often tightly coupled to hardware interfaces, flight software implementations, and ground system processing pipelines, protocol changes carry significant integration risk and must be managed through rigorous engineering change processes; this complexity makes proactive protocol security assessment and planned update capability more cost-effective than reactive refactoring under operational urgency. | CM-3 CP-11 SI-2 | 8.1 9.3.3 A.8.9 A.8.32 A.5.29 A.6.8 A.8.8 A.8.32 | ||||
| CM0029 | TRANSEC | Transmission security (TRANSEC) is the component of communications security (COMSEC) concerned with protecting the characteristics of the transmission itself, as distinct from protecting the content of the information being communicated. TRANSEC controls reduce the likelihood, effectiveness, or operational impact of transmission interception, signal disruption, communications deception, and exploitation of transmission characteristics within the defined threat model. Applicable TRANSEC techniques include jam-resistant waveforms that increase resistance to jamming and communications deception, spread spectrum and frequency hopping techniques that reduce signal predictability and improve resistance to interception and disruption, low probability of intercept and low probability of detection (LPI/LPD) signal designs that reduce transmission observability, and transmission scheduling or pattern discipline that limits the intelligence value of traffic analysis. TRANSEC requirements should be applied to mission communication links according to link criticality (e.g., TT&C, crosslinks), threat exposure, and operational consequence. TRANSEC must be treated as a distinct layer of protection complementary to, but not a substitute for, cryptographic protection of information content. | AC-17 AC-18 AC-18(5) CA-3 CP-8 PL-8 PL-8(1) SA-8(19) SC-16 SC-16(1) SC-40 SC-40(1) SC-40(3) SC-40(4) SC-5 SC-8(1) SC-8(3) SC-8(4) | A.5.14 A.6.7 A.8.1 A.5.14 A.8.1 A.8.20 A.5.14 A.8.21 A.5.29 A.7.11 A.5.8 A.5.33 | ||||