| REC-0005 |
Eavesdropping |
Adversaries seek to passively (and sometimes semi-passively) capture mission communications across terrestrial networks and RF/optical links to reconstruct protocols, extract telemetry, and derive operational rhythms. On networks, packet captures, logs, and flow data from ground stations, mission control, and cloud backends can expose service boundaries, authentication patterns, and automation. In the RF domain, wideband recordings, spectrograms, and demodulation of TT&C and payload links, spanning VHF/UHF through S/L/X/Ka and, increasingly, optical, enable identification of modulation/coding, framing, and beacon structures. Even when links are encrypted, metadata such as carrier plans, symbol rates, polarization, and cadence can support traffic analysis, timing attacks, or selective interference. Community capture networks and open repositories amplify the reach of a modest adversary. |
|
REC-0005.01 |
Uplink Intercept Eavesdropping |
Uplink reconnaissance focuses on capturing the command path from ground to spacecraft to learn telecommand framing, authentication fields, timing, and anti-replay behavior. Valuable artifacts include emission designators, symbol rates, polarization sense, Doppler profiles, and any preambles or ranging tones that gate command acceptance. Even if payload and TT&C share spectrum, their authentication postures often differ, knowledge an adversary can exploit. Partial captures, console screenshots, or training recordings reduce the effort needed to build an SDR pipeline that “looks right” on the air. Where missions authenticate without encrypting the uplink, traffic analysis can reveal command cadence and maintenance windows. |
|
REC-0005.02 |
Downlink Intercept |
Downlink collection aims to harvest housekeeping telemetry, event logs, ephemerides, payload data, and operator annotations that reveal system state and procedures. Even when payload content is encrypted, ancillary channels (beacons, health/status, low-rate engineering downlink) can disclose mode transitions, battery and thermal margins, safing events, and next-pass predictions. Community ground networks and public dashboards may inadvertently provide stitched datasets that make trend analysis trivial. Captured framing and coding parameters also help an adversary build testbeds and refine timing for later actions. |
|
REC-0005.03 |
Proximity Operations |
In proximity scenarios, an adversary platform (or co-located payload) attempts to observe emissions and intra-vehicle traffic at close range, RF side-channels, optical/lasercom leakage, and, in extreme cases, electromagnetic emanations consistent with TEMPEST/EMSEC concerns. Physical proximity can expose harmonics, intermodulation products, local oscillators, and bus activity that are undetectable from the ground, enabling reconstruction of timing, command acceptance windows, or even limited protocol content. In hosted-payload or rideshare contexts, a poorly segregated data path may permit passive observation of TT&C gateways, crosslinks, or payload buses. |
| IA-0008 |
Rogue External Entity |
Adversaries obtain a foothold by interacting with the spacecraft from platforms outside the authorized ground architecture. A “rogue external entity” is any actor-controlled transmitter or node, ground, maritime, airborne, or space-based, that can radiate or exchange traffic using mission-compatible waveforms, framing, or crosslink protocols. The technique exploits the fact that many vehicles must remain commandable and discoverable over wide areas and across multiple modalities. Using public ephemerides, pass predictions, and knowledge of acquisition procedures, the actor times transmissions to line-of-sight windows, handovers, or maintenance periods. Initial access stems from presenting traffic that the spacecraft will parse or prioritize: syntactically valid telecommands, crafted ranging/acquisition exchanges, crosslink service advertisements, or payload/user-channel messages that bridge into the command/data path. |
|
IA-0008.03 |
ASAT/Counterspace Weapon |
Adversaries leverage counterspace platforms to create conditions under which initial execution becomes possible or to impose effects directly. Electronic warfare systems can jam or spoof links so that the target shifts to contingency channels or accepts crafted navigation/control signals; directed-energy systems can dazzle sensors or upset electronics, shaping mode transitions and autonomy responses; kinetic or contact-capable systems can enable mechanical interaction that exposes maintenance or debug paths. In each case, the counterspace asset is an external actor-controlled node that interacts with the spacecraft outside authorized ground pathways. Initial access may be the immediate result of accepted spoofed traffic, or it may be secondary, arising when the target enters states with broader command acceptance, alternative receivers, or service interfaces that the adversary can then exploit. |
| EX-0016 |
Jamming |
Jamming is an electronic attack that uses radio frequency signals to interfere with communications. A jammer must operate in the same frequency band and within the field of view of the antenna it is targeting. Unlike physical attacks, jamming is completely reversible, once the jammer is disengaged, communications can be restored. Attribution of jamming can be tough because the source can be small and highly mobile, and users operating on the wrong frequency or pointed at the wrong satellite can jam friendly communications.* Similiar to intentional jamming, accidential jamming can cause temporary signal degradation. Accidental jamming refers to unintentional interference with communication signals, and it can potentially impact spacecraft in various ways, depending on the severity, frequency, and duration of the interference.
*https://aerospace.csis.org/aerospace101/counterspace-weapons-101 |
|
EX-0016.01 |
Uplink Jamming |
The attacker transmits toward the spacecraft’s uplink receive antenna, within its main lobe or significant sidelobes, at the operating frequency and sufficient power spectral density to drive the uplink Eb/N₀ below the demodulator’s threshold. Uplink jamming prevents acceptance of telecommands and ranging/acquisition traffic, delaying or blocking scheduled operations. Because the receiver resides on the spacecraft, the jammer must be located within the spacecraft’s receive footprint and match its polarization and Doppler conditions well enough to couple energy into the front end. |
|
EX-0016.02 |
Downlink Jamming |
Downlink jammers target the users of a satellite by creating noise in the same frequency as the downlink signal from the satellite. A downlink jammer only needs to be as powerful as the signal being received on the ground and must be within the field of view of the receiving terminal’s antenna. This limits the number of users that can be affected by a single jammer. Since many ground terminals use directional antennas pointed at the sky, a downlink jammer typically needs to be located above the terminal it is attempting to jam. This limitation can be overcome by employing a downlink jammer on an air or space-based platform, which positions the jammer between the terminal and the satellite. This also allows the jammer to cover a wider area and potentially affect more users. Ground terminals with omnidirectional antennas, such as many GPS receivers, have a wider field of view and thus are more susceptible to downlink jamming from different angles on the ground.*
*https://aerospace.csis.org/aerospace101/counterspace-weapons-101 |
| EX-0017 |
Kinetic Physical Attack |
The adversary inflicts damage by physically striking space assets or their supporting elements, producing irreversible effects that are generally visible to space situational awareness. Kinetic attacks in orbit are commonly grouped into direct-ascent engagements, launched from Earth to intercept a target on a specific pass, and co-orbital engagements, in which an on-orbit vehicle maneuvers to collide with or detonate near the target. Outcomes include structural breakup, loss of attitude control, sensor or antenna destruction, and wholesale mission termination; secondary effects include debris creation whose persistence depends on altitude and geometry. Because launches and on-orbit collisions are measurable, these actions tend to be more attributable and offer near–real-time confirmation of effect compared to non-kinetic methods. |
|
EX-0017.01 |
Direct Ascent ASAT |
A direct-ascent ASAT is often the most commonly thought of threat to space assets. It typically involves a medium- or long-range missile launching from the Earth to damage or destroy a satellite in orbit. This form of attack is often easily attributed due to the missile launch which can be easily detected. Due to the physical nature of the attacks, they are irreversible and provide the attacker with near real-time confirmation of success. Direct-ascent ASATs create orbital debris which can be harmful to other objects in orbit. Lower altitudes allow for more debris to burn up in the atmosphere, while attacks at higher altitudes result in more debris remaining in orbit, potentially damaging other spacecraft in orbit.*
*https://aerospace.csis.org/aerospace101/counterspace-weapons-101 |
|
EX-0017.02 |
Co-Orbital ASAT |
A co-orbital ASAT uses a spacecraft already in space to conduct a deliberate collision or near-field detonation. After insertion, often well before any hostile action, the vehicle performs rendezvous and proximity operations to achieve the desired relative geometry, then closes to impact or triggers a kinetic or explosive device. Guidance relies on relative navigation (optical, lidar, crosslink cues) and precise timing to manage closing speeds and contact angle. Compared with direct-ascent shots, co-orbital approaches can loiter, shadow, or “stalk” a target for extended periods, masking as inspection or servicing until the terminal maneuver. Effects include mechanical disruption, fragmentation, or mission-ending damage, with debris characteristics shaped by the chosen altitude, closing velocity, and collision geometry. |
| EX-0018 |
Non-Kinetic Physical Attack |
The adversary inflicts physical effects on a satellite without mechanical contact, using energy delivered through the environment. Principal modalities are electromagnetic pulse (EMP), high-power laser (optical/thermal effects), and high-power microwave (HPM). These methods can be tuned for reversible disruption (temporary sensor saturation, processor upsets) or irreversible damage (component burnout, optics degradation), and may be executed from ground, airborne, or space platforms given line-of-sight and power/aperture conditions. Forensics are often ambiguous: signatures may resemble environmental phenomena or normal degradations, and confirmation of effect is frequently limited to what the operator observes in telemetry or performance loss. |
|
EX-0018.01 |
Electromagnetic Pulse (EMP) |
An EMP delivers a broadband, high-amplitude electromagnetic transient that couples into spacecraft electronics and harnesses, upsetting or damaging components over wide areas. In space, the archetype is a high-altitude nuclear event whose prompt fields induce immediate upsets and whose secondary radiation environment elevates dose and charging for an extended period along affected orbits. Consequences include widespread single-event effects, latch-ups, permanent degradation of sensitive devices, and accelerated aging of solar arrays and materials. The effect envelope is large and largely indiscriminate: multiple satellites within view can experience simultaneous anomalies consistent with intense electromagnetic stress and enhanced radiation. |
|
EX-0018.02 |
High-Powered Laser |
A high-powered laser can be used to permanently or temporarily damage critical satellite components (i.e. solar arrays or optical centers). If directed toward a satellite’s optical center, the attack is known as blinding or dazzling. Blinding, as the name suggests, causes permanent damage to the optics of a satellite. Dazzling causes temporary loss of sight for the satellite. While there is clear attribution of the location of the laser at the time of the attack, the lasers used in these attacks may be mobile, which can make attribution to a specific actor more difficult because the attacker does not have to be in their own nation, or even continent, to conduct such an attack. Only the satellite operator will know if the attack is successful, meaning the attacker has limited confirmation of success, as an attacked nation may not choose to announce that their satellite has been attacked or left vulnerable for strategic reasons. A high-powered laser attack can also leave the targeted satellite disabled and uncontrollable, which could lead to collateral damage if the satellite begins to drift. A higher-powered laser may permanently damage a satellite by overheating its parts. The parts most susceptible to this are satellite structures, thermal control panels, and solar panels.*
*https://aerospace.csis.org/aerospace101/counterspace-weapons-101 |
|
EX-0018.03 |
High-Powered Microwave |
High-powered microwave (HPM) weapons can be used to disrupt or destroy a satellite’s electronics. A “front-door” HPM attack uses a satellite’s own antennas as an entry path, while a “back-door” attack attempts to enter through small seams or gaps around electrical connections and shielding. A front-door attack is more straightforward to carry out, provided the HPM is positioned within the field of view of the antenna that it is using as a pathway, but it can be thwarted if the satellite uses circuits designed to detect and block surges of energy entering through the antenna. In contrast, a back-door attack is more challenging, because it must exploit design or manufacturing flaws, but it can be conducted from many angles relative to the satellite. Both types of attacks can be either reversible or irreversible; however, the attacker may not be able to control the severity of the damage from the attack. Both front-door and back-door HPM attacks can be difficult to attribute to an attacker, and like a laser weapon, the attacker may not know if the attack has been successful. A HPM attack may leave the target satellite disabled and uncontrollable which can cause it to drift into other satellites, creating further collateral damage.*
*https://aerospace.csis.org/aerospace101/counterspace-weapons-101 |
| DE-0002 |
Disrupt or Deceive Downlink |
Threat actors may target ground-side telemetry reception, processing, or display to disrupt the operator’s visibility into spacecraft health and activity. This may involve denial-based attacks that prevent the spacecraft from transmitting telemetry to the ground (e.g., disabling telemetry links or crashing telemetry software), or more subtle deception-based attacks that manipulate telemetry content to conceal unauthorized actions. Since telemetry is the primary method ground controllers rely on to monitor spacecraft status, any disruption or manipulation can delay or prevent detection of malicious activity, suppress automated or manual mitigations, or degrade trust in telemetry-based decision support systems. |
|
DE-0002.02 |
Jam Link Signal |
Threat actors may overwhelm/jam the downlink signal to prevent transmitted telemetry signals from reaching their destination without severe modification/interference, effectively leaving ground controllers unaware of vehicle activity during this time. Telemetry is the only method in which ground controllers can monitor the health and stability of the spacecraft while in orbit. By disabling this downlink, threat actors may be able to stop mitigations from taking place. |
| EXF-0003 |
Signal Interception |
The adversary captures mission traffic in transit, on ground networks or over the space link, so that payload products, housekeeping, and command/ack exchanges can be reconstructed offline. Vantage points include tapped ground LANs/WANs between MOC and stations, baseband interfaces (IF/IQ), RF/optical receptions within the antenna field of view, and crosslink monitors. Depending on protection, the haul ranges from plaintext frames to encrypted bitstreams whose headers, rates, and schedules still yield valuable context (APIDs, VCIDs, pass timing, file manifest cues). Intercepted sessions can guide later replay, cloning, or targeted downlink requests. |
|
EXF-0003.01 |
Uplink Exfiltration |
Here the target is command traffic from ground to space. By receiving or tapping the uplink path, the adversary collects telecommand frames, ranging/acquisition exchanges, and any file or table uploads. If confidentiality is weak or absent, opcode/argument content, dictionaries, and procedures become directly readable; even when encrypted, session structure, counters, and acceptance timing inform future command-link intrusion or replay. Captured material can reveal maintenance windows, contingency dictionaries, and authentication schemes that enable subsequent exploitation. |
|
EXF-0003.02 |
Downlink Exfiltration |
The attacker records spacecraft-to-ground traffic, real-time telemetry, recorder playbacks, payload products, and mirrored command sessions, to obtain mission data and health/state information. With sufficient signal quality and protocol knowledge, frames and packets are demodulated and extracted for offline use; where protection exists only on uplink or is inconsistently applied, downlink content may still be in clear. Downlinked command echoes, event logs, and file catalogs can expose internal activities and aid follow-on targeting while the primary objective remains data capture at scale. |