Broadcast isolation restricts the number of computers a host can contact on their LAN.
https://d3fend.mitre.org/technique/d3f:BroadcastDomainIsolation/
| ID | Name | Description | NIST Rev5 | D3FEND | ISO 27001 | |
| CM0038 | Segmentation | Segmentation establishes physical or logical isolation boundaries between spacecraft system components and functional domains to limit the propagation of compromise, contain the consequences of a security failure, and enforce controlled information flow across the mission architecture. Mission-critical functions must be isolated from non-mission-critical functions through enforced partition boundaries that control access to and protect the integrity of the hardware, software, and firmware implementing those functions. Information flow between partitioned components or applications must be explicitly authorized by security policy; any flow not affirmatively permitted is denied by default. Boundary protections must be implemented to separate spacecraft bus, communications, and payload components, preventing a compromise in one domain from directly affecting the others. Information crossing the spacecraft boundary shall receive confidentiality protection where required by its classification, sensitivity, or mission risk. Command-bearing and other security-critical exchanges shall receive the mission-required authentication, integrity, authorization, and anti-replay protections regardless of whether confidentiality is required. These controls collectively implement a defense-in-depth architecture in which an adversary who gains a foothold in one partition faces enforced barriers before reaching mission-critical assets. | AC-4 AC-4(14) AC-4(2) AC-4(24) AC-4(26) AC-4(31) AC-4(32) AC-4(6) AC-6 CA-3 CA-3(7) PL-8 PL-8(1) SA-3 SA-8 SA-8(13) SA-8(15) SA-8(18) SA-8(3) SA-8(4) SA-8(9) SC-16(3) SC-2(2) SC-3 SC-3(4) SC-32 SC-32(1) SC-39 SC-4 SC-49 SC-50 SC-6 SC-7(20) SC-7(21) SC-7(29) SC-7(5) SI-17 SI-4(7) | D3-NI D3-BDI D3-NTF D3-ITF D3-OTF D3-EI D3-HBPI D3-KBPI D3-MAC D3-RRID D3-EAL D3-EDL D3-IOPR D3-SCF | A.5.14 A.8.22 A.8.23 A.5.15 A.8.2 A.8.18 A.5.14 A.8.21 A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 | |
| ID | Name | Description | |
|---|---|---|---|
| IA-0005 | Rendezvous & Proximity Operations | Adversaries may execute a sequence of orbital maneuvers to co-orbit and approach a target closely enough for local sensing, signaling, or physical interaction. Proximity yields advantages that are difficult to achieve from Earth: high signal-to-noise for interception, narrowly targeted interference or spoofing, observation of attitude/thermal behavior, and, if interfaces exist, opportunities for mechanical mating. The approach typically unfolds through phasing, far-field rendezvous, relative navigation (e.g., vision, lidar, crosslink cues), and closed-loop final approach. At close distances, an attacker can monitor side channels, stimulate acquisition beacons, test crosslinks, or prepare for contact operations such as capture or docking. Contact itself is not the endpoint: mating and grappling expose data and power umbilicals, standardized payload ports, service and checkout connectors, and device programming interfaces that are unreachable by any other means. | |
| IA-0005.02 | Docked Vehicle / OSAM | Docking, berthing, or service capture during on-orbit servicing, assembly, and manufacturing (OSAM) creates a high-trust bridge between vehicles. Threat actors exploit this moment, either by pre-positioning code on a servicing vehicle or by manipulating ground updates to it, so that, once docked, lateral movement occurs across the mechanical/electrical interface. Interfaces may expose power and data umbilicals, standardized payload ports, or gateways into the target’s C&DH or payload networks (e.g., SpaceWire, Ethernet, 1553). Service tools that push firmware, load tables, transfer files, or share time/ephemeris become conduits for staged procedures or implants that execute under maintenance authority. Malware can be timed to activation triggers such as “link up,” “maintenance mode entered,” or specific device enumerations that only appear when docked. Because OSAM operations are scheduled and well-documented, the adversary can align preparation with published timelines, ensuring that the first point of execution coincides with the brief window when cross-vehicle trust is intentionally elevated. | |
| IA-0005.03 | Proximity Grappling | In this variant, the attacker employs a capture mechanism (robotic arm, grappling fixture, magnetic or mechanical coupler) to establish physical contact without full docking. Once grappled, covers can be manipulated, temporary umbilicals attached, or exposed test points engaged; if design provisions exist (service ports, checkout connectors, external debug pads), these become direct pathways to device programming interfaces (e.g., JTAG/SWD/UART), mass-storage access, or maintenance command sets. Grappling also enables precise attitude control relative to the target, allowing contact-based sensors to read buses inductively or capacitively, or to inject signals onto harness segments reachable from the exterior. Initial access arises when a maintenance or debug path, normally latent in flight, is electrically or logically completed by the grappled connection, allowing authentication-bypassing actions such as boot-mode strapping, image replacement, or scripted command ingress. The operation demands accurate geometry, approach constraints, and fixture knowledge, but yields a transient, high-privilege bridge tailored for short, decisive actions that leave minimal on-orbit RF signature. | |
| IA-0006 | Compromise Hosted Payload | Adversaries target hosted payloads as an alternate doorway into the host spacecraft. Hosted payloads often expose their own command sets, file services, and telemetry paths, sometimes via the host’s TT&C chain, sometimes through a parallel ground infrastructure under different operational control. Initial access arises when an attacker obtains the ability to issue payload commands, upload files, or alter memory/register state on the hosted unit. Because data and control must traverse an interface to the host bus (power, time, housekeeping, data routing, gateway processors), the payload–host boundary can also carry management functions: mode transitions, table loads, firmware updates, and cross-strapped links that appear only in maintenance or contingency modes. With knowledge of the interface specification and command dictionaries, a threat actor can activate rarely used modes, inject crafted data products, or trigger gateway behaviors that extend influence beyond the payload itself. In multi-tenant or commercial hosting arrangements, differences in keying, procedures, or scheduling between the payload operator and the bus operator provide additional opportunity for a first foothold that looks like routine payload commanding. | |
| IA-0009 | Trusted Relationship | Adversaries obtain first execution by riding connections that the mission already trusts, formal interconnections with partners, vendors, and user communities. Once a third party is compromised, the actor inherits that entity’s approved routes into mission enclaves: VPNs and jump hosts into ground networks, API keys into cloud tenants, automated file drops that feed command or update pipelines, and collaboration spaces where procedures and dictionaries circulate. Because traffic, credentials, and artifacts originate from known counterparts, the initial execution event can appear as a routine payload task, scheduled procedure, or software update promoted through established processes. | |
| IA-0009.01 | Mission Collaborator (academia, international, etc.) | Missions frequently depend on distributed teams, instrument builders at universities, science operations centers, and international partners, connected by data portals, shared repositories, and federated credentials. A compromise of a collaborator yields access to telescience networks, analysis pipelines, instrument commanding tools, and file exchanges that deliver ephemerides, calibration products, procedures, or configuration tables into mission workflows. Partners may operate their own ground elements or payload gateways under delegated authority, creating additional entry points whose authentication and logging differ from the prime’s. Initial access emerges when attacker-modified artifacts or commands traverse these sanctioned paths: a revised calibration script uploaded through a science portal, a configuration table promoted by a cross-org CI job, or a payload task submitted via a collaboration queue and forwarded by the prime as routine work. Variations in process rigor, identity proofing, and toolchains across institutions amplify the attacker’s options while preserving the appearance of legitimate partner activity. | |
| IA-0009.02 | Vendor | Vendors that design, integrate, or support mission systems often hold elevated, persistent routes into operations: remote administration of ground software and modems, access to identity providers and license servers, control of cloud-hosted services, and authority to deliver firmware, bitstreams, or patches. Attackers who compromise a vendor’s enterprise or build environment can assume these roles, issuing commands through approved consoles, queuing updates in provider-operated portals, or invoking maintenance procedures that the mission expects the vendor to perform. Some vendor pathways terminate directly on RF equipment or key-management infrastructure; others ride cross-account cloud roles or managed SaaS backends that handle mission data and scheduling. | |
| IA-0009.03 | User Segment | The “user segment” encompasses end users and their equipment that interact with mission services, SATCOM terminals, customer ground gateways, tasking portals, and downstream processing pipelines for delivered data. Where these environments interconnect with mission cores, a compromised user domain becomes a springboard. Attackers can inject malformed tasking requests that propagate into payload scheduling, craft user-plane messages that traverse gateways into control or management planes, or seed data products that flow back to mission processing systems and automation. In broadband constellations and hosted services, user terminals may share infrastructure with TT&C or provider management networks, creating opportunities to pivot from customer equipment into provider-run nodes that the spacecraft trusts. | |
| IA-0011 | Auxiliary Device Compromise | Adversaries abuse peripherals and removable media that the spacecraft (or its support equipment) ingests during development, I&T, or on-orbit operations. Small satellites and hosted payloads frequently expose standard interfaces, USB, UART, Ethernet, SpaceWire, CAN, or mount removable storage for loading ephemerides, tables, configuration bundles, or firmware. A tainted device can masquerade as a trusted class (mass-storage, CDC/HID) or present crafted files that trigger auto-ingest workflows, file watchers, or maintenance utilities. Malware may be staged by modifying the peripheral’s firmware, seeding the images written by lab formatting tools, or swapping media during handling. Once connected, the device can deliver binaries, scripts, or malformed data products that execute under existing procedures. Because these interactions often occur during hurried timelines (checkouts, rehearsals, contingency maintenance), the initial execution blends with legitimate peripheral use while traversing a path already privileged to reach flight software or controllers. | |
| IA-0013 | Compromise Host Spacecraft | The inverse of "IA-0006: Compromise Hosted Payload", this technique describes adversaries that are targeting a hosted payload, the host space vehicle (SV) can serve as an initial access vector to compromise the payload through vulnerabilities in the SV's onboard systems, communication interfaces, or software. If the SV's command and control systems are exploited, an attacker could gain unauthorized access to the vehicle's internal network. Once inside, the attacker may laterally move to the hosted payload, particularly if it shares data buses, processors, or communication links with the vehicle. | |
| EX-0001 | Replay | Replay is the re-transmission of previously captured traffic, over RF links, crosslinks, or internal buses, to elicit the same processing and effects a second time. Adversaries first observe and record authentic exchanges (telecommands, ranging/acquisition frames, housekeeping telemetry acknowledgments, bus messages), then resend them within acceptance conditions that the system recognizes, matching link geometry, timetags, counters, or mode states. The aim can be functional (re-triggering an action such as a mode change), observational (fingerprinting how the vehicle reacts at different states), or disruptive (saturating queues and bandwidth to crowd out legitimate traffic). Because replays preserve valid syntax and often valid context, they can blend with normal operations, especially during periods with reduced monitoring or when counters and windows reset (e.g., handovers, safing entries). On encrypted links, metadata replays (acquisition beacons, schedule requests) may still yield informative responses. | |
| EX-0001.02 | Bus Traffic Replay | Instead of the RF path, the attacker targets internal command/data handling by injecting or retransmitting messages on the spacecraft bus (e.g., 1553, SpaceWire, custom). Because many subsystems act on the latest message or on message rate rather than on uniqueness, a flood of historical yet well-formed frames can consume bandwidth, starve critical publishers, or cause subsystems to perform the same action repeatedly. Secondary effects include stale sensor values being re-consumed, watchdog timers being reset at incorrect intervals, and autonomy rules misclassifying the situation due to out-of-order but valid-looking events. On time-triggered or scheduled buses, replaying at precise offsets can collide with or supersede legitimate messages, steering system state without changing software. The goal is to harness the bus’s determinism, repeating prior internal stimuli to recreate prior effects or to induce resource exhaustion. | |
| EX-0012 | Modify On-Board Values | The attacker alters live or persistent data that the spacecraft uses to make decisions and route work. Targets include device and control registers, parameter and limit tables, internal routing/subscriber maps, schedules and timelines, priority/QoS settings, watchdog and timer values, autonomy/FDIR rule tables, ephemeris and attitude references, and power/thermal setpoints. Many missions expose legitimate mechanisms for updating these artifacts, direct memory read/write commands, table load services, file transfers, or maintenance procedures, which can be invoked to steer behavior without changing code. Edits may be transient (until reset) or latched/persistent across boots; they can be narrowly scoped (a single bit flip on an enable mask) or systemic (rewriting a routing table so commands are misdelivered). The effect space spans subtle biasing of control loops, selective blackholing of commands or telemetry, rescheduling of operations, and wholesale changes to mode logic, all accomplished by modifying the values the software already trusts and consumes. | |
| EX-0012.01 | Registers | Threat actors may target the internal registers of the victim spacecraft in order to modify specific values as the FSW is functioning or prevent certain subsystems from working. Most aspects of the spacecraft rely on internal registers to store important data and temporary values. By modifying these registers at certain points in time, threat actors can disrupt the workflow of the subsystems or onboard payload, causing them to malfunction or behave in an undesired manner. | |
| EX-0012.02 | Internal Routing Tables | Threat actors may rewrite the maps that tell software where to send and receive things. In publish/subscribe or message-queued flight frameworks, tables map message IDs to subscribers, opcodes to handlers, and pipes to processes; at interfaces, address/port maps define how traffic traverses bridges and gateways (e.g., SpaceWire node/port routes, 1553 RT/subaddress mappings, CAN IDs). By altering these structures, commands can be misdelivered, dropped, duplicated, or routed through unintended paths; telemetry can be redirected or blackholed; and handler bindings can be swapped so an opcode triggers the wrong function. Schedule/routing hybrids, used to sequence activities and distribute results, can be edited to reorder execution or to create feedback loops that occupy bandwidth and processor time. The result is control over who hears what and when, achieved by changing the lookup tables that underpin command/telemetry distribution rather than the code that processes them. | |
| EX-0012.03 | Memory Write/Loads | The adversary uses legitimate direct-memory commands or load services to place chosen bytes at chosen addresses. Many spacecraft support raw read/write operations, block loads into RAM or non-volatile stores, and table/file loaders that copy content into working memory. With knowledge of address maps and data structures, an attacker can patch function pointers or vtables, alter limit and configuration records, seed scripts or procedures into interpreter buffers, adjust DMA descriptors, or overwrite portions of executable images resident in RAM. Loads may be sized and paced to fit link and queue constraints, then activated by a subsequent command, mode change, or natural reference by the software. | |
| EX-0012.04 | App/Subscriber Tables | In publish/subscribe flight frameworks, applications and subsystems register interest in specific message classes via subscriber (or application) tables. These tables map message IDs/topics to subscribers, define delivery pipes/queues, and often include filters, priorities, and rate limits. By altering these mappings, an adversary can quietly reshape information flow: critical consumers stop receiving health or sensor messages; non-critical tasks get flooded; handlers are rebound so an opcode or message ID reaches the wrong task; or duplicates create feedback loops that consume bandwidth and CPU. Because subscription state is usually read at init or refreshed on command, subtle edits can persist across reboots or take effect at predictable times. Similar effects appear in legacy MIL-STD-1553 deployments by modifying Remote Terminal (RT), subaddress, or mode-code configurations so that messages are misaddressed or dropped at the bus interface. The net result is control-by-misdirection: the software still “works,” but the right data no longer reaches the right recipient at the right time. | |
| EX-0012.05 | Scheduling Algorithm | Spacecraft typically rely on real-time scheduling, fixed-priority or deadline/periodic schemes, driven by timers, tick sources, and per-task parameters. Threat actors target these parameters and associated tables to skew execution order and timing. Edits may change priorities, periods, or deadlines; adjust CPU budgets and watchdog thresholds; alter ready-queue disciplines; or reconfigure timer tick rates and clock sources. They may also modify task affinities, message-queue depths, and interrupt masks so preemption and latency characteristics shift. Small changes can have large effects: high-rate control loops see added jitter, estimator updates miss deadlines, command/telemetry handling starves, or low-priority maintenance tasks monopolize cores due to mis-set periods. Manipulated schedules can create intermittent, state-dependent malfunctions that are hard to distinguish from environmental load. The essence of the technique is to weaponize time, reshaping when work happens so that otherwise correct code produces unsafe or exploitable behavior. | |
| EX-0012.06 | Science/Payload Data | Payload data, and the metadata that gives it meaning, can be altered in place to steal value, mislead users, or degrade mission outputs. Targets include raw detector frames, packetized Level-0 streams, onboard preprocessed products, and file catalogs/directories on mass memory. Adjacent metadata such as timestamps, pointing/attitude tags, calibration coefficients, compression settings, and quality flags are equally potent; slight bias in a calibration table or time tag can skew entire downlink campaigns while appearing routine. An adversary may rewrite frame headers, reorder packets, substitute segments from prior passes, or flip quality bits so ground pipelines silently discard or misclassify products. Recorder index manipulation can orphan files or cause downlinks to serve stale or fabricated content. Because many missions perform some processing or filtering onboard, tampering upstream of downlink propagates forward as “authoritative” truth, jeopardizing mission objectives without obvious protocol anomalies. | |
| EX-0012.07 | Propulsion Subsystem | Propulsion relies on parameters and sensed values that govern burns, pressure management, and safing. Editable items include thruster calibration and minimum impulse bit, valve timing and duty limits, inhibit masks, delta-V tables, plume keep-out constraints, tank pressure/temperature thresholds, leak-detection limits, and momentum-management coupling with attitude control. By modifying these, an adversary can provoke over-correction, waste propellant through repeated trims, bias orbit maintenance, or trigger protective sequences at inopportune times. False pressure or temperature readings can cause autonomous venting or lockouts; tweaked alignment matrices or misapplied gimbal limits can yield off-axis thrust and attitude excursions; altered desaturation rules can induce frequent wheel unloads that sap resources. Because consumables are finite and margins tight, even modest parameter drift can shorten mission life or violate keep-out and conjunction constraints while presenting as “normal” control activity. | |
| EX-0012.08 | Attitude Determination & Control Subsystem | ADCS depends on tightly coupled models and parameters: star-tracker catalogs and masks, sensor alignments and bias terms, gyro scale factors and drift rates, estimator covariances and process/measurement noise, controller gains and saturation limits, wheel/CMG torque constants, magnetic torquer maps, and sun sensor thresholds. Editing these values skews estimation or control, producing slow bias, limit cycles, loss of lock, or abrupt safing triggers. For example, a small change to a star-tracker mask can force frequent dropouts; an inflated gyro bias drives the filter away from truth; softened actuator limits or mis-set gains let disturbances accumulate; altered sun-point entry criteria cause unnecessary mode switches. Secondary impacts propagate to power, thermal, and communications because pointing and geometry underpin array generation, radiator view factors, and antenna gain. The technique turns the spacecraft against itself by nudging the parameters that close the loop between what the vehicle believes and how it responds. | |
| EX-0012.09 | Electrical Power Subsystem | Adversaries alter parameters and sensed values that govern power generation, storage, and distribution so the spacecraft draws or allocates energy in harmful ways. Editable items include bus voltage/current limits, MPPT setpoints and sweep behavior, array and SADA modes, battery charge/discharge thresholds and temperature derates, state-of-charge estimation constants, latching current limiter (LCL) trip/retry settings, load-shed priorities, heater duty limits, and survival/keep-alive rules. By changing these, a threat actor can drive excess consumption (e.g., disabling load shed, raising heater floors), misreport remaining energy (skewed SoC), or push batteries outside healthy ranges, producing brownouts, repeated safing, or premature capacity loss. Manipulating thresholds and hysteresis can also create oscillations where loads repeatedly drop and re-engage, wasting energy and stressing components. The effect is accelerated depletion or misallocation of finite power, degrading mission operations and potentially preventing recovery after eclipse or anomalies. | |
| EX-0012.10 | Command & Data Handling Subsystem | C&DH relies on tables and runtime values that define how commands are parsed, queued, and dispatched and how telemetry is collected, stored, and forwarded. Targets include opcode-to-handler maps, argument limits and schemas, queue depths and priorities, message ID routing, publish/subscribe bindings, timeline/schedule entries, file catalog indices, compression and packetization settings, and event/telemetry filters. Edits to these artifacts reshape control and visibility: commands are delayed, dropped, or misrouted; telemetry is suppressed or redirected; timelines slip; and housekeeping/data products are repackaged in ways that confuse ground processing. Because many frameworks treat these values as authoritative configuration, small changes can silently propagate across subsystems, degrading responsiveness, creating backlogs, or severing the logical pathways that keep the vehicle coordinated, without modifying the underlying code. | |
| EX-0012.11 | Watchdog Timer (WDT) | Watchdogs supervise liveness by requiring software to “pet” within defined windows or the system resets. Threat actors manipulate WDT behavior by changing timeout durations, windowed-WDT bounds, reset actions, enable/mask bits, or the source that performs the petting (e.g., moving it into a low-level ISR so higher layers can be stalled indefinitely). Software WDTs can be disabled or starved; hardware WDTs are influenced via control registers, strap pins, or supervisor commands that alter prescalers and reset ladders. Outcomes include preventing intended resets so runaway tasks consume power and bandwidth, or forcing repeated resets at tactically chosen moments, e.g., during updates or handovers, to keep the system in a degraded or easily predictable state. The technique converts a safety mechanism into a tool for either unbounded execution or rhythmic disruption, depending on how the WDT parameters are rewritten. | |
| EX-0012.12 | System Clock | Spacecraft maintain multiple time bases and distribute time to schedule sequences, validate timetags, manage anti-replay counters, and align navigation/attitude processing. By writing to clock registers, altering time-distribution services, switching disciplining sources, or biasing oscillator parameters, an adversary can skew these references. Effects include reordering or prematurely firing stored command sequences, invalidating timetag checks, desynchronizing counters used by authentication or ranging, misaligning estimator windows, and corrupting timestamped payload data. Even small offsets can accumulate into observable misbehavior when autonomy and scheduling depend on tight temporal guarantees. The result is execution that happens at the wrong moment, or not at all, because the system’s notion of “now” has been shifted. | |
| EX-0012.13 | Poison AI/ML Training Data | When missions employ AI/ML, for onboard detection/classification, compression, anomaly screening, guidance aids, or ground-side planning, training data becomes a control surface. Data poisoning inserts crafted examples or labels into the training corpus or fine-tuning set so the resulting model behaves incorrectly while appearing valid. Variants include clean-label backdoors (benign-looking samples with a hidden trigger that later induces a targeted response), label flipping and biased sampling (to skew decision boundaries), and corruption of calibration/ground-truth products that the pipeline trusts. For space systems, poisoning may occur in science archives, test vectors, simulated scenes, or housekeeping datasets used to train autonomy/anomaly models; models trained on poisoned corpora are then packaged and uplinked as routine updates. Once fielded, a simple trigger pattern in imagery, telemetry, or RF features can cause misclassification, suppression, or false positives at the time and place the adversary chooses, turning model behavior into an execution mechanism keyed by data rather than code. | |
| LM-0001 | Hosted Payload | The adversary pivots through the host–payload boundary to reach additional subsystems. Hosted payloads exchange power, time, housekeeping, and data with the bus via defined gateways (e.g., SpaceWire, 1553, Ethernet) and often support file services, table loads, and command dictionaries distinct from the host’s. A foothold on the payload can be used to inject traffic through the gateway processor, request privileged services (time/ephemeris distribution, firmware loads), or ride shared backplanes where payload traffic is bridged into C&DH networks. In some designs, payload processes execute on host compute or expose maintenance modes that temporarily widen access, creating paths from the payload into attitude, power, storage, or recorder resources. The movement is transitive: compromise a co-resident unit, then traverse the trusted interface that already exists for mission operations. | |
| LM-0002 | Exploit Lack of Bus Segregation | On flat architectures, where remote terminals, subsystems, and payloads share a common bus with minimal partitioning, any node that can transmit may influence many others. An attacker leverages this by forging message IDs or terminal addresses, replaying actuator/sensor frames, seizing or imitating bus-controller roles, or abusing gateway bridges that forward traffic between links (e.g., 1553↔SpaceWire/CAN). Because consumers often act on the latest valid-looking message, crafted traffic from one compromised device can reconfigure peers, toggle power domains, or write persistent parameters. Weak role enforcement and broadcast semantics allow privilege escalation from a peripheral to effective system-wide influence, turning the shared medium into a highway for further compromise. | |
| LM-0004 | Visiting Vehicle Interface(s) | Docking, berthing, or short-duration attach events create high-trust, high-bandwidth connections between vehicles. During these operations, automatic sequences verify latches, exchange status, synchronize time, and enable umbilicals that carry data and power; maintenance tools may also push firmware or tables across the interface. An attacker positioned on the visiting vehicle can exploit these handshakes and service channels to inject commands, transfer files, or access bus gateways on the host. Because many actions are expected “just after dock,” malicious traffic can ride the same procedures that commission the interface, allowing lateral movement from the visiting craft into the target spacecraft’s C&DH, payload, or support subsystems. | |
| LM-0005 | Virtualization Escape | The adversary pivots across partitions by abusing the mechanisms a separation kernel or hypervisor exposes for inter-partition communication and device sharing. Paths include message ports/queues, shared-memory windows, virtual NICs and bridges, hypercalls, and common driver backends (e.g., storage or DMA engines without strict IOMMU bounds). A foothold in a less-trusted partition, often a payload or guest OS, can be turned into access to a higher-privilege domain by crafting traffic that exploits parser flaws in port services, racing management channels, or coercing backend drivers to perform out-of-bounds operations. Once the boundary is crossed, the actor can reach bus gateways, file systems, or control applications hosted in adjacent partitions and continue movement under the guise of permitted inter-partition exchanges. | |
| LM-0006 | Launch Vehicle Interface | During integration and ascent, payloads and the launch vehicle exchange power, discrete lines, and data via umbilicals, separation avionics, and shared EGSE networks. Protections can be reduced or heterogeneous because timelines are tight and responsibilities cross organizations. An attacker positioned on either side (vehicle or payload) can use these commissioning links, health/status queries, time distribution, inhibit lines, separation commands, or telemetry gateways, to inject messages, transfer files, or alter configuration that propagates across the interface. Before fairing close and prior to separation, this brief but high-trust coupling provides a route to move from one platform to the other and to seed artifacts that persist after deployment. | |
| LM-0006.01 | Rideshare Payload | In shared launches, multiple independent payloads cohabit common infrastructure until separation. If isolation is incomplete (e.g., shared data buses, mispartitioned deployer controllers, common logging/telemetry collectors, or cross-connected laptops and recorders), a compromise in one payload’s domain can be leveraged to observe or influence another’s traffic before release. Threat actors exploit these transient but real connections to read configuration, pivot through deployer control paths, or stage data/commands that execute as neighboring payloads power and check out, enabling cross-payload access or tampering prior to independent flight. | |
| EXF-0009 | Compromised Partner Site | The adversary leverages third-party infrastructure connected to the mission, commercial ground stations, relay networks, operations service providers, data processing partners, to capture or relay mission data outside official channels. From these footholds, the attacker can mirror TT&C and payload feeds, scrape shared repositories, and man-in-the-middle cross-organization links (e.g., between partner stations and the primary MOC). Because partner environments vary in segmentation and monitoring, exfiltration can affect multiple missions or operators simultaneously, with stolen data exiting through the partner’s routine distribution mechanisms. | |
| EXF-0010 | Payload Communication Channel | Many payloads maintain communications separate from the primary TT&C, direct downlinks to user terminals, customer networks, or experimenter VPNs. An adversary who implants code in the payload (or controls its gateway) can route host-bus data into these channels, embed content within payload products (e.g., steganographic fields in imagery/telemetry), or schedule covert file transfers alongside legitimate deliveries. Because these paths are expected to carry high-rate mission data and may bypass TT&C monitoring, they provide a discreet conduit to exfiltrate payload or broader spacecraft information without altering the primary command link’s profile. | |
| ID | Description | |
| SV-AC-3 |
Compromised master keys or any encryption key |
|
| SV-CF-2 |
Eavesdropping (RF and proximity) |
|
| SV-IT-2 |
Unauthorized modification or corruption of data |
|
| SV-MA-2 |
Heaters and flow valves of the propulsion subsystem are controlled by electric signals so cyberattacks against these signals could cause propellant lines to freeze, lock valves, waste propellant or even put in de-orbit or unstable spinning |
|
| SV-AV-4 |
Attacking the scheduling table to affect tasking |
|
| SV-IT-5 |
Onboard control procedures (i.e., ATS/RTS) that execute a scripts/sets of commands |
|
| SV-MA-3 |
Attacks on critical software subsystems Attitude Determination and Control (AD&C) subsystem determines and controls the orientation of the satellite. Any cyberattack that could disrupt some portion of the control loop - sensor data, computation of control commands, and receipt of the commands would impact operations Telemetry, Tracking and Commanding (TT&C) subsystem provides interface between satellite and ground system. Computations occur within the RF portion of the TT&C subsystem, presenting cyberattack vector Command and Data Handling (C&DH) subsystem is the brains of the satellite. It interfaces with other subsystems, the payload, and the ground. It receives, validate, decodes, and sends commands to other subsystems, and it receives, processes, formats, and routes data for both the ground and onboard computer. C&DH has the most cyber content and is likely the biggest target for cyberattack. Electrical Power Subsystem (EPS) provides, stores, distributes, and controls power on the satellite. An attack on EPS could disrupt, damage, or destroy the satellite. |
|
| SV-SP-1 |
Exploitation of software vulnerabilities (bugs); Unsecure code, logic errors, etc. in the FSW. |
|
| SV-SP-3 |
Introduction of malicious software such as a virus, worm, Distributed Denial-Of-Service (DDOS) agent, keylogger, rootkit, or Trojan Horse |
|
| SV-SP-6 |
Software reuse, COTS dependence, and standardization of onboard systems using building block approach with addition of open-source technology leads to supply chain threat |
|
| SV-SP-9 |
On-orbit software updates/upgrades/patches/direct memory writes. If TT&C is compromised or MOC or even the developer's environment, the risk exists to do a variation of a supply chain attack where after it is in orbit you inject malicious code |
|
| SV-AC-5 |
Proximity operations (i.e., grappling satellite) |
|
| SV-AC-6 |
Three main parts of S/C. CPU, memory, I/O interfaces with parallel and/or serial ports. These are connected via busses (i.e., 1553) and need segregated. Supply chain attack on CPU (FPGA/ASICs), supply chain attack to get malware burned into memory through the development process, and rogue RTs on 1553 bus via hosted payloads are all threats. Security or fault management being disabled by non-mission critical or payload; fault injection or MiTM into the 1553 Bus - China has developed fault injector for 1553 - this could be a hosted payload attack if payload has access to main 1553 bus; One piece of FSW affecting another. Things are not containerized from the OS or FSW perspective; |
|
| SV-AC-8 |
Malicious Use of hardware commands - backdoors / critical commands |
|
| SV-AV-2 |
Satellites base many operations on timing especially since many operations are automated. Cyberattack to disrupt timing/timers could affect the vehicle (Time Jamming / Time Spoofing) |
|
| SV-AV-3 |
Affect the watchdog timer onboard the satellite which could force satellite into some sort of recovery mode/protocol |
|
| SV-IT-3 |
Compromise boot memory |
|
| SV-IT-4 |
Cause bit flip on memory via single event upsets |
|
| SV-MA-8 |
Payload (or other component) is told to constantly sense or emit or run whatever mission it had to the point that it drained the battery constantly / operated in a loop at maximum power until the battery is depleted. |
|
| SV-SP-11 |
Software defined radios - SDR is also another computer, networked to other parts of the spacecraft that could be pivoted to by an attacker and infected with malicious code. Once access to an SDR is gained, the attacker could alter what the SDR thinks is correct frequencies and settings to communicate with the ground. |
|
| SV-SP-7 |
Software can be broken down into three levels (operating system and drivers’ layer, data handling service layer, and the application layer). Highest impact on system is likely the embedded code at the BIOS, kernel/firmware level. Attacking the on-board operating systems. Since it manages all the programs and applications on the computer, it has a critical role in the overall security of the system. Since threats may occur deliberately or due to human error, malicious programs or persons, or existing system vulnerability mitigations must be deployed to protect the OS. |
|
| SV-AV-5 |
Using fault management system against you. Understanding the fault response could be leveraged to get satellite in vulnerable state. Example, safe mode with crypto bypass, orbit correction maneuvers, affecting integrity of TLM to cause action from ground, or some sort of RPO to cause S/C to go into safe mode; |
|
| SV-AV-6 |
Complete compromise or corruption of running state |
|
| SV-DCO-1 |
Not knowing that you were attacked, or attack was attempted |
|
| SV-MA-5 |
Not being able to recover from cyberattack |
|
| SV-AC-1 |
Attempting access to an access-controlled system resulting in unauthorized access |
|
| SV-AC-2 |
Replay of recorded authentic communications traffic at a later time with the hope that the authorized communications will provide data or some other system reaction |
|
| SV-CF-1 |
Tapping of communications links (wireline, RF, network) resulting in loss of confidentiality; Traffic analysis to determine which entities are communicating with each other without being able to read the communicated information |
|
| SV-CF-4 |
Adversary monitors for safe-mode indicators such that they know when satellite is in weakened state and then they launch attack |
|
| SV-IT-1 |
Communications system spoofing resulting in denial of service and loss of availability and data integrity |
|
| SV-AC-7 |
Weak communication protocols. Ones that don't have strong encryption within it |
|
| SV-AV-1 |
Communications system jamming resulting in denial of service and loss of availability and data integrity |
|
| SV-MA-7 |
Exploit ground system and use to maliciously to interact with the spacecraft |
|
| SV-AC-4 |
Masquerading as an authorized entity in order to gain access/Insider Threat |
|
| SV-AV-7 |
The TT&C is the lead contributor to satellite failure over the first 10 years on-orbit, around 20% of the time. The failures due to gyro are around 12% between year one and 6 on-orbit and then ramp up starting around year six and overtake the contributions of the TT&C subsystem to satellite failure. Need to ensure equipment is not counterfeit and the supply chain is sound. |
|
| SV-CF-3 |
Knowledge of target satellite's cyber-related design details would be crucial to inform potential attacker - so threat is leaking of design data which is often stored Unclass or on contractors’ network |
|
| SV-MA-4 |
Not knowing what your crown jewels are and how to protect them now and in the future. |
|
| SV-MA-6 |
Not planning for security on SV or designing in security from the beginning |
|
| SV-SP-10 |
Compromise development environment source code (applicable to development environments not covered by threat SV-SP-1, SV-SP-3, and SV-SP-4). |
|
| SV-SP-2 |
Testing only focuses on functional requirements and rarely considers end to end or abuse cases |
|
| SV-SP-4 |
General supply chain interruption or manipulation |
|
| SV-SP-5 |
Hardware failure (i.e., tainted hardware) {ASIC and FPGA focused} |
|
| SPARTA ID | Requirement | Rationale/Additional Guidance/Notes |
|---|---|---|
| SPR-3 | The [spacecraft] shall enforce approved authorizations for controlling the flow of information within the platform and between interconnected systems so that information does not leave the platform boundary unless it is encrypted. Flow control shall be implemented in conjunction with protected processing domains, security‑policy filters with fully enumerated formats, and a default‑deny communications baseline.{SV-AC-6}{AC-3(3),AC-3(4),AC-4,AC-4(2),AC-4(6),AC-4(21),CA-3,CA-3(6),CA-3(7),CA-9,IA-9,SA-8(19),SC-8(1),SC-16(3)} | Spacecraft operate in constrained and deterministic environments where uncontrolled data flows can enable data exfiltration, cross-domain leakage, or lateral movement between subsystems. Enforcing approved authorizations with enumerated formats and a default-deny posture ensures only explicitly permitted communications occur. Encryption enforcement at platform boundaries prevents unauthorized disclosure of telemetry or state information. |
| SPR-4 | The [spacecraft] security implementation shall ensure that information should not be allowed to flow between partitioned applications unless explicitly permitted by the system.{SV-AC-6,SV-MA-3,SV-SP-7}{AC-3(3),AC-3(4),AC-4,AC-4(6),AC-4(21),CA-9,IA-9,SA-8(3),SA-8(18),SA-8(19),SC-2(2),SC-7(29),SC-16,SC-32} | Strict partitioning prevents compromise of one application from cascading into mission-critical subsystems. Many spacecraft attacks exploit flat architectures where subsystems implicitly trust one another. Explicit inter-partition authorization limits lateral movement and privilege escalation. This supports containment and fault isolation under both cyber and fault conditions. |
| SPR-5 | The [organization] shall state that information should not be allowed to flow between partitioned applications unless explicitly permitted by the Program's security policy.{SV-AC-6}{AC-4,AC-4(6)} | Technical enforcement must be anchored in formal policy to ensure consistency across development, integration, and operations. Codifying partition isolation requirements prevents mission creep and ad hoc exceptions that weaken domain separation. This establishes traceability between architecture design and security governance. It also ensures subcontractors and integrators apply consistent constraints. |
| SPR-7 | The [organization] shall document and design a security architecture using a defense-in-depth approach that allocates the [organization]s defined safeguards to the indicated locations and layers: [Examples include: operating system abstractions and hardware mechanisms to the separate processors in the platform, internal components, and the FSW].{SV-MA-6}{CA-9,PL-7,PL-8,PL-8(1),SA-8(3),SA-8(4),SA-8(7),SA-8(9),SA-8(11),SA-8(13),SA-8(19),SA-8(29),SA-8(30)} | Spacecraft security cannot rely on a single control; layered defenses reduce the likelihood of catastrophic compromise. Documenting safeguard allocation across hardware, OS, firmware, and FSW ensures coverage across attack surfaces. This supports resiliency against both cyber intrusion and supply chain weaknesses. Clear documentation enables verification and independent assessment. |
| SPR-8 | The [organization] shall ensure that the allocated security safeguards operate in a coordinated and mutually reinforcing manner.{SV-MA-6}{CA-7(5),PL-7,PL-8(1),SA-8(19)} | Independent controls that operate in isolation may create security gaps or conflicting behaviors. Coordinated safeguards ensure that encryption, authentication, partitioning, and monitoring functions reinforce each other rather than undermine availability or safety. This reduces bypass risk and improves fault/cyber response integration. Cohesive operation is essential for resilient mission assurance. |
| SPR-9 | The [organization] shall implement a security architecture and design that provides the required security functionality, allocates security controls among physical and logical components, and integrates individual security functions, mechanisms, and processes together to provide required security capabilities and a unified approach to protection.{SV-MA-6}{PL-7,SA-2,SA-8,SA-8(1),SA-8(2),SA-8(3),SA-8(4),SA-8(5),SA-8(6),SA-8(7),SA-8(9),SA-8(11),SA-8(13),SA-8(19),SA-8(29),SA-8(30),SC-32,SC-32(1)} | Security functionality must be intentionally distributed across physical and logical components rather than bolted on post-design. A unified architecture prevents inconsistent enforcement, duplicated controls, or unprotected interfaces. Integrated design reduces attack surface and improves verification of mission-critical protections. |
| SPR-10 | The [spacecraft] shall protect authenticator content from unauthorized disclosure and modification.{SV-AC-1,SV-AC-3}{AC-17(6),CM-3(6),IA-5,IA-5(6),RA-5(4),SA-8(18),SA-8(19),SC-28(3)} | Authenticators (keys, tokens, counters, certificates) are primary targets for persistent access attacks. Disclosure or modification enables command spoofing, replay, and privilege escalation. Protecting authenticator content preserves command integrity and prevents adversaries from maintaining covert control. Integrity protections must apply both at rest and in use. |
| SPR-14 | The [spacecraft] shall authenticate the ground station (and all commands) and other spacecraft before establishing remote connections using bidirectional authentication that is cryptographically based.{SV-AC-1,SV-AC-2}{AC-3,AC-17,AC-17(2),AC-17(10),AC-18(1),AC-20,IA-3(1),IA-4,IA-4(9),IA-7,IA-9,SA-8(18),SA-8(19),SA-9(2),SC-7(11),SC-16(1),SC-16(2),SC-16(3),SC-23(3),SI-3(9)} | Authorization can include embedding opcodes in command strings, using trusted authentication protocols, identifying proper link characteristics such as emitter location, expected range of receive power, expected modulation, data rates, communication protocols, beamwidth, etc.; and tracking command counter increments against expected values. |
| SPR-16 | The [spacecraft] shall ensure that processes reusing a shared system resource (e.g., registers, main memory, secondary storage) do not have access to information (including encrypted representations of information) previously stored in that resource after formal release, by clearing or zeroizing the resource prior to reuse.{SV-AC-6}{AC-3,PM-32,SA-8(2),SA-8(5),SA-8(6),SA-8(19),SC-4,SI-3} | Residual data in memory or registers can create covert channels or leakage paths between partitions. Zeroization prevents recovery of sensitive data by subsequent processes. This mitigates cross-domain leakage and memory scraping attacks. Clearing encrypted remnants is equally important to prevent cryptanalytic exploitation. |
| SPR-19 | The [spacecraft] shall encrypt all telemetry on downlink regardless of operating mode to protect current state of spacecraft.{SV-CF-4}{AC-3(10),RA-5(4),SA-8(18),SA-8(19),SC-8,SC-8(1),SC-13} | Telemetry exposes real-time spacecraft state and configuration. Unencrypted telemetry can reveal vulnerabilities, operational status, or targeting information. Enforcing encryption across all modes prevents intelligence collection and mission state inference. This mitigates passive RF interception threats. |
| SPR-20 | The [spacecraft] shall prevent use of a mode of operations where cryptography on the TT&C link can be disabled; encryption and authentication shall remain enabled even when automated access control mechanisms are overridden.{SV-AC-1,SV-CF-1,SV-CF-2}{AC-3(10),SA-8(18),SA-8(19),SC-16(2),SC-16(3),SC-40,SC-40(4)} | Emergency or override modes often become attack vectors if protections are weakened. Cryptography must remain enforced even during safe-mode or degraded operations. Removing encryption capability creates a single-point catastrophic exposure. Persistent protection ensures no operational shortcut undermines mission assurance. |
| SPR-21 | The [spacecraft], when transferring information between different security domains, shall implement security‑policy filters that require fully enumerated formats that restrict data structure and content.{SV-AC-6}{AC-3(3),AC-3(4),AC-4(14),IA-9,SA-8(19),SC-16,SI-10} | Fully enumerated formats prevent injection of malformed or malicious data across security domains. This reduces parser exploitation, data smuggling, and covert channel abuse. Strict domain filtering supports deterministic and auditable inter-domain communication. Only explicitly defined data structures should be permitted. |
| SPR-22 | The [spacecraft] shall implement boundary protections to separate bus, communications, and payload components supporting their respective functions.{SV-AC-6}{AC-3(3),AC-3(4),CA-9,SA-8(3),SA-8(14),SA-8(18),SA-8(19),SA-17(7),SC-2,SC-2(2),SC-7(13),SC-7(21),SC-7(29),SC-16(3),SC-32,SI-3,SI-4(13),SI-4(25)} | Flat architectures allow compromise of one subsystem to impact all others. Segregated boundaries reduce lateral movement and mission degradation. Isolation ensures payload compromise does not impact TT&C or bus control. This supports containment and survivability. |
| SPR-23 | The [spacecraft] shall isolate mission critical functionality from non-mission critical functionality.{SV-AC-6}{AC-3(3),AC-3(4),CA-9,SA-8(3),SA-8(19),SA-17(7),SC-2,SC-3,SC-3(4),SC-7(13),SC-7(29),SC-32,SC-32(1),SI-3,SI-7(10),SI-7(12)} | Non-critical functions often expand attack surface. Isolation prevents less-trusted components from affecting propulsion, attitude control, or power systems. This reduces cascading failure risk under compromise. Mission-critical systems must maintain operational continuity. |
| SPR-24 | The [spacecraft] data within partitioned applications shall not be read or modified by other applications/partitions.{SV-AC-6}{AC-3(3),AC-3(4),SA-8(19),SC-2(2),SC-4,SC-6,SC-32} | Application partitions must enforce strict read/write controls to prevent unauthorized state modification. Without this control, malicious code can alter mission parameters or falsify telemetry. Isolation protects integrity of subsystem data and prevents corruption propagation. |
| SPR-25 | The [spacecraft] shall prevent unauthorized access to system resources by employing an efficient capability based object model that supports both confinement and revocation of these capabilities when the platform security deems it necessary.{SV-AC-6}{AC-3(8),IA-4(9),PM-32,SA-8(2),SA-8(5),SA-8(6),SA-8(18),SA-8(19),SC-2(2),SC-4,SC-16,SC-32,SI-3} | Capability models restrict access to explicit, revocable tokens of authority. This enforces least privilege and supports dynamic revocation under threat conditions. Confinement reduces damage radius of compromised processes. Revocation capability enables adaptive cyber response. |
| SPR-26 | The [spacecraft] shall use protected processing domains to enforce the policy that information does not leave the platform boundary unless it is encrypted as a basis for flow‑control decisions and shall enumerate permitted inter‑domain flows and enforce domain‑gate checks on any domain switch. {SV-AC-6}{AC-4(2),IA-9,SA-8(19),SC-8(1),SC-16(3)} | Domain gates provide controlled transition points between security domains. Enumerated flows prevent unintentional data leakage and enforce encryption policies at boundaries. This mitigates cross-domain injection and exfiltration. Strong gate enforcement prevents privilege escalation during context switching. |
| SPR-28 | The [spacecraft] shall provide the capability to enter the platform into a known good, operational cyber-safe mode from a tamper-resistant, configuration-controlled (“gold”) image that is authenticated as coming from an acceptable supplier, and has its integrity verified. The [spacecraft] shall refresh only from cryptographically authenticated [organization]-approved sources.{SV-AV-5,SV-AV-6,SV-AV-7}{CP-10(6),CP-12,CP-13,IR-4(3),SA-8(16),SA-8(19),SA-8(21),SA-8(24),SI-13,SI-17} | Cyber-safe mode is an operating mode of a spacecraft during which all nonessential systems are shut down and the spacecraft is placed in a known good state using validated software and configuration settings. Within cyber-safe mode authentication and encryption should still be enabled. The spacecraft should be capable of reconstituting firmware and SW functions to preattack levels to allow for the recovery of functional capabilities. This can be performed by self-healing, or the healing can be aided from the ground. However, the spacecraft needs to have the capability to replan, based on available equipment still available after a cyberattack. The goal is for the vehicle to resume full mission operations. If not possible, a reduced level of mission capability should be achieved. |
| SPR-29 | The [spacecraft] shall enter cyber-safe mode software/configuration should be stored onboard the spacecraft in memory with hardware-based controls and should not be modifiable.{CP-10(6),CP-13,SA-8(16),SA-8(19),SA-8(21),SA-8(24),SI-17} | |
| SPR-30 | The [spacecraft] shall fail to a known secure state for failures during initialization, and aborts preserving information necessary to return to operations in failure.{SV-AV-5,SV-AV-6,SV-AV-7}{CP-10(6),CP-13,SA-8(16),SA-8(19),SA-8(24),SC-24,SI-13,SI-17} | |
| SPR-33 | The [spacecraft] shall utilize TRANSEC. TRANSEC shall be implemented and verified as a distinct layer in coordination with Traffic Flow Security and RF anti‑fingerprinting.{SV-AV-1}{CP-8,RA-5(4),SA-8(18),SA-8(19),SC-8(1),SC-8(4),SC-16,SC-16(1),SC-16(2),SC-16(3),SC-40,SC-40(4)} | Transmission Security (TRANSEC) is used to ensure the availability of transmissions and limit intelligence collection from the transmissions. TRANSEC is secured through burst encoding, frequency hopping, or spread spectrum methods where the required pseudorandom sequence generation is controlled by a cryptographic algorithm and key. Such keys are known as transmission security keys (TSK). The objectives of transmission security are low probability of interception (LPI), low probability of detection (LPD), and antijam which means resistance to jamming (EPM or ECCM). |
| SPR-34 | The [spacecraft] shall recover to a known cyber-safe state when an anomaly is detected.{IR-4,IR-4(1),SA-8(16),SA-8(19),SA-8(21),SA-8(24),SI-3,SI-4(7),SI-10(6),SI-13,SI-17} | |
| SPR-35 | The [spacecraft] shall perform an orderly, controlled system shut-down to a known cyber-safe state upon receipt of a termination command or condition.{PE-11,PE-11(1),SA-8(16),SA-8(19),SA-8(24),SI-17} | |
| SPR-36 | The [spacecraft] shall operate securely in off-nominal power conditions, including loss of power and spurious power transients.{SV-AV-6,SV-MA-2}{PE-11,PE-11(1),SA-8(16),SA-8(19),SI-13,SI-17} | Power anomalies may induce undefined states exploitable by attackers. Cryptographic and security mechanisms must not degrade into insecure configurations during brownout or transient conditions. This mitigates fault-induced bypass attacks. Resilient operation preserves trust chain continuity. |
| SPR-37 | The [spacecraft] shall protect system components, associated data communications, and communication buses in accordance with: (i) national emissions and TEMPEST policies and procedures, and (ii) the security category or sensitivity of the transmitted information, and shall demonstrate compliance via pre‑launch TEMPEST‑like evaluation for co‑located payload configurations.{SV-CF-2,SV-MA-2}{PE-14,PE-19,PE-19(1),RA-5(4),SA-8(18),SA-8(19),SC-8(1)} | The measures taken to protect against compromising emanations must be in accordance with DODD S-5200.19, or superseding requirements. The concerns addressed by this control during operation are emanations leakage between multiple payloads within a single space platform, and between payloads and the bus. |
| SPR-39 | The [spacecraft] shall prevent unauthorized and unintended information transfer via shared system resources.{SV-AC-6}{PM-32,SA-8(2),SA-8(5),SA-8(6),SA-8(19),SC-2(2),SC-4} | Shared buses, memory, or peripherals can become covert channels. Controls must prevent unintended information propagation across shared infrastructure. This mitigates cross-partition leakage and data exfiltration. Shared resources must not undermine domain isolation. |
| SPR-40 | The [spacecraft] shall only use communication protocols that support encryption within the mission.{SV-AC-7,SV-CF-1,SV-CF-2}{SA-4(9),SA-8(18),SA-8(19),SC-40(4)} | Protocols lacking encryption create unavoidable exposure. Selecting encryption-capable protocols ensures confidentiality and integrity can be enforced mission-wide. This reduces risk from protocol downgrade attacks. |
| SPR-41 | The [spacecraft] shall maintain a separate execution domain for each executing process.{SV-AC-6}{SA-8(14),SA-8(19),SC-2(2),SC-7(21),SC-39,SI-3} | Process isolation prevents one compromised task from impacting others. Separate execution domains mitigate memory corruption and privilege escalation. This strengthens containment of malicious code. Deterministic isolation enhances both safety and cybersecurity. |
| SPR-42 | The [spacecraft] flight software shall not be able to tamper with the security policy or its enforcement mechanisms.{SV-AC-6}{SA-8(16),SA-8(19),SC-3,SC-7(13)} | Security enforcement must be independent of mission application logic. If FSW can alter policy, adversaries can disable protections post-compromise. This control preserves integrity of access controls and monitoring functions. Separation of enforcement from application reduces systemic risk. |
| SPR-43 | The [spacecraft] shall initialize the platform to a known safe state.{SA-8(19),SA-8(23),SA-8(24),SI-17} | |
| SPR-46 | The [spacecraft] shall monitor [Program‑defined telemetry points] for malicious commanding attempts and alert ground operators upon detection.{SV-AC-2,SV-IT-1,SV-DCO-1}{AC-17,AC-17(1),AC-17(10),AU-3(1),RA-10,SC-7,SC-16,SC-16(2),SC-16(3),SI-3(8),SI-4,SI-4(1),SI-4(13),SI-4(24),SI-4(25),SI-10(6)} | Telemetry-based detection enables identification of anomalous command patterns, replay attempts, and injection attacks. Early detection allows rapid containment before mission impact escalates. Onboard monitoring is critical when ground latency limits intervention. This supports proactive defense. |
| SPR-47 | The [spacecraft] shall implement relay and replay-resistant authentication mechanisms for establishing a remote connection.{SV-AC-1,SV-AC-2}{AC-3,IA-2(8),IA-2(9),SA-8(18),SC-8(1),SC-16(1),SC-16(2),SC-23(3),SC-40(4)} | Replay attacks can reuse valid command packets to manipulate spacecraft behavior. Freshness checks, nonces, and sequence enforcement prevent reuse of captured transmissions. Relay resistance mitigates man-in-the-middle exploitation. This protects command integrity over RF links. |
| SPR-53 | The [organization] shall employ automated tools that provide notification to ground operators upon discovering discrepancies during integrity verification.{CM-3(5),CM-6,IR-6,IR-6(2),SA-8(21),SC-51,SI-3,SI-4(7),SI-4(12),SI-4(24),SI-7(2)} | |
| SPR-56 | The [spacecraft] shall provide automated onboard mechanisms that integrate audit review, analysis, and reporting processes to support mission processes for investigation and response to suspicious activities to determine the attack class in the event of a cyber attack.{SV-DCO-1}{AU-6(1),IR-4,IR-4(1),IR-4(12),IR-4(13),PM-16(1),RA-10,SA-8(21),SA-8(22),SC-5(3),SI-3,SI-3(10),SI-4(7),SI-4(24),SI-7(7)} | * Identifying the class (e.g., exfiltration, Trojans, etc.), nature, or effect of cyberattack (e.g., exfiltration, subverted control, or mission interruption) is necessary to determine the type of response. The first order of identification may be to determine whether the event is an attack or a non-threat event (anomaly). The objective requirement would be to predict the impact of the detected signature. * Unexpected conditions can include RF lockups, loss of lock, failure to acquire an expected contact and unexpected reports of acquisition, unusual AGC and ACS control excursions, unforeseen actuator enabling's or actions, thermal stresses, power aberrations, failure to authenticate, software or counter resets, etc. Mitigation might include additional TMONs, more detailed AGC and PLL thresholds to alert operators, auto-capturing state snapshot images in memory when unexpected conditions occur, signal spectra measurements, and expanded default diagnostic telemetry modes to help in identifying and resolving anomalous conditions. |
| SPR-57 | The [spacecraft] shall monitor and collect all onboard cyber- data (from multiple system components), including identification of potential attacks and information about the attack for subsequent analysis.{SV-DCO-1}{AC-6(9),AC-20,AC-20(1),AU-2,AU-12,IR-4,IR-4(1),RA-10,SI-3,SI-3(10),SI-4,SI-4(1),SI-4(2),SI-4(7),SI-4(24)} | The spacecraft will monitor and collect data that provides accountability of activity occurring onboard the spacecraft. Due to resource limitations on the spacecraft, analysis must be performed to determine which data is critical for retention and which can be filtered. Full system coverage of data and actions is desired as an objective; it will likely be impractical due to the resource limitations. “Cyber-relevant data” refers to all data and actions deemed necessary to support accountability and awareness of onboard cyber activities for the mission. This would include data that may indicate abnormal activities, critical configuration parameters, transmissions on onboard networks, command logging, or other such data items. This set of data items should be identified early in the system requirements and design phase. Cyber-relevant data should support the ability to assess whether abnormal events are unintended anomalies or actual cyber threats. Actual cyber threats may rarely or never occur, but non-threat anomalies occur regularly. The ability to filter out cyber threats for non-cyber threats in relevant time would provide a needed capability. Examples could include successful and unsuccessful attempts to access, modify, or delete privileges, security objects, security levels, or categories of information (e.g., classification levels). |
| SPR-58 | The [spacecraft] shall generate cyber related audit records containing information that establishes what type of event occurred, when the event occurred, where the event occurred, the source of the event, and the outcome of the event. For privileged or hazardous commands, the audit record shall include the approver identifiers and the command identifier.{SV-DCO-1}{AU-3,AU-3(1),AU-12,IR-4,IR-4(1),RA-10,SI-3,SI-3(10),SI-4(7),SI-4(24)} | Detailed audit records are essential for attribution, anomaly detection, and post-incident forensic reconstruction. Capturing what occurred, when, where, and by whom enables rapid differentiation between system fault and adversarial activity. Including approver identifiers for privileged or hazardous commands strengthens accountability and insider threat mitigation. Without complete audit context, recovery and containment decisions may be delayed or misinformed. |
| SPR-59 | The [spacecraft] shall attribute cyber attacks and identify unauthorized use of the platform by downlinking onboard cyber information to the mission ground station within [Program‑defined time ≤ 3 minutes].{SV-DCO-1,SV-IT-1,SV-IT-2}{AU-4(1),IR-4,IR-4(1),IR-4(12),IR-4(13),RA-10,SA-8(22),SI-3,SI-3(10),SI-4,SI-4(5),SI-4(7),SI-4(12),SI-4(24)} | Rapid transmission of cyber-relevant telemetry supports near-real-time ground-based fusion and correlation with enterprise security events. Delayed reporting increases risk of adversary persistence or mission degradation. Early attribution enables containment actions before cascading effects occur. Defined timeliness ensures detection capability aligns with operational tempo. |
| SPR-60 | The [spacecraft] shall integrate cyber related detection and responses with existing fault management capabilities to ensure tight integration between traditional fault management and cyber intrusion detection and prevention.{SV-DCO-1}{AU-6(4),IR-4,IR-4(1),RA-10,SA-8(21),SA-8(26),SC-3(4),SI-3,SI-3(10),SI-4(7),SI-4(13),SI-4(16),SI-4(24),SI-4(25),SI-7(7),SI-13} | The onboard IPS system should be integrated into the existing onboard spacecraft fault management system (FMS) because the FMS has its own fault detection and response system built in. SV corrective behavior is usually limited to automated fault responses and ground commanded recovery actions. Intrusion prevention and response methods will inform resilient cybersecurity design. These methods enable detected threat activity to trigger defensive responses and resilient SV recovery. |
| SPR-61 | The [spacecraft] shall protect information obtained from logging/intrusion-monitoring from unauthorized access, modification, and deletion.{SV-DCO-1}{AU-9,AU-9(3),RA-10,SI-4(7),SI-4(24)} | Monitoring data is a high-value target for attackers seeking to evade detection or erase traces of compromise. Protecting log integrity preserves evidentiary value and detection continuity. Unauthorized modification or deletion could mask malicious behavior or delay response. Cryptographic protection and access controls ensure monitoring mechanisms cannot be silently disabled. |
| SPR-62 | The [spacecraft] shall enter a cyber-safe mode when conditions that threaten the platform are detected, enters a cyber-safe mode of operation with restrictions as defined based on the cyber-safe mode.{SV-AV-5,SV-AV-6,SV-AV-7}{CP-10(6),CP-12,CP-13,IR-4,IR-4(1),IR-4(3),PE-10,RA-10,SA-8(16),SA-8(21),SA-8(24),SI-3,SI-4(7),SI-13,SI-17} | Cyber-safe mode provides a deterministic fallback posture when compromise or anomalous conditions threaten mission integrity. Restricting non-essential functions reduces attack surface and prevents further propagation of malicious activity. Defined restrictions ensure predictable behavior under cyber stress conditions. This supports survivability and controlled recovery rather than uncontrolled degradation. |
| SPR-63 | The [spacecraft] shall be able to locate the onboard origin of a cyber attack and alert ground operators within [Program‑defined time ≤ 3 minutes].{SV-DCO-1}{IR-4,IR-4(1),IR-4(12),IR-4(13),RA-10,SA-8(22),SI-3,SI-3(10),SI-4,SI-4(1),SI-4(7),SI-4(12),SI-4(16),SI-4(24)} | The origin of any attack onboard the vehicle should be identifiable to support mitigation. At the very least, attacks from critical element (safety-critical or higher-attack surface) components should be locatable quickly so that timely action can occur. |
| SPR-64 | The [spacecraft] shall detect and deny unauthorized outgoing communications posing a threat to the spacecraft.{SV-DCO-1}{IR-4,IR-4(1),RA-5(4),RA-10,SC-7(9),SC-7(10),SI-4,SI-4(1),SI-4(4),SI-4(7),SI-4(11),SI-4(13),SI-4(24),SI-4(25)} | Outbound communications may indicate data exfiltration, covert channels, or compromised subsystem behavior. Monitoring and blocking unauthorized egress prevents leakage of mission data or cryptographic material. Many attacks rely on command-and-control or data extraction channels; egress control disrupts this persistence mechanism. Outbound traffic should be as tightly controlled as inbound command paths. |
| SPR-65 | The [spacecraft] shall select and execute safe countermeasures against cyber attacks prior to entering cyber-safe mode.{SV-DCO-1}{IR-4,RA-10,SA-8(21),SA-8(24),SI-4(7),SI-17} | These countermeasures are a ready supply of options to triage against the specific types of attack and mission priorities. Minimally, the response should ensure vehicle safety and continued operations. Ideally, the goal is to trap the threat, convince the threat that it is successful, and trace and track the attacker exquisitely—with or without ground aiding. This would support successful attribution and evolving countermeasures to mitigate the threat in the future. “Safe countermeasures” are those that are compatible with the system’s fault management system to avoid unintended effects or fratricide on the system." These countermeasures are likely executed prior to entering into a cyber-safe mode. |
| SPR-68 | The [spacecraft] shall have on-board intrusion detection/prevention system that monitors the mission critical components or systems.{SV-AC-1,SV-AC-2,SV-MA-4}{RA-10,SC-7,SI-3,SI-3(8),SI-4,SI-4(1),SI-4(7),SI-4(13),SI-4(24),SI-4(25),SI-10(6)} | The mission critical components or systems could be GNC/Attitude Control, C&DH, TT&C, Fault Management. |
| SPR-69 | The [spacecraft] shall alert in the event of the audit/logging processing failures.{SV-DCO-1}{AU-5,AU-5(1),AU-5(2),SI-3,SI-4,SI-4(1),SI-4(7),SI-4(12),SI-4(24)} | Failure of logging mechanisms may signal active tampering or resource exhaustion attacks. Immediate alerting ensures loss of visibility does not go unnoticed. Silent failure of audit systems creates blind spots exploitable by adversaries. Monitoring the monitors is critical to resilient detection. |
| SPR-70 | The [spacecraft] shall provide an alert immediately to [at a minimum the mission director, administrators, and security officers] when the following failure events occur: [minimally but not limited to: auditing software/hardware errors; failures in the audit capturing mechanisms; and audit storage capacity reaching 95%, 99%, and 100%] of allocated capacity, including security component failover events; alerts shall include component identity, time, and fault reason.{SV-DCO-1}{AU-5,AU-5(1),AU-5(2),SI-4,SI-4(1),SI-4(7),SI-4(12),SI-4(24),SI-7(7)} | Intent is to have human on the ground be alerted to failures. This can be decomposed to SV to generate telemetry and to Ground to alert. |
| SPR-71 | The [spacecraft] shall provide the capability of a cyber “black-box” to capture necessary data for cyber forensics of threat signatures and anomaly resolution when cyber attacks are detected. The [spacecraft] shall automatically route audit events to the alternate audit logging capability upon primary audit failure and shall resynchronize the alternate store to the primary upon recovery.{SV-DCO-1}{AU-5(5),AU-9(2),AU-9(3),AU-12,IR-4(12),IR-4(13),IR-5(1),SI-3,SI-3(10),SI-4,SI-4(1),SI-4(7),SI-4(24),SI-7(7)} | Similar concept of a "black box" on an aircraft where all critical information is stored for post forensic analysis. Black box can be used to record CPU utilization, GNC physical parameters, audit records, memory contents, TT&C data points, etc. The timeframe is dependent upon implementation but needs to meet the intent of the requirement. For example, 30 days may suffice. |
| SPR-72 | The [spacecraft] shall automatically notify ground operators when onboard integrity verification detects discrepancies.{SV-IT-2}{CM-3(5),SA-8(21),SI-3,SI-4(7),SI-4(12),SI-4(24),SI-7(2),SI-7(12)} | Integrity check failures may indicate unauthorized modification, corruption, or hardware faults induced by malicious activity. Automatic notification ensures ground teams can rapidly assess risk and initiate recovery procedures. Delay in reporting increases mission impact. Transparency between onboard detection and ground response is essential for coordinated defense. |
| SPR-73 | The [spacecraft], upon detection of a potential integrity violation, shall provide the capability to [audit the event and alert ground operators].{SV-DCO-1}{CM-3(5),SA-8(21),SI-3,SI-4(7),SI-4(12),SI-4(24),SI-7(8)} | One example would be for bad commands where the system would reject the command and not increment the Vehicle Command Counter (VCC) and include the information in telemetry. |
| SPR-74 | The [organization] shall define the security safeguards that are to be automatically employed when integrity violations are discovered.{SV-IT-2}{CP-2,SA-8(21),SI-3,SI-4(7),SI-4(12),SI-7(5),SI-7(8)} | Predefined safeguards ensure consistent and timely response to detected integrity violations. Ad hoc response increases uncertainty and recovery time. Automated actions may include isolation, reconstitution from gold images, or transition to cyber-safe mode. Defined response paths improve resilience and reduce operator burden during crisis. |
| SPR-77 | The [spacecraft] shall employ the principle of least privilege, allowing only authorized accesses processes which are necessary to accomplish assigned tasks in accordance with system functions.{SV-AC-6}{AC-3,AC-6,AC-6(9),CA-9,CM-5,CM-5(5),CM-5(6),SA-8(2),SA-8(5),SA-8(6),SA-8(14),SA-8(23),SA-17(7),SC-2,SC-7(29),SC-32,SC-32(1),SI-3} | Least privilege limits damage from compromised processes or insider misuse. Processes receive only the minimum access necessary for assigned functions. This reduces lateral movement and privilege escalation pathways. In deterministic spacecraft systems, privilege boundaries must be tightly defined and enforced. |
| SPR-78 | The [spacecraft] shall provide independent mission/cyber critical threads such that any one credible event will not corrupt another mission/cyber critical thread.{SV-AC-6,SV-MA-3,SV-SP-7}{SC-3,SC-32,SC-32(1),SI-3,SI-13} | Segregating mission-critical and cyber-critical execution paths prevents a single failure or compromise from corrupting other critical functions. Thread independence supports fault containment and resilience under attack. This ensures availability of essential functions even during partial compromise. Isolation strengthens both safety and cybersecurity. |
| SPR-81 | The [spacecraft] shall perform an integrity check of software, firmware, and information at startup or during security- events.{SV-IT-3,SV-SP-7,SV-SP-3}{CM-3(5),SA-8(9),SA-8(11),SA-8(21),SI-3,SI-7(1),SI-7(10),SI-7(12),SI-7(17)} | Startup integrity checks detect boot-level compromise or unauthorized modification. Event-triggered checks provide additional protection when anomalies occur. This limits adversary persistence across reboots. Continuous validation reinforces trusted boot regimes. |
| SPR-87 | The [spacecraft] shall be configured to provide only essential capabilities.{SV-SP-7,SV-SP-1}{CM-6,CM-7,SA-8(2),SA-8(7),SA-8(13),SA-8(23),SA-8(26),SA-15(5)} | Minimizing enabled functionality reduces attack surface and complexity. Unused services create unnecessary exposure. Essential-only configuration aligns with least functionality principles. This simplifies validation and reduces exploit vectors. |
| SPR-88 | The [spacecraft] shall detect and recover from detected memory errors or transitions to a known cyber-safe state.{SV-IT-4,SV-AV-6}{IR-4,IR-4(1),SA-8(16),SA-8(24),SI-3,SI-4(7),SI-10(6),SI-13,SI-17} | Memory corruption may result from radiation, fault injection, or malicious manipulation. Detection prevents silent data corruption from propagating to mission-critical functions. Recovery mechanisms or safe-state transitions preserve availability. Rapid containment supports mission survivability. |
| SPR-96 | The [spacecraft] shall uniquely identify and authenticate the ground station and other spacecraft before establishing a remote connection.{SV-AC-1,SV-AC-2}{AC-3,AC-17,AC-17(10),AC-20,IA-3,IA-4,SA-8(18),SI-3(9)} | |
| SPR-97 | All [spacecraft] commands which have unrecoverable consequence must have dual authentication prior to command execution. The [spacecraft] shall verify two independent cryptographic approvals prior to execution and shall generate an audit record binding both approver identifiers to the command identifier, time, and outcome.{SV-AC-4,SV-AC-8,SV-AC-2}{AU-9(5),IA-3,IA-4,IA-10,PE-3,PM-12,SA-8(15),SA-8(21),SC-16(2),SC-16(3),SI-3(8),SI-3(9),SI-4(13),SI-4(25),SI-7(12),SI-10(6),SI-13} | Commands with irreversible impact require heightened assurance to prevent catastrophic mission loss. Dual independent cryptographic approvals mitigate insider threat, key compromise, and single-point credential abuse. Binding approver identifiers to the audit trail strengthens accountability and deterrence. This reduces the probability of unauthorized hazardous command execution. |
| SPR-98 | The [spacecraft] shall have a method to ensure the integrity of which have unrecoverable consequence and validate their authenticity before execution.{SV-AC-2,SV-IT-2,SV-IT-1}{AU-9(5),IA-3,IA-4,IA-10,PE-3,PM-12,SA-8(15),SA-8(21),SC-16(2),SC-16(3),SI-3(8),SI-3(9),SI-4(13),SI-4(25),SI-7(12),SI-10(6),SI-13} | Hazardous commands must be cryptographically protected and validated prior to execution. Integrity and authenticity checks prevent replay, modification, or injection of destructive instructions. Without validation, RF interception or command path compromise could result in mission-ending actions. This ensures critical commands are both authorized and unaltered. |
| SPR-105 | The [spacecraft] shall provide two independent and unique command messages to deactivate a fault tolerant capability for a critical or catastrophic hazard.{AC-3(2),PE-10,SA-8(15)} | |
| SPR-107 | The [spacecraft] shall have multiple uplink paths {SV-AV-1}{CP-8,CP-11,SA-8(18),SC-5,SC-47} | Redundant uplink paths preserve command capability during jamming, interference, or subsystem failure. Availability is a core mission assurance objective. Diverse communication channels reduce single-point failure risk. This enhances resiliency in contested RF environments. |
| SPR-108 | The [organization] shall define the resources to be allocated to protect the availability of system resources.{SV-AC-6}{CP-2(2),SC-6} | Availability protections require deliberate allocation of compute, power, bandwidth, and monitoring capacity. Without predefined resource allocation, defensive measures may compete with mission operations. Planning ensures resilience mechanisms do not degrade core functionality. This supports continuity during denial-of-service conditions. |
| SPR-116 | The [organization] shall ensure reused TT&C software has adequate uniqueness for command decoders/dictionaries so that commands are received by only the intended satellite.{SV-SP-6}{AC-17(10),SC-16(3),SI-3(9)} | The goal is to eliminate risk that compromise of one command database does not affect a different one due to reuse. The intent is to ensure that one SV can not process the commands from another SV. Given the crypto setup with keys and VCC needing to match, this requirement may be inherently met as a result of using type-1 cryptography. The intent is not to recreate entire command dictionaries but have enough uniqueness in place that it prevents a SV from receiving a rogue command. As long as there is some uniqueness at the receiving end of the commands, that is adequate. |
| SPR-120 | The [spacecraft] shall terminate the connection associated with a communications session at the end of the session or after 3 minutes of inactivity.{SV-AC-1}{AC-12,SA-8(18),SC-10,SC-23(1),SC-23(3),SI-14,SI-14(3)} | Persistent sessions increase exposure to hijacking and replay attacks. Automatic termination limits session lifetime and reduces unauthorized reuse. Idle timeout reduces attack surface in unattended conditions. Explicit closure supports session state integrity. |
| SPR-121 | The [organiztion] shall maintain the ability to establish communication with the spacecraft in the event of an anomaly to the primary receive path.{SV-AV-1,SV-IT-1}{CP-8,SA-8(18),SC-47} | Receiver communication can be established after an anomaly with such capabilities as multiple receive apertures, redundant paths within receivers, redundant receivers, omni apertures, fallback default command modes, and lower bit rates for contingency commanding, as examples |
| SPR-127 | The [spacecraft] shall be configured to deny communications by default and only permit authorized communications based on approved exceptions, establishing a default‑deny baseline with permitted flows whitelisted.{SV-AC-1,SV-IT-1}{SC-7(5),AC-4(2)} | Deny-by-default limits attack surface by permitting only explicitly authorized flows. Whitelisting prevents unexpected communications and covert channels. This reduces exploitation opportunities. Deterministic communication baselines simplify monitoring and anomaly detection. |
| SPR-184 | The [spacecraft] software subsystems shall provide independent mission/cyber critical threads such that any one credible event will not corrupt another mission/cyber critical thread.{SV-MA-3,SV-AV-7}{SC-3} | Thread isolation prevents cascading failures from a single compromised execution path. Functional independence enhances resilience against exploitation and fault propagation. Critical functions must not share dependencies that create systemic vulnerabilities. Isolation supports containment and recovery. |
| SPR-202 | The [organization] shall define the security safeguards to be employed to protect the availability of system resources.{SV-AC-6}{SC-6,SI-17} | Explicit availability planning ensures defensive resources are provisioned. Clear safeguards prevent ad hoc reactions during incidents. Structured resilience planning supports mission assurance. Availability is often a primary operational objective. |
| SPR-203 | The [spacecraft] shall have failure tolerance on sensors used by software to make mission-critical decisions.{SV-MA-3,SV-AV-7}{SI-13,SI-17} | Sensor compromise or failure must not directly lead to hazardous action. Redundancy and validation ensure trustworthy inputs. Independent verification reduces risk of manipulation. Critical decisions require reliable sensing. |
| SPR-204 | The [spacecraft] cyber-safe mode software/configuration shall be stored onboard the spacecraft in memory with hardware-based controls and shall not be modifiable.{SV-AV-5,SV-AV-6,SV-AV-7}{SI-17} | Cyber-safe mode is using a fail-secure mentality where if there is a malfunction that the spacecraft goes into a fail-secure state where cyber protections like authentication and encryption are still employed (instead of bypassed) and the spacecraft can be restored by authorized commands. The cyber-safe mode should be stored in a high integrity location of the on-board SV so that it cannot be modified by attackers. |
| SPR-205 | The [spacecraft] shall safely transition between all predefined, known states.{SV-AV-5,SV-AV-3,SV-AV-6}{SI-17} | Deterministic transitions prevent undefined or unstable states. Controlled state management limits exploitation windows. Safety logic must anticipate abnormal conditions. Predictable behavior enhances resilience. |
| SPR-206 | The [spacecraft] software subsystems shall detect and recover/transition from detected memory errors to a known cyber-safe state.{SV-MA-3,SV-AV-7}{SI-17} | Memory corruption can degrade or hijack execution. Automated detection and transition to safe state prevents escalation. Recovery mechanisms reduce persistent compromise risk. Resilience requires automatic containment. |
| SPR-207 | The [spacecraft] software subsystems shall initialize the spacecraft to a known safe state.{SV-MA-3,SV-AV-7}{SI-17} | Startup is a vulnerable period for tampering. Initialization ensures clean baseline before operations begin. Safe defaults prevent unauthorized persistence. Boot integrity establishes trust. |
| SPR-208 | The [spacecraft] software subsystems shall operate securely in off-nominal power conditions, including loss of power and spurious power transients.{SV-MA-3,SV-AV-7}{SI-17} | Power instability may disrupt security controls. Robust design prevents exploit via induced power anomalies. Controlled behavior during transients preserves integrity. Cyber resilience must consider physical fault conditions. |
| SPR-209 | The [spacecraft] software subsystems shall perform an orderly, controlled system shutdown to a known cyber-safe state upon receipt of a termination command or condition.{SV-MA-3,SV-AV-7}{SI-17} | Graceful shutdown prevents data corruption and incomplete processes. Controlled transitions reduce recovery complexity. Secure shutdown blocks adversary exploitation during failure states. Predictable termination supports resilience. |
| SPR-210 | The [spacecraft] software subsystems shall recover to a known cyber-safe state when an anomaly is detected.{SV-MA-3,SV-AV-7}{SI-17} | Anomaly-triggered containment reduces attacker dwell time. Safe fallback states preserve mission viability. Autonomous response is essential given communication latency. Rapid isolation prevents lateral spread. |
| SPR-211 | The [spacecraft] software subsystems shall safely transition between all predefined, known states.{SV-MA-3,SV-AV-7}{SI-17} | Safe and deterministic state transitions prevent undefined behavior that could be exploited during abnormal or adversarial conditions. Many cyber and fault-based attacks attempt to force systems into unexpected transitional states where validation checks may be bypassed. By ensuring transitions only occur along predefined, verified paths, the spacecraft reduces opportunities for logic corruption or hazardous command execution. Controlled state management strengthens both safety assurance and cybersecurity resilience. |
| SPR-224 | The [spacecraft] protects the availability of resources by allocating resources based on priority and/or quota.{SC-6} | |
| SPR-225 | The [spacecraft] shall protect the availability of resources by allocating [organization]-defined resources based on [priority and/or quota].{SV-AC-6}{SC-6} | In particular, this control is required for all space platform buses to ensure execution of high priority functions; it is particularly important when there are multiple payloads sharing a bus providing communications and other services, where bus resources must be prioritized based on mission. |
| SPR-226 | The [spacecraft] shall implement dynamic isolation and segregation mechanisms for boundary protection to enhance its security by isolating components when necessary (e.g.compromised/malicious payload).{SV-AC-6,SV-MA-3}{SC-7(20)} | Ability to isolate compromised components reduces lateral spread. Dynamic segmentation enhances resilience in active attack scenarios. Isolation supports autonomous containment. Modular protection improves survivability. |
| SPR-229 | The [organization] shall protect documentation and Controlled Unclassified Information (CUI) as required, in accordance with the risk management strategy.{SV-CF-3,SV-SP-4,SV-SP-10}{AC-3,CM-12,CP-2,PM-17,RA-5(4),SA-3,SA-3(1),SA-5,SA-10,SC-8(1),SC-28(3),SI-12} | Documentation may reveal architecture details exploitable by adversaries. Proper handling prevents leakage. Protection of CUI supports regulatory compliance. Information governance complements technical controls. |
| SPR-230 | The [organization] shall identify and properly classify mission sensitive design/operations information and access control shall be applied in accordance with classification guides and applicable federal laws, Executive Orders, directives, policies, regulations, and standards.{SV-CF-3,SV-AV-5}{AC-3,CM-12,CP-2,PM-17,RA-5(4),SA-3,SA-3(1),SA-5,SA-8(19),SC-8(1),SC-28(3),SI-12} | * Mission sensitive information should be classified as Controlled Unclassified Information (CUI) or formally known as Sensitive but Unclassified. Ideally these artifacts would be rated SECRET or higher and stored on classified networks. Mission sensitive information can typically include a wide range of candidate material: the functional and performance specifications, the RF ICDs, databases, scripts, simulation and rehearsal results/reports, descriptions of uplink protection including any disabling/bypass features, failure/anomaly resolution, and any other sensitive information related to architecture, software, and flight/ground /mission operations. This could all need protection at the appropriate level (e.g., unclassified, SBU, classified, etc.) to mitigate levels of cyber intrusions that may be conducted against the project’s networks. Stand-alone systems and/or separate database encryption may be needed with controlled access and on-going Configuration Management to ensure changes in command procedures and critical database areas are tracked, controlled, and fully tested to avoid loss of science or the entire mission. |
| SPR-232 | The [organization] shall conduct a criticality analysis to identify mission critical functions and critical components and reduce the vulnerability of such functions and components through secure system design.{SV-SP-3,SV-SP-4,SV-AV-7,SV-MA-4}{CP-2,CP-2(8),PL-7,PM-11,PM-30(1),RA-3(1),RA-9,SA-8(9),SA-8(11),SA-8(25),SA-12,SA-14,SA-15(3),SC-7(29),SR-1} | During SCRM, criticality analysis will aid in determining supply chain risk. For mission critical functions/components, extra scrutiny must be applied to ensure supply chain is secured. |
| SPR-233 | The [organization] shall identify the applicable physical and environmental protection policies covering the development environment and spacecraft hardware. {SV-SP-4,SV-SP-5,SV-SP-10}{PE-1,PE-14,SA-3,SA-3(1),SA-10(3)} | Development environments must be protected from tampering. Physical controls prevent hardware supply chain compromise. Policy clarity ensures consistent safeguards. Secure development underpins secure deployment. |
| SPR-234 | The [organization] shall develop and document program-specific identification and authentication policies for accessing the development environment and spacecraft. {SV-SP-10,SV-AC-4}{AC-3,AC-14,IA-1,SA-3,SA-3(1)} | Strong authentication prevents unauthorized development access. Development compromise can introduce malicious code. Documented policies ensure consistent enforcement. Identity governance supports supply chain integrity. |
| SPR-235 | The [organization] shall ensure security requirements/configurations are placed in accordance with NIST 800-171 with enhancements in 800-172 on the development environments to prevent the compromise of source code from supply chain or information leakage perspective.{SV-SP-4,SV-SP-10,SV-CF-3}{AC-3,SA-3,SA-3(1),SA-15} | Supply chain threats target development environments. Enhanced controls reduce risk of source code exfiltration. Compliance strengthens contractual and regulatory assurance. Development security directly impacts spacecraft integrity. |
| SPR-236 | The [organization] shall implement a verifiable flaw remediation process into the developmental and operational configuration management process.{SV-SP-1,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{CA-2,CA-5,SA-3,SA-3(1),SA-11,SI-3,SI-3(10)} | The verifiable process should also include a cross reference to mission objectives and impact statements. Understanding the flaws discovered and how they correlate to mission objectives will aid in prioritization. |
| SPR-237 | The [organization] shall establish robust procedures and technical methods to perform testing to include adversarial testing (i.e.abuse cases) of the platform hardware and software.{SV-SP-2,SV-SP-1}{CA-8,CP-4(5),RA-5,RA-5(1),RA-5(2),SA-3,SA-4(3),SA-11,SA-11(1),SA-11(2),SA-11(5),SA-11(7),SA-11(8),SA-15(7)} | Abuse-case testing reveals design weaknesses before deployment. Red-teaming strengthens defensive posture. Proactive validation reduces operational risk. Testing must simulate realistic threat scenarios. |
| SPR-238 | The [organization] shall require subcontractors developing information system components or providing information system services (as appropriate) to demonstrate the use of a system development life cycle that includes [state-of-the-practice system/security engineering methods, software development methods, testing/evaluation/validation techniques, and quality control processes].{SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-9}{SA-3,SA-4(3)} | Select the particular subcontractors, software vendors, and manufacturers based on the criticality analysis performed for the Program Protection Plan and the criticality of the components that they supply. Examples of good security practices would be using defense-in-depth tactics across the board, least-privilege being implemented, two factor authentication everywhere possible, using DevSecOps, implementing and validating adherence to secure coding standards, performing static code analysis, component/origin analysis for open source, fuzzing/dynamic analysis with abuse cases, etc. |
| SPR-244 | The [organization] shall define the secure communication protocols to be used within the mission in accordance with applicable federal laws, Executive Orders, directives, policies, regulations, and standards.{SV-AC-7,SV-CF-1}{PL-7,RA-5(4),SA-4(9),SA-8(18),SA-8(19),SC-8(1),SC-16(3),SC-40(4),SI-12} | Standardized secure protocols reduce interoperability risk. Alignment with federal standards ensures validated cryptography. Defined protocols prevent ad hoc insecure implementations. Governance strengthens communication assurance. |
| SPR-245 | The [organization] shall define processes and procedures to be followed when integrity verification tools detect unauthorized changes to software, firmware, and information.{SV-IT-2}{CM-3,CM-3(1),CM-3(5),CM-5(6),CM-6,CP-2,IR-6,IR-6(2),PM-30,SC-16(1),SC-51,SI-3,SI-4(7),SI-4(24),SI-7,SI-7(7),SI-7(10)} | Predefined response procedures reduce reaction time. Clear escalation paths improve containment. Consistent handling prevents confusion during incidents. Preparedness strengthens resilience. |
| SPR-246 | The [organization] shall ensure that all Electrical, Electronic, Electro-mechanical & Electro-optical (EEEE) and mechanical piece parts procured from the Original Component Manufacturer (OCM) or their authorized distribution network.{SA-8(9),SA-8(11),SA-12,SA-12(1),SC-16(1),SR-1,SR-5} | |
| SPR-285 | The [organization] risk assessment shall include the full end to end communication pathway (i.e., round trip) to include any crosslink communications.{SV-MA-4}{AC-20,AC-20(1),AC-20(3),RA-3,SA-8(18)} | Full pathway analysis prevents overlooking intermediate segments. Crosslinks may introduce lateral risk exposure. Round-trip evaluation strengthens confidentiality and integrity assurance. Holistic view reduces blind spots. |
| SPR-302 | The [organization] shall document the platform's security architecture, and how it is established within and is an integrated part of the overall [organization] mission security architecture.{SV-MA-6,SV-MA-4}{PL-7,SA-8(7),SA-8(13),SA-8(29),SA-8(30),SA-17} | Architecture documentation provides structural clarity. Integration into enterprise mission security ensures alignment. Clear documentation reduces misinterpretation. Transparency strengthens lifecycle governance. |
| SPR-304 | The [organization] shall maintain a list of suppliers and potential suppliers used, and the products that they supply to include software.{SV-SP-3,SV-SP-4,SV-SP-11}{CM-10,PL-8(2),PM-30,SA-8(9),SA-8(11)} | Ideally you have diversification with suppliers |
| SPR-305 | The [organization] shall develop and implement anti-counterfeit policy and procedures designed to detect and prevent counterfeit components from entering the information system, including support tamper resistance and provide a level of protection against the introduction of malicious code or hardware.{SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11}{CM-3(8),CM-7(9),PM-30,SA-8(9),SA-8(11),SA-9,SA-10(3),SA-19,SC-51,SR-4(3),SR-4(4),SR-5(2),SR-11} | Counterfeit hardware may embed malicious implants. Formal policies reduce infiltration risk. Supplier verification strengthens trust. Hardware authenticity is foundational to cybersecurity. |
| SPR-306 | The [organization] shall conduct a supplier review prior to entering into a contractual agreement with a sub [organization] to acquire systems, system components, or system services.{SV-SP-4,SV-SP-6}{PM-30,PM-30(1),RA-3(1),SA-8(9),SA-8(11),SA-9,SA-12(2),SR-5(2),SR-6} | Pre-contract review ensures vendor security posture. Due diligence reduces third-party risk exposure. Structured evaluation strengthens procurement governance. Supplier trust must be verified. |
| SPR-308 | The [organization] shall protect against supply chain threats to the system, system components, or system services by employing security safeguards as defined by NIST SP 800-161 Rev.1.{SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11}{PM-30,RA-3(1),SA-8(9),SA-8(11),SA-12,SI-3,SR-1} | The chosen supply chain safeguards should demonstrably support a comprehensive, defense-in-breadth information security strategy. Safeguards should include protections for both hardware and software. Program should define their critical components (HW & SW) and identify the supply chain protections, approach/posture/process. |
| SPR-309 | The [organization] shall identify the key system components or capabilities that require isolation through physical or logical means.{SV-AC-6}{AC-3,SC-3,SC-7(13),SC-28(3),SC-32,SC-32(1)} | Fault management and security management capabilities would be classified as mission critical and likely need separated. Additionally, capabilities like TT&C, C&DH, GNC might need separated as well. |
| SPR-310 | The [organization] shall use a certified environment to develop, code and test executable software (firmware or bit-stream) that will be programmed into a one-time programmable FPGA or be programmed into non-volatile memory (NVRAM) that the FPGA executes.{SA-8(9),SA-8(11),SA-12,SA-12(1),SC-51,SI-7(10),SR-1,SR-5} | |
| SPR-311 | The [organization] shall ensure that all ASICs designed, developed, manufactured, packaged, and tested by suppliers with a Defense Microelectronics Activity (DMEA) Trust accreditation.{spacecraft-SP-5} {SV-SP-5}{SA-8(9),SA-8(11),SA-12,SA-12(1),SR-1,SR-5} | Trusted microelectronics reduce hardware supply chain risk. DMEA accreditation strengthens assurance. Hardware-level compromise prevention protects mission integrity. Secure fabrication underpins secure systems. |
| SPR-323 | The [organization] prohibits the use of binary or machine-executable code from sources with limited or no warranty and without the provision of source code.{CM-7(8),CM-7(8),CM-10(1),SA-8(9),SA-8(11),SA-10(2),SI-3,SR-4(4)} | |
| SPR-357 | The [organization] defines the security safeguards to be employed to protect the availability of system resources.{CP-2(2),SC-6,SI-13,SI-17} | |
| SPR-435 | For FPGA pre-silicon artifacts that are developed, coded, and tested by a developer that is not accredited, the [organization] shall be subjected to a development environment and pre-silicon artifacts risk assessment by [organization]. Based on the results of the risk assessment, the [organization] may need to implement protective measures or other processes to ensure the integrity of the FPGA pre-silicon artifacts.{SV-SP-5}{SA-3,SA-3(1),SA-8(9),SA-8(11),SA-12,SA-12(1),SR-1,SR-5} | DOD-I-5200.44 requires the following: 4.c.2 “Control the quality, configuration, and security of software, firmware, hardware, and systems throughout their lifecycles... Employ protections that manage risk in the supply chain… (e.g., integrated circuits, field-programmable gate arrays (FPGA), printed circuit boards) when they are identifiable (to the supplier) as having a DOD end-use. “ 4.e “In applicable systems, integrated circuit-related products and services shall be procured from a Trusted supplier accredited by the Defense Microelectronics Activity (DMEA) when they are custom-designed, custommanufactured, or tailored for a specific DOD military end use (generally referred to as application-specific integrated circuits (ASIC)). “ 1.g “In coordination with the DOD CIO, the Director, Defense Intelligence Agency (DIA), and the Heads of the DOD Components, develop a strategy for managing risk in the supply chain for integrated circuit-related products and services (e.g., FPGAs, printed circuit boards) that are identifiable to the supplier as specifically created or modified for DOD (e.g., military temperature range, radiation hardened). |
| SPR-436 | The [organization] shall require the developer of the system, system component, or system services to demonstrate the use of a system development life cycle that includes [state-of-the-practice system/security engineering methods, software development methods, testing/evaluation/validation techniques, and quality control processes].{SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-9}{SA-3,SA-4(3)} | Examples of good security practices would be using defense-in-depth tactics across the board, least-privilege being implemented, two factor authentication everywhere possible, using DevSecOps, implementing and validating adherence to secure coding standards, performing static code analysis, component/origin analysis for open source, fuzzing/dynamic analysis with abuse cases, etc. |
| SPR-437 | The [organization] shall enable integrity verification of software and firmware components.{SV-IT-2}{CM-3(5),CM-5(6),CM-10(1),SA-8(9),SA-8(11),SA-8(21),SA-10(1),SI-3,SI-4(24),SI-7,SI-7(10),SI-7(12),SR-4(4)} | * The integrity verification mechanisms may include: ** Stipulating and monitoring logical delivery of products and services, requiring downloading from approved, verification-enhanced sites; ** Encrypting elements (software, software patches, etc.) and supply chain process data in transit (motion) and at rest throughout delivery; ** Requiring suppliers to provide their elements “secure by default”, so that additional configuration is required to make the element insecure; ** Implementing software designs using programming languages and tools that reduce the likelihood of weaknesses; ** Implementing cryptographic hash verification; and ** Establishing performance and sub-element baseline for the system and system elements to help detect unauthorized tampering/modification during repairs/refurbishing. ** Stipulating and monitoring logical delivery of products and services, requiring downloading from approved, verification-enhanced sites; ** Encrypting elements (software, software patches, etc.) and supply chain process data in transit (motion) and at rest throughout delivery; ** Requiring suppliers to provide their elements “secure by default”, so that additional configuration is required to make the element insecure; ** Implementing software designs using programming languages and tools that reduce the likelihood of weaknesses; ** Implementing cryptographic hash verification; and ** Establishing performance and sub-element baseline for the system and system elements to help detect unauthorized tampering/modification during repairs/refurbishing. |
| SPR-438 | Any EEEE or mechanical piece parts that cannot be procured from the OCM or their authorized distribution network shall be approved and the government program office notified to prevent and detect counterfeit and fraudulent parts and materials.{SV-SP-5}{SA-8(9),SA-8(11),SA-12,SA-12(1),SR-1,SR-5} | The Program, working with the contractors, shall identify which ASICs/FPGAs perform or execute an integral part of mission critical functions and if the supplier is accredited “Trusted” by DMEA. If the contractor is not accredited by DMEA, then the Program may apply various of the below ASIC/FPGA assurance requirements to the contractor, and the Program may need to perform a risk assessment of the contractor’s design environment. |
| SPR-439 | For ASICs that are designed, developed, manufactured, packaged, or tested by a supplier that is not DMEA accredited, the ASIC development shall undergo a threat/vulnerability risk assessment. Based on the results of the risk assessment, the [organization] may need to implement protective measures or other processes to ensure the integrity of the ASIC.{SV-SP-5}{SA-8(9),SA-8(11),SA-8(21),SA-12,SA-12(1),SR-1,SR-4(4),SR-5} | DOD-I-5200.44 requires the following: 4.c.2 “Control the quality, configuration, and security of software, firmware, hardware, and systems throughout their lifecycles... Employ protections that manage risk in the supply chain… (e.g., integrated circuits, field-programmable gate arrays (FPGA), printed circuit boards) when they are identifiable (to the supplier) as having a DOD end-use. “ 4.e “In applicable systems, integrated circuit-related products and services shall be procured from a Trusted supplier accredited by the Defense Microelectronics Activity (DMEA) when they are custom-designed, custommanufactured, or tailored for a specific DOD military end use (generally referred to as application-specific integrated circuits (ASIC)). “ 1.g “In coordination with the DOD CIO, the Director, Defense Intelligence Agency (DIA), and the Heads of the DOD Components, develop a strategy for managing risk in the supply chain for integrated circuit-related products and services (e.g., FPGAs, printed circuit boards) that are identifiable to the supplier as specifically created or modified for DOD (e.g., military temperature range, radiation hardened). |
| SPR-455 | The [spacecraft] shall restrict access to flight software executables, cryptographic material, command dictionaries, and [organization]-defined sensitive payload data to the privileged execution domain and shall deny all other access by default.{SV-AC-1,SV-AC-3,SV-IT-3}{AC-3(11),AC-6} | Flight executables and cryptographic materials are high-value targets. Restricting access reduces exploitation pathways. Default deny enforces least privilege. Segmentation enhances resilience. |
| SPR-457 | The [spacecraft] shall verify cryptographic integrity and origin of data at each relay hop before forwarding information between internal components, payloads, crosslinks, and ground.{SV-IT-1,SV-IT-2,SV-AC-3}{CA-3(7),SC-8(1),SC-13,SC-23} | End-to-end security alone is insufficient in multi-hop spacecraft architectures. Verifying integrity and origin at each relay prevents compromised subsystems from forwarding malicious data laterally. Hop-by-hop validation limits propagation of injected commands or payload tampering. This enforces zero-trust principles internally. |
| SPR-458 | The [spacecraft] shall enforce [organization]-defined domain based routing policies that restrict which subsystems may relay information to one another.{SV-AC-6}{CA-3(7),AC-4} | Domain segmentation prevents unrestricted lateral data movement. Restricting which subsystems may relay information reduces cross-domain compromise risk. Routing policy enforcement supports least privilege and mission isolation. Structured boundaries strengthen resilience. |
| SPR-460 | The [spacecraft] shall record transitive forwarding decisions and rejections in cyber relevant audit data for downlink.{SV-DCO-1}{CA-3(7),AU-3,AU-12} | Audit records of forwarding and rejection decisions enable forensic reconstruction. Visibility into routing logic prevents covert channel abuse. Logged rejections demonstrate enforcement of policy. Downlink visibility strengthens ground oversight. |
| SPR-479 | The [organization] shall define, baseline, and maintain the purposing of the space platform and link segment, including intended objectives, authorized capabilities, prohibited functions, and operational constraints, and shall use this baseline to bound requirements, updates, and on-orbit operations.{SV-AC-8,SV-MA-6}{PM-32,PL-8} | Defining authorized and prohibited functions prevents scope creep. Clear purposing bounds updates and operational use. Governance limits misuse potential. Structured baseline supports disciplined operations. |
| SPR-486 | The [spacecraft] shall structure security-relevant software and firmware into cohesive modules that expose only [organization]-approved interfaces and prevent unintended cross-module data or control flow. {SV-AC-6}{SC-3,SC-3(4)} | Cohesive modules reduce unintended coupling. Limited interfaces prevent cross-module exploitation. Clear boundaries strengthen isolation. Structured architecture supports resilience. |
| SPR-487 | The [spacecraft] shall verify during integration that modules providing security functions are isolated from non-security modules and that dependencies are limited to documented interfaces.{SV-AC-6}{SC-3,SC-3(4)} | Integration validation ensures isolation is effective. Limiting dependencies reduces lateral risk. Structured interface enforcement strengthens policy assurance. Verification prevents silent drift. |
| SPR-489 | The [spacecraft] shall host privileged functions, including flight control and cryptographic key management, in physically separate processing domains that have no direct data bus connectivity to non privileged domains. {SV-AC-6,SV-AC-3}{SC-3,SC-32(1),SC-39} | Hardware-level separation prevents software bypass. Isolation protects flight control and key management. Physical boundaries strengthen trust. Segmentation enforces zero-trust architecture. |
| SPR-490 | The [spacecraft] shall ensure cross domain exchanges occur only through [organization] defined, verified guards that enforce format, rate, and content checks.{SV-AC-6,SV-IT-2}{AC-4,SC-7,SC-32(1)} | Verified guards ensure controlled data exchange. Format and rate checks prevent covert channel exploitation. Enforced mediation supports mandatory control. Guarded exchange strengthens isolation. |
| SPR-516 | The [organization] shall define,and the [spacecraft] shall enforce,guardrails for any unauthenticated discovery beacons (if used), limiting content to non‑sensitive signals that cannot enable timing/key inference, preventing state change via those paths, narrowing content in safe mode, and validating behavior in simulators/flatsats.{SV-CF-2,SV-IT-1}{AC-4,AC-14} | Discovery mechanisms can leak sensitive timing or state information. Guardrails restrict beacon content to non-sensitive data. Controlled discovery reduces inference risk. |
| SPR-525 | The [organization] shall enforce least privilege and separation of duties for audit data (distinct roles for viewing, exporting, administering logs), apply heightened protections to sensitive categories (e.g., crypto operations), and provide break‑glass pathways with strong auditing.{SV-AC-4}{AC-6,AU-9,AU-9(5)} | Separation of duties prevents misuse of logs. Break-glass pathways preserve emergency access with oversight. Heightened protections reduce tampering risk. Structured governance strengthens trust. |
| SPR-530 | The [spacecraft] shall enable selected maintenance capabilities only within time‑bounded and mode‑bounded windows, audit enable/disable events, auto‑revert on timeout/reset, and expose enabled/disabled capability state in telemetry.{SV-AC-8,SV-AC-4}{CM-7,CM-7(2),SA-8,SA-8(14),AC-3} | Maintenance capabilities expand risk surface. Time-limited activation reduces abuse window. Telemetry exposure ensures oversight. Auto-revert strengthens containment. |
| SPR-532 | The [spacecraft] shall authenticate inter‑service exchanges (e.g., planning > command stacks, payload summaries > bus) using message‑level MACs/signatures or mutually authenticated channels appropriate to resource limits, and shall verify provenance for code‑driven actions.{SV-IT-1,SV-AC-2}{IA-9,AC-4} | Internal services must not assume implicit trust. Message-level authentication prevents spoofing. Resource-appropriate methods balance cost and assurance. Provenance verification strengthens command chain integrity. |
| SPR-538 | The [spacecraft] shall budget CPU/power/memory for security functions (crypto, logging, verification), implement graceful degradation (e.g., summarize logs, throttle verification) that preserves TT&C and safing, and expose telemetry showing throttling decisions and residual capacity.{SV-AV-1,SV-DCO-1}{PE-9,SA-8(8),SC-6,CP-2} | Security must not starve essential TT&C. Explicit resource budgeting ensures sustained enforcement. Graceful degradation preserves mission priority. Telemetry visibility supports oversight. |
| SPR-539 | The [spacecraft] shall ensure security‑critical functions (command authentication, key handling, secure boot) share minimal infrastructure with noncritical services by using separate processing domains or buses where feasible and strict message filtering across boundaries.{SV-MA-7,SV-SP-9}{SC-3,,AC-4,SA-8(11)} | Isolation reduces compromise propagation. Minimal shared infrastructure limits attack surface. Strict message filtering enforces boundaries. Architectural separation strengthens resilience. |
| SPR-541 | The [spacecraft] shall provide a trusted path for sensitive actions (e.g., key management, image activation) with strengthened authentication/integrity checks, narrow interfaces, and explicit telemetry cues (trusted‑path active, preconditions satisfied); operations shall confirm trusted‑path use before proceeding.{SV-AC-1,SV-SP-9}{SA-8(13),SC-11,SC-12} | Narrow interfaces reduce attack vectors. Explicit trusted-path indicators prevent misuse. Strengthened authentication protects critical operations. Procedural confirmation ensures compliance. |
| SPR-542 | The [spacecraft] shall reserve CPU/memory/link budget for essential TT&C (command authentication, attitude/power control loops, critical telemetry) and preempt/shape payload and nonessential traffic under stress.{SV-AV-1,SV-AC-8}{SC-5,SC-5(2),SC-6,CP-10} | Command authentication and attitude control may take precedence. Traffic shaping prevents payload starvation attacks. Priority enforcement preserves safe operations. Resource governance strengthens availability. |
| SPR-549 | The [spacecraft] shall enforce memory‑protection hardening on flight processors (MPU/MMU isolation of partitions, W^X/no‑execute, stack canaries) and employ ECC with periodic scrubbing for critical memories; partition health and protection status shall be exposed in telemetry.{SV-IT-4,SV-SP-4}{SI-16,SC-39} | MPU/MMU isolation prevents partition compromise. W^X and stack canaries mitigate exploitation. ECC with scrubbing preserves memory integrity. Exposed health telemetry strengthens monitoring. |
| SPR-550 | The [spacecraft] shall provide authenticated, auditable commands to inhibit or narrow subsystems/functions without risking loss of recovery paths, with explicit telemetry confirming resultant state; ground systems shall provide authenticated RF‑transmitter inhibits and rack‑level power controls with audit.{SV-AC-8,SV-MA-7}{PE-10,AC-6,AC-6(5),IA-2} | Controlled inhibit functions enable safe containment. Explicit telemetry confirms resultant state. Ground RF inhibits add physical-layer safety. Auditable containment strengthens operational control. |