Threat actors may acquire or leverage valid credentials to maintain persistent access to a spacecraft or its supporting command and control (C2) systems. These credentials may include system service accounts, user accounts, maintenance access credentials, cryptographic keys, or other authentication mechanisms that enable continued entry without triggering access alarms. By operating with legitimate credentials, adversaries can sustain access over extended periods, evade detection, and facilitate follow-on tactics such as command execution, data exfiltration, or lateral movement. Credentialed persistence is particularly effective in environments lacking strong credential lifecycle management, segmentation, or monitoring allowing threat actors to exploit trusted pathways while remaining embedded in mission operations.
| ID | Name | Tiering | Description | NIST Rev5 | ISO 27001 | Onboard SV | Ground | |
| CM0001 | Protect Sensitive Information | Space mission sensitive information spans a broad attack surface and must be inventoried, classified, and protected at a level commensurate with its sensitivity across every location where it resides, including ground systems, contractor networks, and remote access environments. Sensitive material typically includes functional and performance specifications, interface control documents (ICDs), command and telemetry (C&T) databases, uplink protection schemes including disable and bypass features, fault management logic, scripts, simulation and rehearsal results, failure and anomaly resolution records, and architecture and software documentation. Each information type must be assigned a protection level, such as unclassified, controlled, proprietary, or classified, and access must be restricted to personnel with defined roles and a verified need to know. Sensitive data shall be protected at rest and in transit using encryption or other mission-approved safeguards commensurate with its classification, sensitivity, threat exposure, and operational constraints. DLP capabilities shall be applied to systems and data flows where they are technically feasible and effective, with alternative access controls, monitoring, or information-flow protections used where conventional DLP technology is not suitable. Ongoing configuration management must track, control, and document all changes to command procedures and critical database content to prevent unauthorized modification and mission degradation. | AC-25 AC-3(11) AC-4(23) AC-4(25) AC-4(6) CA-3 CM-12 CM-12(1) PL-8 PL-8(1) PM-11 PM-17 SA-3 SA-3(1) SA-3(2) SA-4(12) SA-5 SA-8 SA-8(19) SA-9(7) SC-16 SC-16(1) SC-8(1) SC-8(3) SI-12 SI-21 SI-23 SR-12 SR-7 | A.8.4 A.8.11 A.8.10 A.5.14 A.8.21 A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.33 7.5.1 7.5.2 7.5.3 A.5.37 A.8.27 A.8.28 A.5.33 A.8.10 A.5.22 | ||||
| CM0002 | COMSEC | Communications security (COMSEC) denies unauthorized parties access to information derived from telecommunications while ensuring the authenticity of those communications. COMSEC is commonly defined as a broad discipline that may encompass cryptographic security, transmission security, emissions security, cryptographic key management, traffic-flow security, and physical security of COMSEC material. Within SPARTA, these areas are further broken down through separate countermeasures, including CM0029 | TRANSEC, CM0030 | Crypto Key Management, CM0003 | TEMPEST/EMSEC, and CM0073 | Traffic Flow Analysis Defense. CM0002 provides the overarching communications-security context and supports the coordinated application of these specialized countermeasures. All mission links, particularly telemetry, tracking, and commanding (TT&C) links, should employ communications-security protections appropriate to the sensitivity, criticality, operational environment, and threat exposure of the information being exchanged. These protections may include cryptographic protection, transmission security, emissions security, traffic-flow protection, secure key management, and physical protection of COMSEC material, as addressed by the applicable specialized countermeasures. Spacecraft should not provide an operational mode that permits required cryptographic protection or command authentication on TT&C links to be bypassed or disabled. Operational, maintenance, test, recovery, and contingency modes should be considered when evaluating whether communications-security protections can be unintentionally or improperly circumvented. Communication receivers and associated signal-processing or TRANSEC mechanisms should detect and, when mission-defined criteria are met, reject or otherwise safely handle transmissions exhibiting anomalous signal characteristics consistent with communications deception. Cryptographic mechanisms should authenticate and integrity-check received content but should not be treated as RF-deception detectors. | AC-17 AC-17(1) AC-17(10) AC-17(2) AC-18 AC-18(1) AC-2(11) AC-3(10) CA-3 IA-4(9) IA-5 IA-5(7) IA-7 PL-8 PL-8(1) SA-8(18) SA-8(19) SA-9(6) SC-10 SC-12 SC-12(1) SC-12(2) SC-12(3) SC-12(6) SC-13 SC-16(3) SC-28(1) SC-28(3) SC-7 SC-7(10) SC-7(11) SC-7(18) SC-7(5) SC-8(1) SC-8(3) SI-10 SI-10(3) SI-10(5) SI-10(6) SI-19(4) SI-3(8) | A.5.14 A.6.7 A.8.1 A.8.16 A.5.14 A.8.1 A.8.20 A.5.14 A.8.21 A.5.16 A.5.17 A.5.8 A.5.14 A.8.16 A.8.20 A.8.22 A.8.23 A.8.26 A.8.12 A.5.33 A.8.20 A.8.24 A.8.24 A.8.26 A.5.31 A.5.33 A.8.11 | ||||
| CM0030 | Crypto Key Management | Effective cryptographic key management is a foundational requirement for all mission encryption and authentication functions; the security of cryptographic implementations is only as strong as the protection afforded to the keys those implementations rely upon. Key management must conform to recognized cryptographic guidance and address the full lifecycle applicable to each key type, including generation or establishment, distribution, storage, activation, use, replacement, deactivation or revocation, recovery where authorized, compromise response, and destruction. Only approved cryptographic algorithms, key generation methods, key distribution techniques, and authentication mechanisms may be used; the use of unapproved, deprecated, or custom cryptographic primitives is prohibited regardless of perceived functional adequacy. Encryption key handling must be performed outside of onboard software and protected through dedicated cryptographic mechanisms, preventing keys from being exposed through software vulnerabilities, memory inspection, or software-level debugging interfaces. Secret and private key material must not be retrievable in plaintext through telecommands, telemetry, diagnostic outputs, debugging interfaces, or other externally accessible mechanisms, regardless of the privilege level of the requesting entity. | CM-3(6) PL-8 PL-8(1) SA-3 SA-4(5) SA-8 SA-9(6) SC-12 SC-12(1) SC-12(2) SC-12(3) SC-12(6) SC-28(3) SC-8(1) | A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.5.33 A.8.24 | ||||
| CM0005 | Ground-based Countermeasures | Ground-based countermeasures protect the terrestrial capabilities that develop, launch, command, monitor, operate, secure, and sustain space missions. These capabilities may be distributed across mission-owned systems, contractor environments, external partners, and commercial service providers. Because ground segment architectures and responsibilities vary, cybersecurity protections should be selected through threat-informed analysis of the mission functions being performed rather than through indiscriminate application of a single control set. The SPARTA Ground Segment Cyber Defenses guidance provides an interactive functional decomposition that maps ground segment function groups to applicable Defense-in-Depth sub-layers and countermeasure targets. The supporting report, VTR-2026-00702 Rev A, Ground Segment Cyber Defenses and Risk-Based Tiering, provides the methodology, definitions, and risk-tier rationale. The accompanying Ground Segment Cyber Defenses Excel Workbook consolidates the function mappings and Baseline and Enhanced countermeasure guidance into a resource that can be tailored to a specific mission architecture. | SPARTA Ground Segment Cyber Defenses guidance | None | ||||
| CM0035 | Protect Authenticators | Authenticators and associated authenticator material, including passwords, secret and private keys, tokens, biometric templates, shared secrets, certificates, and trust-store entries, must be protected against unauthorized modification and, where the material is confidential, unauthorized disclosure throughout their lifecycle. Disclosure of secret authenticator material may enable adversaries to impersonate legitimate users or systems. Unauthorized modification of authenticators, certificates, or trust information can deny access to legitimate entities, substitute adversary-controlled credentials, or corrupt the trust basis of mission authentication mechanisms. Protection must apply to authenticators at rest, in transit, and in use, and must extend to all forms and storage locations, including credential databases, configuration files, embedded device credentials, hardware security tokens, and cryptographic key stores. Authenticator protection is a prerequisite for the effectiveness of any authentication-based access control; an authentication system whose authenticators are unprotected provides no meaningful security regardless of the strength of the underlying authentication protocol. | AC-17(6) AC-3(11) CM-3(6) IA-4(9) IA-5 IA-5(6) PL-8 PL-8(1) SA-3 SA-4(5) SA-8 SA-8(13) SA-8(19) SC-16 SC-16(1) SC-8(1) | A.8.4 A.5.16 A.5.17 A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.5.33 | ||||
| CM0029 | TRANSEC | Transmission security (TRANSEC) is the component of communications security (COMSEC) concerned with protecting the characteristics of the transmission itself, as distinct from protecting the content of the information being communicated. TRANSEC controls reduce the likelihood, effectiveness, or operational impact of transmission interception, signal disruption, communications deception, and exploitation of transmission characteristics within the defined threat model. Applicable TRANSEC techniques include jam-resistant waveforms that increase resistance to jamming and communications deception, spread spectrum and frequency hopping techniques that reduce signal predictability and improve resistance to interception and disruption, low probability of intercept and low probability of detection (LPI/LPD) signal designs that reduce transmission observability, and transmission scheduling or pattern discipline that limits the intelligence value of traffic analysis. TRANSEC requirements should be applied to mission communication links according to link criticality (e.g., TT&C, crosslinks), threat exposure, and operational consequence. TRANSEC must be treated as a distinct layer of protection complementary to, but not a substitute for, cryptographic protection of information content. | AC-17 AC-18 AC-18(5) CA-3 CP-8 PL-8 PL-8(1) SA-8(19) SC-16 SC-16(1) SC-40 SC-40(1) SC-40(3) SC-40(4) SC-5 SC-8(1) SC-8(3) SC-8(4) | A.5.14 A.6.7 A.8.1 A.5.14 A.8.1 A.8.20 A.5.14 A.8.21 A.5.29 A.7.11 A.5.8 A.5.33 | ||||