Credential Eviction

Credential Eviction techniques disable or remove compromised credentials from a computer network.

Subclasses ( 3 )

ID	Name
D3-AL	Account Locking
D3-ANCI	Authentication Cache Invalidation
D3-CR	Credential Revoking

ID: D3-CE

Subclasses: D3-AL | D3-ANCI | D3-CR

Artifacts: Credential | User Account

ⓘ

Tactic: Evict

Informational References

https://d3fend.mitre.org/technique/d3f:CredentialEviction/

SPARTA Countermeasures Mapping

ID	Name	Description	NIST Rev5	D3FEND	ISO 27001
CM0035	Protect Authenticators	Authenticators and associated authenticator material, including passwords, secret and private keys, tokens, biometric templates, shared secrets, certificates, and trust-store entries, must be protected against unauthorized modification and, where the material is confidential, unauthorized disclosure throughout their lifecycle. Disclosure of secret authenticator material may enable adversaries to impersonate legitimate users or systems. Unauthorized modification of authenticators, certificates, or trust information can deny access to legitimate entities, substitute adversary-controlled credentials, or corrupt the trust basis of mission authentication mechanisms. Protection must apply to authenticators at rest, in transit, and in use, and must extend to all forms and storage locations, including credential databases, configuration files, embedded device credentials, hardware security tokens, and cryptographic key stores. Authenticator protection is a prerequisite for the effectiveness of any authentication-based access control; an authentication system whose authenticators are unprotected provides no meaningful security regardless of the strength of the underlying authentication protocol.	AC-17(6) \| AC-3(11) \| CM-3(6) \| IA-4(9) \| IA-5 \| IA-5(6) \| PL-8 \| PL-8(1) \| SA-3 \| SA-4(5) \| SA-8 \| SA-8(13) \| SA-8(19) \| SC-16 \| SC-16(1) \| SC-8(1)	D3-CE \| D3-ANCI \| D3-CA \| D3-ACA \| D3-PCA \| D3-CRO \| D3-CTS \| D3-SPP \|	A.8.4 \| A.5.16 \| A.5.17 \| A.5.8 \| A.5.2 \| A.5.8 \| A.8.25 \| A.8.31 \| A.8.27 \| A.8.28 \| A.5.33
CM0043	Backdoor Commands	All commands capable of being executed on the spacecraft must be known, documented, and accounted for by the mission and spacecraft owner; the existence of undisclosed or undocumented commands, whether introduced by developers, component suppliers, or subsystem vendors, represents an unacceptable and unmanageable risk to mission integrity. Commands capable of adversely affecting mission success if misused must be identified through deliberate analysis and protected by mission-defined authorization and execution controls commensurate with their consequences. Commands that bypass normal operational safeguards require additional justification and restrictions appropriate to their emergency or contingency purpose. Backdoor, residual, hardware-level, test, diagnostic, or override commands that bypass normal operational pathways or safeguards should be retained only where mission-approved emergency or contingency access requires them. Their inclusion must be explicitly justified, and their commanding authority must be appropriately restricted. Hazardous commands required for normal mission operations are not prohibited by this countermeasure but must be governed by approved authorization, prerequisite, sequencing, and safety controls. Any command capability introduced by a subsystem supplier or component vendor that was not explicitly requested or authorized by the mission owner must be identified, evaluated, and either removed or brought under formal mission command governance before launch.	AC-14 \| CP-2 \| SA-3 \| SA-4(5) \| SA-8 \| SI-10 \| SI-10(3) \| SI-10(6) \| SI-3(8)	D3-OAM \| D3-AM \| D3-PH \| D3-CCSA \| D3-LAM \| D3-CE \|	7.5.1 \| 7.5.2 \| 7.5.3 \| A.5.2 \| A.5.29 \| A.8.1 \| A.5.2 \| A.5.8 \| A.8.25 \| A.8.31 \| A.8.27 \| A.8.28

Related SPARTA Techniques and Sub-Techniques

ID		Name	Description
REC-0003		Gather Spacecraft Communications Information	Threat actors assemble a detailed picture of the mission’s RF and networking posture across TT&C and payload links. Useful elements include frequency bands and allocations, emission designators, modulation/coding, data rates, polarization sense, Doppler profiles, timing and ranging schemes, link budgets, and expected Eb/N0 margins. They also seek antenna characteristics, beacon structures, and whether transponders are bent-pipe or regenerative. On the ground, they track station locations, apertures, auto-track behavior, front-end filters/LNAs, and handover rules, plus whether services traverse SLE, SDN, or commercial cloud backbones. Even small details, polarization sense, roll-off factors, or beacon cadence, shrink the search space for interception, spoofing, or denial. The outcome is a lab-replicable demod/decode chain and a calendar of advantageous windows.
	REC-0003.04	Valid Credentials	Adversaries seek any credential that would let them authenticate as a legitimate actor in space, ground, or supporting cloud networks. Targets include TT&C authentication keys and counters, link-encryption keys, PN codes or spreading sequences, modem and gateway accounts, mission control mission control user and service accounts, station control credentials, VPN and identity-provider tokens, SLE/CSP service credentials, maintenance backdoor accounts, and automation secrets embedded in scripts or CI/CD pipelines. Acquisition paths include spear-phishing, supply-chain compromise, credential reuse across dev/test/ops, logs and core dumps, misconfigured repositories, contractor laptops, and improperly sanitized training data. Because some missions authenticate uplink without encrypting it, possession of valid keys or counters may be sufficient to issue accepted commands from outside official channels.
IA-0003		Crosslink via Compromised Neighbor	Where spacecraft exchange data over inter-satellite links (RF or optical), a compromise on one vehicle can become a bridgehead to others. Threat actors exploit crosslink trust: shared routing, time distribution, service discovery, or gateway functions that forward commands and data between vehicles and ground. With knowledge of crosslink framing, addressing, and authentication semantics, an adversary can craft traffic that appears to originate from a trusted neighbor, injecting control messages, malformed service advertisements, or payload tasking that propagates across the mesh. In tightly coupled constellations, crosslinks may terminate on gateways that also touch the C&DH or payload buses, providing additional pivot opportunities. Because crosslink traffic is expected and often high volume, attacker activity can be timed to blend with synchronization intervals, ranging exchanges, or scheduled data relays.
IA-0007		Compromise Ground System	Compromising the ground segment gives an adversary the most direct path to first execution against a spacecraft. Ground systems encompass operator workstations and mission control mission control software, scheduling/orchestration services, front-end processors and modems, antenna control, key-loading tools and HSMs, data gateways (SLE/CSP), identity providers, and cloud-hosted mission services. Once inside, a threat actor can prepare on-orbit updates, craft and queue valid telecommands, replay captured traffic within acceptance windows, or manipulate authentication material and counters to pass checks. The same foothold enables deep reconnaissance: enumerating mission networks and enclaves, discovering which satellites are operated from a site, mapping logical topology between MOC and stations, identifying in-band “birds” reachable from a given aperture, and learning pass plans, dictionaries, and automation hooks. From there, initial access to the spacecraft is a matter of timing and presentation, injecting commands, procedures, or update packages that align with expected operations so the first execution event appears indistinguishable from normal activity.
	IA-0007.01	Compromise On-Orbit Update	Adversaries may target the pipeline that produces and transmits updates to an on-orbit vehicle. Manipulation points include source repositories and configuration tables, build and packaging steps that generate images or differential patches, staging areas on ground servers, update metadata (versions, counters, manifests), and the transmission process itself. Spacecraft updates span flight software patches, FPGA bitstreams, bootloader or device firmware loads, and operational data products such as command tables, ephemerides, and calibration files, each with distinct formats, framing, and acceptance rules. An attacker positioned in the ground system can substitute or modify an artifact, alter its timing and timetags to match pass windows, and queue it through the same procedures operators use for nominal maintenance. Activation can be immediate or deferred: implants may lie dormant until a specific mode, safing entry, or table index is referenced.
	IA-0007.02	Malicious Commanding via Valid GS	Adversaries may use a compromised, mission-owned ground system to transmit legitimate-looking commands to the target spacecraft. Because the ground equipment is already configured for the mission, correct waveforms, framing, dictionaries, and scheduling, the attacker’s traffic blends with routine operations. Initial access unfolds by inserting commands or procedures into existing timelines, modifying rate/size limits or command queues, or invoking maintenance dictionaries and rapid-response workflows that accept broader command sets. Pre-positioned scripts can chain actions across multiple passes and stations, while telemetry routing provides immediate feedback to refine follow-on steps. Exfiltration can be embedded in standard downlink channels or forwarded through gateways as ordinary mission data. The distinguishing feature is that command origin appears valid, transmitted from approved apertures using expected parameters, so the first execution event is not a protocol anomaly but a misuse of legitimate command authority obtained through the compromised ground system.
IA-0010		Unauthorized Access During Safe-Mode	Adversaries time their first execution to coincide with safe-mode, when the vehicle prioritizes survival and recovery. In many designs, safe-mode reconfigures attitude, reduces payload activity, lowers data rates, and enables contingency dictionaries or maintenance procedures that are dormant in nominal operations. Authentication, rate/size limits, command interlocks, and anti-replay handling may differ; some implementations reset counters, relax timetag screening, accept broader command sets, or activate alternate receivers and beacons to improve commandability. Ground behavior also shifts: extended passes, emergency scheduling, and atypical station use create predictable windows. An attacker who understands these patterns can present syntactically valid traffic that aligns with safe-mode expectations, maintenance loads, recovery scripts, table edits, or reboot/patch sequences, so the first accepted action appears consistent with fault recovery rather than intrusion.
EX-0003		Modify Authentication Process	The adversary alters how the spacecraft validates authority so that future inputs are accepted on their terms. Modifications can target code (patching flight binaries, hot-patching functions in memory, hooking command handlers), data (changing key identifiers, policy tables, or counter initialization), or control flow (short-circuiting MAC checks, widening anti-replay windows, bypassing interlocks on specific opcodes). Common choke points include telecommand verification routines, bootloader or update verifiers, gateway processors that bridge payload and bus traffic, and maintenance dictionaries invoked in special modes. Subtle variants preserve outward behavior, producing normal-looking acknowledgments and counters, while internally accepting a broader set of origins, opcodes, or timetags. Others introduce conditional logic so the backdoor only activates under specific geometry or timing, masking during routine audit. Once resident, the modified process becomes the new trust oracle, enabling recurring execution for the attacker and, in some cases, denying legitimate control by causing authentic inputs to fail verification or to be deprioritized.
EX-0005		Exploit Hardware/Firmware Corruption	The adversary achieves execution or effect beneath the software stack, in device firmware, programmable logic, or the hardware itself, either by corrupting that layer or by driving it through interfaces that function exactly as designed. Examples include tampering with firmware images or configuration blobs burned into non-volatile memory; targeting MCU/SoC boot ROM fallbacks; editing FPGA bitstreams or partial-reconfiguration frames; leveraging physical phenomena and timing to flip bits or skip checks; or issuing legitimate low-level device, maintenance, and calibration commands that act directly on hardware without passing through high-level command mediation. Because these actions occur below or alongside the operating system and application FSW, traditional endpoint safeguards see normal interfaces while trust anchors are already altered.
	EX-0005.02	Malicious Use of Hardware Commands	Threat actors may issue low-level device or maintenance commands that act directly on hardware, bypassing much of the high-level command mediation. These may be memory-mapped register writes forwarded over the bus, vendor-specific instrument/control opcodes, built-in-test and calibration modes, boot-mode or fuse-programming sequences, file/sector operations to on-board non-volatile stores, or actuator primitives for wheels, thrusters, motors, heaters, and RF chains. Because these interfaces exist to configure sensors, zero momentum, switch power domains, tune gains, or adjust clocks, they can also be sequenced to produce harmful effects: over-driving mechanisms, altering persistent calibration, disabling watchdogs, or switching timing sources. Some hardware command sets are only exposed in maintenance or contingency modes, while others are always reachable through gateway processors that translate high-level telecommands into device-level operations. By crafting orders that respect expected framing and rate/size limits, the adversary can induce mechanical, electrical, or logical state changes with immediate, high-privilege impact, all while appearing to exercise legitimate device capabilities.
EX-0006		Disable/Bypass Encryption	The adversary alters how confidentiality or integrity is applied so traffic or data is processed in clear or with weakened protection. Paths include toggling configuration flags that place links or storage into maintenance/test modes; forcing algorithm “fallbacks” or null ciphers; downgrading negotiated suites or keys; manipulating anti-replay/counter state so checks are skipped; substituting crypto libraries or tables during boot/update; and selecting alternate routes that carry the same content without encryption. On some designs, distinct modes handle authentication and confidentiality separately, allowing an actor who obtains authentication material to request unencrypted service or to switch to legacy profiles. The end state is that command, telemetry, or data products traverse a path the spacecraft accepts while cryptographic protection is absent, weakened, or inconsistently applied, enabling subsequent tactics such as inspection, manipulation, or exfiltration.
EX-0011		Exploit Reduced Protections During Safe-Mode	The adversary times on-board actions to the period when the vehicle is in safe-mode and operating with altered guardrails. In many designs, safe-mode enables contingency command dictionaries, activates alternate receivers or antennas, reduces data rates, and prioritizes survival behaviors (sun-pointing, thermal/power conservation). Authentication checks, anti-replay windows, rate/size limits, and interlocks may differ from nominal; counters can be reset, timetag screening relaxed, or maintenance procedures made available for recovery. Ground cadence also changes, longer passes, emergency scheduling, atypical station selection, creating predictable windows for interaction. Using knowledge of these patterns, an attacker issues maintenance-looking loads, recovery scripts, parameter edits, or boot/patch sequences that the spacecraft is primed to accept while safed. Because responses (telemetry beacons, acknowledgments, mode bits) resemble normal anomaly recovery, the first execution event blends with expected behavior, allowing unauthorized reconfiguration, software modification, or state manipulation to occur under the cover of fault response.
PER-0002		Backdoor	A backdoor is a covert access path that bypasses normal authentication, authorization, or operational checks so the attacker can reenter the system on demand. Backdoors may be preexisting (undocumented service modes, maintenance accounts, debug features) or introduced by the adversary during development, integration, or on-orbit updates. Triggers range from “magic” opcodes and timetags to specific geometry/time conditions, counters, or data patterns embedded in routine traffic. The access they provide varies from expanded command sets and relaxed rate/size limits to alternate communications profiles and hidden file/parameter interfaces. Well-crafted backdoors blend with nominal behavior, appearing as ordinary operations while quietly accepting instructions that other paths would reject, thereby sustaining the attacker’s foothold across passes, resets, and operator handovers.
	PER-0002.01	Hardware Backdoor	Hardware backdoors leverage properties of the physical design to provide durable, low-visibility reentry. Examples include enabled test/scan chains, manufacturing or boot-strap modes invoked by pins or registers, persistent debug interfaces (JTAG/SWD/UART), undocumented device commands, and logic inserted in FPGA/ASIC designs that activates under specific stimuli. Because these mechanisms sit below or beside flight software, they can grant direct access to buses, memories, or peripheral control even when higher layers appear healthy. Triggers may be electrical (pin states, voltage/clock sequences), protocol-level (special patterns on an instrument link), or environmental/temporal (particular temperature ranges, timing offsets). Once on orbit, such pathways are difficult to remove or reconfigure, allowing the attacker to persist by reusing the same physical entry points whenever conditions are met.
	PER-0002.02	Software Backdoor	Software backdoors are code paths intentionally crafted or later inserted to provide privileged functionality on cue. In flight contexts, they appear as hidden command handlers, alternate authentication checks, special user/role constructs, or procedure/script hooks that accept nonpublic inputs. They can be embedded in flight applications, separation kernels or drivers, gateway processors that translate bus/payload traffic, or update/loader utilities that handle tables and images. SDR configurations offer another avenue: non-public waveforms, subcarriers, or framing profiles that, when selected, expose a private command channel. Activation is often conditional, specific timetags, geometry, message sequences, or file names, to keep the feature dormant during routine testing and operations. Once present, the backdoor provides a repeatable way to execute commands or modify state without traversing the standard control surfaces, sustaining the adversary’s access over time.
PER-0005		Credentialed Persistence	Threat actors may acquire or leverage valid credentials to maintain persistent access to a spacecraft or its supporting command and control (C2) systems. These credentials may include system service accounts, user accounts, maintenance access credentials, cryptographic keys, or other authentication mechanisms that enable continued entry without triggering access alarms. By operating with legitimate credentials, adversaries can sustain access over extended periods, evade detection, and facilitate follow-on tactics such as command execution, data exfiltration, or lateral movement. Credentialed persistence is particularly effective in environments lacking strong credential lifecycle management, segmentation, or monitoring allowing threat actors to exploit trusted pathways while remaining embedded in mission operations.
DE-0004		Masquerading	The adversary presents themselves as an authorized origin so activity appears legitimate across RF, protocol, and organizational boundaries. Techniques include crafting telecommand frames with correct headers, counters, and dictionaries; imitating station “fingerprints” such as Doppler, polarization, timing, and framing; replaying or emulating crosslink identities; and using insider-derived credentials or roles to operate mission tooling. Masquerading can also target metadata, virtual channel IDs, APIDs, source sequence counts, and facility identifiers, so logs and telemetry attribute actions to expected entities. The effect is that commands, file transfers, or configuration changes are processed as if they came from approved sources, reducing scrutiny and delaying detection.
DE-0005		Subvert Protections via Safe-Mode	The adversary exploits the spacecraft’s recovery posture to bypass controls that are stricter in nominal operations. During safe-mode, vehicles often accept contingency dictionaries, relax rate/size and timetag checks, activate alternate receivers or antennas, and emit reduced or summary telemetry. By timing actions to this state, or deliberately inducing it, the attacker issues maintenance-looking edits, loads, or mode changes that proceed under broadened acceptance while downlink visibility is thinned. Unauthorized activity blends with anomaly response, evading both automated safeguards and operator suspicion.
DE-0011		Credentialed Evasion	Threat actors may leverage valid credentials to conduct unauthorized actions against a spacecraft or related system in a way that conceals their presence and evades detection. By using trusted authentication mechanisms attackers can blend in with legitimate operations and avoid triggering access control alarms or anomaly detection systems. This technique enables evasion by appearing authorized, allowing adversaries to issue commands, access sensitive subsystems, or move laterally within spacecraft or constellation architectures without exploiting software vulnerabilities. When credential use is poorly segmented or monitored, this form of access can be used to maintain stealthy persistence or facilitate other tactics under the guise of legitimate activity.
LM-0003		Constellation Hopping via Crosslink	In networks where vehicles exchange data over inter-satellite links, a compromise on one spacecraft becomes a springboard to others. The attacker crafts crosslink traffic, routing updates, service advertisements, time/ephemeris distribution, file or tasking messages, that appears to originate from a trusted neighbor and targets gateway functions that bridge crosslink traffic into command/data paths. Once accepted, those messages can queue procedures, deliver configuration/table edits, or open file transfer sessions on adjacent vehicles. In mesh or hub-and-spoke constellations, this enables “hop-by-hop” spread: a single foothold uses shared trust and protocol uniformity to reach additional satellites without contacting the ground segment.
LM-0007		Credentialed Traversal	Movement is achieved by reusing legitimate credentials and keys to cross boundaries that rely on trust rather than strict isolation. Using operator or service accounts, maintenance logins, station certificates, or spacecraft-recognized crypto, the adversary invokes gateways that bridge domains, C&DH to payload, crosslink routers to onboard networks, or constellation management planes to individual vehicles. Because the traversal occurs through approved interfaces (file services, table loaders, remote procedure calls, crosslink tasking), actions appear as routine operations while reaching progressively more privileged subsystems or neighboring spacecraft. Where roles and scopes are broad or reused, the same credential opens multiple enclaves, turning authorization itself into the lateral path.
EXF-0007		Compromised Ground System	The adversary resides in mission ground infrastructure and uses its trusted position to siphon data at scale. With access to operator workstations, mission control servers, baseband/modem chains, telemetry processing pipelines, or archive databases, the attacker can mirror real-time streams, scrape recorder playbacks, export payload products, and harvest procedure logs and command histories. Because exfiltration rides normal paths, file staging areas, data distribution services, cloud relays, or cross-site links, it blends with routine dissemination. Compromise of scheduling tools and pass plans also lets the actor time captures to high-value downlinks and automate bulk extraction without touching the spacecraft.
EXF-0008		Compromised Developer Site	By breaching development or integration environments (at the mission owner, contractor, or partner), the adversary gains access to source code, test vectors, telemetry captures, build artifacts, documentation, and configuration data, material that is often more complete than flight archives. Beyond theft of intellectual property, the attacker can embed telemetry taps, extended logging, or data “export” features into test harnesses, simulators, or flight builds so that, once fielded, the system produces extra observables or forwards content to non-mission endpoints. This activity typically occurs pre-launch during software production and ATLO, positioning exfiltration mechanisms to activate later in flight.

Space Threats Mapped

ID		Description
SV-AC-3		Compromised master keys or any encryption key
SV-CF-2		Eavesdropping (RF and proximity)
SV-IT-2		Unauthorized modification or corruption of data
SV-MA-2		Heaters and flow valves of the propulsion subsystem are controlled by electric signals so cyberattacks against these signals could cause propellant lines to freeze, lock valves, waste propellant or even put in de-orbit or unstable spinning
SV-AV-4		Attacking the scheduling table to affect tasking
SV-IT-5		Onboard control procedures (i.e., ATS/RTS) that execute a scripts/sets of commands
SV-MA-3		Attacks on critical software subsystems Attitude Determination and Control (AD&C) subsystem determines and controls the orientation of the satellite. Any cyberattack that could disrupt some portion of the control loop - sensor data, computation of control commands, and receipt of the commands would impact operations Telemetry, Tracking and Commanding (TT&C) subsystem provides interface between satellite and ground system. Computations occur within the RF portion of the TT&C subsystem, presenting cyberattack vector Command and Data Handling (C&DH) subsystem is the brains of the satellite. It interfaces with other subsystems, the payload, and the ground. It receives, validate, decodes, and sends commands to other subsystems, and it receives, processes, formats, and routes data for both the ground and onboard computer. C&DH has the most cyber content and is likely the biggest target for cyberattack. Electrical Power Subsystem (EPS) provides, stores, distributes, and controls power on the satellite. An attack on EPS could disrupt, damage, or destroy the satellite.
SV-SP-1		Exploitation of software vulnerabilities (bugs); Unsecure code, logic errors, etc. in the FSW.
SV-SP-3		Introduction of malicious software such as a virus, worm, Distributed Denial-Of-Service (DDOS) agent, keylogger, rootkit, or Trojan Horse
SV-SP-6		Software reuse, COTS dependence, and standardization of onboard systems using building block approach with addition of open-source technology leads to supply chain threat
SV-SP-9		On-orbit software updates/upgrades/patches/direct memory writes. If TT&C is compromised or MOC or even the developer's environment, the risk exists to do a variation of a supply chain attack where after it is in orbit you inject malicious code
SV-AC-5		Proximity operations (i.e., grappling satellite)
SV-AC-6		Three main parts of S/C. CPU, memory, I/O interfaces with parallel and/or serial ports. These are connected via busses (i.e., 1553) and need segregated. Supply chain attack on CPU (FPGA/ASICs), supply chain attack to get malware burned into memory through the development process, and rogue RTs on 1553 bus via hosted payloads are all threats. Security or fault management being disabled by non-mission critical or payload; fault injection or MiTM into the 1553 Bus - China has developed fault injector for 1553 - this could be a hosted payload attack if payload has access to main 1553 bus; One piece of FSW affecting another. Things are not containerized from the OS or FSW perspective;
SV-AC-8		Malicious Use of hardware commands - backdoors / critical commands
SV-AV-2		Satellites base many operations on timing especially since many operations are automated. Cyberattack to disrupt timing/timers could affect the vehicle (Time Jamming / Time Spoofing)
SV-AV-3		Affect the watchdog timer onboard the satellite which could force satellite into some sort of recovery mode/protocol
SV-IT-3		Compromise boot memory
SV-IT-4		Cause bit flip on memory via single event upsets
SV-MA-8		Payload (or other component) is told to constantly sense or emit or run whatever mission it had to the point that it drained the battery constantly / operated in a loop at maximum power until the battery is depleted.
SV-SP-11		Software defined radios - SDR is also another computer, networked to other parts of the spacecraft that could be pivoted to by an attacker and infected with malicious code. Once access to an SDR is gained, the attacker could alter what the SDR thinks is correct frequencies and settings to communicate with the ground.
SV-SP-7		Software can be broken down into three levels (operating system and drivers’ layer, data handling service layer, and the application layer). Highest impact on system is likely the embedded code at the BIOS, kernel/firmware level. Attacking the on-board operating systems. Since it manages all the programs and applications on the computer, it has a critical role in the overall security of the system. Since threats may occur deliberately or due to human error, malicious programs or persons, or existing system vulnerability mitigations must be deployed to protect the OS.
SV-AV-5		Using fault management system against you. Understanding the fault response could be leveraged to get satellite in vulnerable state. Example, safe mode with crypto bypass, orbit correction maneuvers, affecting integrity of TLM to cause action from ground, or some sort of RPO to cause S/C to go into safe mode;
SV-AV-6		Complete compromise or corruption of running state
SV-DCO-1		Not knowing that you were attacked, or attack was attempted
SV-MA-5		Not being able to recover from cyberattack
SV-AC-1		Attempting access to an access-controlled system resulting in unauthorized access
SV-AC-2		Replay of recorded authentic communications traffic at a later time with the hope that the authorized communications will provide data or some other system reaction
SV-CF-1		Tapping of communications links (wireline, RF, network) resulting in loss of confidentiality; Traffic analysis to determine which entities are communicating with each other without being able to read the communicated information
SV-CF-4		Adversary monitors for safe-mode indicators such that they know when satellite is in weakened state and then they launch attack
SV-IT-1		Communications system spoofing resulting in denial of service and loss of availability and data integrity
SV-AC-7		Weak communication protocols. Ones that don't have strong encryption within it
SV-AV-1		Communications system jamming resulting in denial of service and loss of availability and data integrity
SV-MA-7		Exploit ground system and use to maliciously to interact with the spacecraft
SV-AC-4		Masquerading as an authorized entity in order to gain access/Insider Threat
SV-AV-7		The TT&C is the lead contributor to satellite failure over the first 10 years on-orbit, around 20% of the time. The failures due to gyro are around 12% between year one and 6 on-orbit and then ramp up starting around year six and overtake the contributions of the TT&C subsystem to satellite failure. Need to ensure equipment is not counterfeit and the supply chain is sound.
SV-CF-3		Knowledge of target satellite's cyber-related design details would be crucial to inform potential attacker - so threat is leaking of design data which is often stored Unclass or on contractors’ network
SV-MA-4		Not knowing what your crown jewels are and how to protect them now and in the future.
SV-MA-6		Not planning for security on SV or designing in security from the beginning
SV-SP-10		Compromise development environment source code (applicable to development environments not covered by threat SV-SP-1, SV-SP-3, and SV-SP-4).
SV-SP-2		Testing only focuses on functional requirements and rarely considers end to end or abuse cases
SV-SP-4		General supply chain interruption or manipulation
SV-SP-5		Hardware failure (i.e., tainted hardware) {ASIC and FPGA focused}

Sample Requirements

SPARTA ID	Requirement	Rationale/Additional Guidance/Notes
SPR-2	The [spacecraft] shall ensure that sensitive information can only be accessed by personnel with appropriate roles and an explicit need for such information to perform their duties.{SV-CF-3,SV-AC-4}{AC-3(11),CM-12}	Space system sensitive information can include a wide range of candidate material: functional and performance specifications, any ICDs (like radio frequency, ground-to-space, etc.), command and telemetry databases, scripts, simulation and rehearsal results/reports, descriptions of link segment protections subject to disabling/bypassing, failure/anomaly resolution, and any other sensitive information related to architecture, software, and mission operations.
SPR-3	The [spacecraft] shall enforce approved authorizations for controlling the flow of information within the platform and between interconnected systems so that information does not leave the platform boundary unless it is encrypted. Flow control shall be implemented in conjunction with protected processing domains, security‑policy filters with fully enumerated formats, and a default‑deny communications baseline.{SV-AC-6}{AC-3(3),AC-3(4),AC-4,AC-4(2),AC-4(6),AC-4(21),CA-3,CA-3(6),CA-3(7),CA-9,IA-9,SA-8(19),SC-8(1),SC-16(3)}	Spacecraft operate in constrained and deterministic environments where uncontrolled data flows can enable data exfiltration, cross-domain leakage, or lateral movement between subsystems. Enforcing approved authorizations with enumerated formats and a default-deny posture ensures only explicitly permitted communications occur. Encryption enforcement at platform boundaries prevents unauthorized disclosure of telemetry or state information.
SPR-4	The [spacecraft] security implementation shall ensure that information should not be allowed to flow between partitioned applications unless explicitly permitted by the system.{SV-AC-6,SV-MA-3,SV-SP-7}{AC-3(3),AC-3(4),AC-4,AC-4(6),AC-4(21),CA-9,IA-9,SA-8(3),SA-8(18),SA-8(19),SC-2(2),SC-7(29),SC-16,SC-32}	Strict partitioning prevents compromise of one application from cascading into mission-critical subsystems. Many spacecraft attacks exploit flat architectures where subsystems implicitly trust one another. Explicit inter-partition authorization limits lateral movement and privilege escalation. This supports containment and fault isolation under both cyber and fault conditions.
SPR-7	The [organization] shall document and design a security architecture using a defense-in-depth approach that allocates the [organization]s defined safeguards to the indicated locations and layers: [Examples include: operating system abstractions and hardware mechanisms to the separate processors in the platform, internal components, and the FSW].{SV-MA-6}{CA-9,PL-7,PL-8,PL-8(1),SA-8(3),SA-8(4),SA-8(7),SA-8(9),SA-8(11),SA-8(13),SA-8(19),SA-8(29),SA-8(30)}	Spacecraft security cannot rely on a single control; layered defenses reduce the likelihood of catastrophic compromise. Documenting safeguard allocation across hardware, OS, firmware, and FSW ensures coverage across attack surfaces. This supports resiliency against both cyber intrusion and supply chain weaknesses. Clear documentation enables verification and independent assessment.
SPR-8	The [organization] shall ensure that the allocated security safeguards operate in a coordinated and mutually reinforcing manner.{SV-MA-6}{CA-7(5),PL-7,PL-8(1),SA-8(19)}	Independent controls that operate in isolation may create security gaps or conflicting behaviors. Coordinated safeguards ensure that encryption, authentication, partitioning, and monitoring functions reinforce each other rather than undermine availability or safety. This reduces bypass risk and improves fault/cyber response integration. Cohesive operation is essential for resilient mission assurance.
SPR-9	The [organization] shall implement a security architecture and design that provides the required security functionality, allocates security controls among physical and logical components, and integrates individual security functions, mechanisms, and processes together to provide required security capabilities and a unified approach to protection.{SV-MA-6}{PL-7,SA-2,SA-8,SA-8(1),SA-8(2),SA-8(3),SA-8(4),SA-8(5),SA-8(6),SA-8(7),SA-8(9),SA-8(11),SA-8(13),SA-8(19),SA-8(29),SA-8(30),SC-32,SC-32(1)}	Security functionality must be intentionally distributed across physical and logical components rather than bolted on post-design. A unified architecture prevents inconsistent enforcement, duplicated controls, or unprotected interfaces. Integrated design reduces attack surface and improves verification of mission-critical protections.
SPR-10	The [spacecraft] shall protect authenticator content from unauthorized disclosure and modification.{SV-AC-1,SV-AC-3}{AC-17(6),CM-3(6),IA-5,IA-5(6),RA-5(4),SA-8(18),SA-8(19),SC-28(3)}	Authenticators (keys, tokens, counters, certificates) are primary targets for persistent access attacks. Disclosure or modification enables command spoofing, replay, and privilege escalation. Protecting authenticator content preserves command integrity and prevents adversaries from maintaining covert control. Integrity protections must apply both at rest and in use.
SPR-11	The [spacecraft] encryption key handling shall be handled outside of the onboard software and protected using cryptography.{SV-AC-1,SV-AC-3}{AC-17(6),CM-3(6),SA-8(19),SA-9(6),SC-8(1),SC-12,SC-28(1),SC-28(3)}	Key management separated from modifiable flight software reduces exposure to software compromise. If keys are accessible to onboard applications, malicious code could extract or misuse them. Hardware-anchored or externally managed key handling reduces persistence risk. This supports trust-chain assurance and mitigates firmware-level compromise.
SPR-12	The [spacecraft] encryption keys shall be restricted so that the onboard software is not able to access the information for key readout.{SV-AC-1,SV-AC-3}{AC-17(6),CM-3(6),SA-8(19),SA-9(6),SC-8(1),SC-12,SC-28(3)}	Even privileged software must not be able to retrieve plaintext keys. Preventing readout mitigates malware harvesting and insider misuse. Key usage should be mediated through cryptographic modules rather than direct exposure. This enforces least privilege at the cryptographic boundary.
SPR-13	The [spacecraft] encryption keys shall be restricted so that they cannot be read via any telecommands.{SV-AC-1,SV-AC-3}{AC-17(6),CM-3(6),SA-8(19),SA-9(6),SC-8(1),SC-12,SC-28(3)}	Telecommand paths are high-value targets for adversarial exploitation. Allowing keys to be retrieved via command interfaces creates a catastrophic failure mode. This constraint prevents exfiltration even under partial compromise of command processing logic. It ensures encryption protections cannot be remotely dismantled.
SPR-14	The [spacecraft] shall authenticate the ground station (and all commands) and other spacecraft before establishing remote connections using bidirectional authentication that is cryptographically based.{SV-AC-1,SV-AC-2}{AC-3,AC-17,AC-17(2),AC-17(10),AC-18(1),AC-20,IA-3(1),IA-4,IA-4(9),IA-7,IA-9,SA-8(18),SA-8(19),SA-9(2),SC-7(11),SC-16(1),SC-16(2),SC-16(3),SC-23(3),SI-3(9)}	Authorization can include embedding opcodes in command strings, using trusted authentication protocols, identifying proper link characteristics such as emitter location, expected range of receive power, expected modulation, data rates, communication protocols, beamwidth, etc.; and tracking command counter increments against expected values.
SPR-15	The [spacecraft] shall implement cryptographic mechanisms to identify and reject wireless transmissions that are deliberate attempts to achieve imitative or manipulative communications deception based on signal parameters.{SV-AV-1,SV-IT-1}{AC-3,AC-20,SA-8(19),SC-8(1),SC-23(3),SC-40(3),SI-4(13),SI-4(24),SI-4(25),SI-10(6)}	Adversaries may attempt imitative RF signals to inject commands or manipulate spacecraft behavior. Signal parameter validation (modulation, power, timing, waveform characteristics) strengthens command authentication beyond cryptographic validation alone. This helps mitigate spoofing, replay, and rogue emitter attacks. RF-layer validation complements cryptographic controls.
SPR-16	The [spacecraft] shall ensure that processes reusing a shared system resource (e.g., registers, main memory, secondary storage) do not have access to information (including encrypted representations of information) previously stored in that resource after formal release, by clearing or zeroizing the resource prior to reuse.{SV-AC-6}{AC-3,PM-32,SA-8(2),SA-8(5),SA-8(6),SA-8(19),SC-4,SI-3}	Residual data in memory or registers can create covert channels or leakage paths between partitions. Zeroization prevents recovery of sensitive data by subsequent processes. This mitigates cross-domain leakage and memory scraping attacks. Clearing encrypted remnants is equally important to prevent cryptanalytic exploitation.
SPR-17	The [spacecraft] shall protect the confidentiality and integrity of all information at rest using cryptography.{SV-CF-1,SV-CF-2,SV-AC-3}{AC-3,SA-8(19),SC-28,SC-28(1),SI-7(6)}	* The intent as written is for all transmitted traffic to be protected. This includes internal to internal communications and especially outside of the boundary.
SPR-18	The [spacecraft] shall protect the confidentiality and integrity of information during preparation for transmission, transmission, and reception, in accordance with the [organization]‑provided encryption matrix.{SV-AC-7}{AC-3,SA-8(19),SC-8,SC-8(1),SC-8(2),SC-16,SC-16(1),SC-40}	* Preparation for transmission and during reception includes the aggregation, packing, and transformation options performed prior to transmission and the undoing of those operations that occur upon receipt.
SPR-19	The [spacecraft] shall encrypt all telemetry on downlink regardless of operating mode to protect current state of spacecraft.{SV-CF-4}{AC-3(10),RA-5(4),SA-8(18),SA-8(19),SC-8,SC-8(1),SC-13}	Telemetry exposes real-time spacecraft state and configuration. Unencrypted telemetry can reveal vulnerabilities, operational status, or targeting information. Enforcing encryption across all modes prevents intelligence collection and mission state inference. This mitigates passive RF interception threats.
SPR-20	The [spacecraft] shall prevent use of a mode of operations where cryptography on the TT&C link can be disabled; encryption and authentication shall remain enabled even when automated access control mechanisms are overridden.{SV-AC-1,SV-CF-1,SV-CF-2}{AC-3(10),SA-8(18),SA-8(19),SC-16(2),SC-16(3),SC-40,SC-40(4)}	Emergency or override modes often become attack vectors if protections are weakened. Cryptography must remain enforced even during safe-mode or degraded operations. Removing encryption capability creates a single-point catastrophic exposure. Persistent protection ensures no operational shortcut undermines mission assurance.
SPR-21	The [spacecraft], when transferring information between different security domains, shall implement security‑policy filters that require fully enumerated formats that restrict data structure and content.{SV-AC-6}{AC-3(3),AC-3(4),AC-4(14),IA-9,SA-8(19),SC-16,SI-10}	Fully enumerated formats prevent injection of malformed or malicious data across security domains. This reduces parser exploitation, data smuggling, and covert channel abuse. Strict domain filtering supports deterministic and auditable inter-domain communication. Only explicitly defined data structures should be permitted.
SPR-22	The [spacecraft] shall implement boundary protections to separate bus, communications, and payload components supporting their respective functions.{SV-AC-6}{AC-3(3),AC-3(4),CA-9,SA-8(3),SA-8(14),SA-8(18),SA-8(19),SA-17(7),SC-2,SC-2(2),SC-7(13),SC-7(21),SC-7(29),SC-16(3),SC-32,SI-3,SI-4(13),SI-4(25)}	Flat architectures allow compromise of one subsystem to impact all others. Segregated boundaries reduce lateral movement and mission degradation. Isolation ensures payload compromise does not impact TT&C or bus control. This supports containment and survivability.
SPR-23	The [spacecraft] shall isolate mission critical functionality from non-mission critical functionality.{SV-AC-6}{AC-3(3),AC-3(4),CA-9,SA-8(3),SA-8(19),SA-17(7),SC-2,SC-3,SC-3(4),SC-7(13),SC-7(29),SC-32,SC-32(1),SI-3,SI-7(10),SI-7(12)}	Non-critical functions often expand attack surface. Isolation prevents less-trusted components from affecting propulsion, attitude control, or power systems. This reduces cascading failure risk under compromise. Mission-critical systems must maintain operational continuity.
SPR-24	The [spacecraft] data within partitioned applications shall not be read or modified by other applications/partitions.{SV-AC-6}{AC-3(3),AC-3(4),SA-8(19),SC-2(2),SC-4,SC-6,SC-32}	Application partitions must enforce strict read/write controls to prevent unauthorized state modification. Without this control, malicious code can alter mission parameters or falsify telemetry. Isolation protects integrity of subsystem data and prevents corruption propagation.
SPR-25	The [spacecraft] shall prevent unauthorized access to system resources by employing an efficient capability based object model that supports both confinement and revocation of these capabilities when the platform security deems it necessary.{SV-AC-6}{AC-3(8),IA-4(9),PM-32,SA-8(2),SA-8(5),SA-8(6),SA-8(18),SA-8(19),SC-2(2),SC-4,SC-16,SC-32,SI-3}	Capability models restrict access to explicit, revocable tokens of authority. This enforces least privilege and supports dynamic revocation under threat conditions. Confinement reduces damage radius of compromised processes. Revocation capability enables adaptive cyber response.
SPR-26	The [spacecraft] shall use protected processing domains to enforce the policy that information does not leave the platform boundary unless it is encrypted as a basis for flow‑control decisions and shall enumerate permitted inter‑domain flows and enforce domain‑gate checks on any domain switch. {SV-AC-6}{AC-4(2),IA-9,SA-8(19),SC-8(1),SC-16(3)}	Domain gates provide controlled transition points between security domains. Enumerated flows prevent unintentional data leakage and enforce encryption policies at boundaries. This mitigates cross-domain injection and exfiltration. Strong gate enforcement prevents privilege escalation during context switching.
SPR-27	The [spacecraft] shall define the security functions and security-relevant information for which the system must protect from unauthorized access.{SV-MA-4,SV-MA-6}{AC-6(1),SA-8(19),SC-7(13),SC-16}	Clearly identifying security-relevant functions ensures protections are applied to the correct assets. Undefined security boundaries create ambiguity and inconsistent enforcement. Explicit definition supports verification, testing, and threat modeling. This forms the basis for risk-informed control allocation.
SPR-28	The [spacecraft] shall provide the capability to enter the platform into a known good, operational cyber-safe mode from a tamper-resistant, configuration-controlled (“gold”) image that is authenticated as coming from an acceptable supplier, and has its integrity verified. The [spacecraft] shall refresh only from cryptographically authenticated [organization]-approved sources.{SV-AV-5,SV-AV-6,SV-AV-7}{CP-10(6),CP-12,CP-13,IR-4(3),SA-8(16),SA-8(19),SA-8(21),SA-8(24),SI-13,SI-17}	Cyber-safe mode is an operating mode of a spacecraft during which all nonessential systems are shut down and the spacecraft is placed in a known good state using validated software and configuration settings. Within cyber-safe mode authentication and encryption should still be enabled. The spacecraft should be capable of reconstituting firmware and SW functions to preattack levels to allow for the recovery of functional capabilities. This can be performed by self-healing, or the healing can be aided from the ground. However, the spacecraft needs to have the capability to replan, based on available equipment still available after a cyberattack. The goal is for the vehicle to resume full mission operations. If not possible, a reduced level of mission capability should be achieved.
SPR-29	The [spacecraft] shall enter cyber-safe mode software/configuration should be stored onboard the spacecraft in memory with hardware-based controls and should not be modifiable.{CP-10(6),CP-13,SA-8(16),SA-8(19),SA-8(21),SA-8(24),SI-17}
SPR-30	The [spacecraft] shall fail to a known secure state for failures during initialization, and aborts preserving information necessary to return to operations in failure.{SV-AV-5,SV-AV-6,SV-AV-7}{CP-10(6),CP-13,SA-8(16),SA-8(19),SA-8(24),SC-24,SI-13,SI-17}
SPR-31	The [spacecraft] shall fail securely to a secondary device in the event of an operational failure of a primary boundary protection device (i.e., crypto solution).{SV-AC-1,SV-AC-2,SV-CF-1,SV-CF-2}{CP-13,SA-8(19),SA-8(24),SC-7(18),SI-13,SI-13(4)}	If a primary boundary protection device fails, the spacecraft must not revert to insecure operation. Secure failover ensures continuity of confidentiality and integrity protections. This prevents adversaries from inducing failure states to bypass encryption. Redundancy strengthens mission resilience.
SPR-32	The [spacecraft] shall provide or support the capability for recovery and reconstitution to a known state after a disruption, compromise, or failure.{SV-AV-5,SV-AV-6,SV-AV-7}{CP-4(4),CP-10,CP-10(4),CP-10(6),CP-13,IR-4,IR-4(1),SA-8(16),SA-8(19),SA-8(24)}
SPR-33	The [spacecraft] shall utilize TRANSEC. TRANSEC shall be implemented and verified as a distinct layer in coordination with Traffic Flow Security and RF anti‑fingerprinting.{SV-AV-1}{CP-8,RA-5(4),SA-8(18),SA-8(19),SC-8(1),SC-8(4),SC-16,SC-16(1),SC-16(2),SC-16(3),SC-40,SC-40(4)}	Transmission Security (TRANSEC) is used to ensure the availability of transmissions and limit intelligence collection from the transmissions. TRANSEC is secured through burst encoding, frequency hopping, or spread spectrum methods where the required pseudorandom sequence generation is controlled by a cryptographic algorithm and key. Such keys are known as transmission security keys (TSK). The objectives of transmission security are low probability of interception (LPI), low probability of detection (LPD), and antijam which means resistance to jamming (EPM or ECCM).
SPR-34	The [spacecraft] shall recover to a known cyber-safe state when an anomaly is detected.{IR-4,IR-4(1),SA-8(16),SA-8(19),SA-8(21),SA-8(24),SI-3,SI-4(7),SI-10(6),SI-13,SI-17}
SPR-35	The [spacecraft] shall perform an orderly, controlled system shut-down to a known cyber-safe state upon receipt of a termination command or condition.{PE-11,PE-11(1),SA-8(16),SA-8(19),SA-8(24),SI-17}
SPR-36	The [spacecraft] shall operate securely in off-nominal power conditions, including loss of power and spurious power transients.{SV-AV-6,SV-MA-2}{PE-11,PE-11(1),SA-8(16),SA-8(19),SI-13,SI-17}	Power anomalies may induce undefined states exploitable by attackers. Cryptographic and security mechanisms must not degrade into insecure configurations during brownout or transient conditions. This mitigates fault-induced bypass attacks. Resilient operation preserves trust chain continuity.
SPR-37	The [spacecraft] shall protect system components, associated data communications, and communication buses in accordance with: (i) national emissions and TEMPEST policies and procedures, and (ii) the security category or sensitivity of the transmitted information, and shall demonstrate compliance via pre‑launch TEMPEST‑like evaluation for co‑located payload configurations.{SV-CF-2,SV-MA-2}{PE-14,PE-19,PE-19(1),RA-5(4),SA-8(18),SA-8(19),SC-8(1)}	The measures taken to protect against compromising emanations must be in accordance with DODD S-5200.19, or superseding requirements. The concerns addressed by this control during operation are emanations leakage between multiple payloads within a single space platform, and between payloads and the bus.
SPR-38	The [spacecraft] shall be designed so that it protects itself from information leakage due to electromagnetic signals emanations.{SV-CF-2,SV-MA-2}{PE-19,PE-19(1),RA-5(4),SA-8(19)}	This requirement applies if system components are being designed to address EMSEC and the measures taken to protect against compromising emanations must be in accordance with DODD S-5200.19, or superseding requirements.
SPR-39	The [spacecraft] shall prevent unauthorized and unintended information transfer via shared system resources.{SV-AC-6}{PM-32,SA-8(2),SA-8(5),SA-8(6),SA-8(19),SC-2(2),SC-4}	Shared buses, memory, or peripherals can become covert channels. Controls must prevent unintended information propagation across shared infrastructure. This mitigates cross-partition leakage and data exfiltration. Shared resources must not undermine domain isolation.
SPR-40	The [spacecraft] shall only use communication protocols that support encryption within the mission.{SV-AC-7,SV-CF-1,SV-CF-2}{SA-4(9),SA-8(18),SA-8(19),SC-40(4)}	Protocols lacking encryption create unavoidable exposure. Selecting encryption-capable protocols ensures confidentiality and integrity can be enforced mission-wide. This reduces risk from protocol downgrade attacks.
SPR-41	The [spacecraft] shall maintain a separate execution domain for each executing process.{SV-AC-6}{SA-8(14),SA-8(19),SC-2(2),SC-7(21),SC-39,SI-3}	Process isolation prevents one compromised task from impacting others. Separate execution domains mitigate memory corruption and privilege escalation. This strengthens containment of malicious code. Deterministic isolation enhances both safety and cybersecurity.
SPR-42	The [spacecraft] flight software shall not be able to tamper with the security policy or its enforcement mechanisms.{SV-AC-6}{SA-8(16),SA-8(19),SC-3,SC-7(13)}	Security enforcement must be independent of mission application logic. If FSW can alter policy, adversaries can disable protections post-compromise. This control preserves integrity of access controls and monitoring functions. Separation of enforcement from application reduces systemic risk.
SPR-43	The [spacecraft] shall initialize the platform to a known safe state.{SA-8(19),SA-8(23),SA-8(24),SI-17}
SPR-44	The [spacecraft] shall maintain the confidentiality and integrity of information during preparation for transmission and during reception in accordance with [organization] provided encryption matrix.{SV-CF-1,SV-CF-2,SV-IT-2}{SA-8(19),SC-8,SC-8(1),SC-8(2),SC-8(3)}	* Preparation for transmission and during reception includes the aggregation, packing, and transformation options performed prior to transmission and the undoing of those operations that occur upon receipt.
SPR-45	The [spacecraft] shall implement cryptographic mechanisms that achieve protection against the effects of intentional electromagnetic interference; verification evidence for EMI/EPM shall be distinct from EMSEC/TEMPEST, anti‑jam/anti‑spoof protections, and EMP/HANE hardness.{SV-AV-1,SV-IT-1}{SA-8(19),SC-8(1),SC-40,SC-40(1)}	Intentional electromagnetic interference may attempt to induce predictable faults or bypass protections. Cryptographic resilience ensures corrupted transmissions are rejected. Verification must distinguish EMI/EPM resilience from TEMPEST and anti-jam protections. This ensures integrity under hostile RF environments.
SPR-46	The [spacecraft] shall monitor [Program‑defined telemetry points] for malicious commanding attempts and alert ground operators upon detection.{SV-AC-2,SV-IT-1,SV-DCO-1}{AC-17,AC-17(1),AC-17(10),AU-3(1),RA-10,SC-7,SC-16,SC-16(2),SC-16(3),SI-3(8),SI-4,SI-4(1),SI-4(13),SI-4(24),SI-4(25),SI-10(6)}	Telemetry-based detection enables identification of anomalous command patterns, replay attempts, and injection attacks. Early detection allows rapid containment before mission impact escalates. Onboard monitoring is critical when ground latency limits intervention. This supports proactive defense.
SPR-47	The [spacecraft] shall implement relay and replay-resistant authentication mechanisms for establishing a remote connection.{SV-AC-1,SV-AC-2}{AC-3,IA-2(8),IA-2(9),SA-8(18),SC-8(1),SC-16(1),SC-16(2),SC-23(3),SC-40(4)}	Replay attacks can reuse valid command packets to manipulate spacecraft behavior. Freshness checks, nonces, and sequence enforcement prevent reuse of captured transmissions. Relay resistance mitigates man-in-the-middle exploitation. This protects command integrity over RF links.
SPR-48	The [spacecraft] shall implement cryptographic mechanisms to protect the integrity of audit information and audit tools.{SV-DCO-1}{AU-9(3),RA-10,SC-8(1),SI-3,SI-3(10),SI-4(24)}	Audit logs are essential for attribution and forensic analysis. If adversaries can modify audit data, detection and recovery become unreliable. Cryptographic integrity protections preserve evidentiary value.
SPR-49	The [spacecraft] shall implement cryptography for the indicated uses using the indicated protocols, algorithms, and mechanisms, in accordance with CNSSP 12 and applicable federal laws, Executive Orders, directives, policies, regulations, and standards.{IA-7,SC-8(1),SC-13,SI-12}
SPR-50	The [spacecraft] shall implement cryptographic mechanisms to protect the confidentiality and integrity of information during transmission unless otherwise protected by approved physical safeguards.{SV-AC-7}{SC-8,SC-8(1),SC-8(4),SI-7(6)}	Unprotected transmission exposes telemetry, commands, and state information to interception or manipulation. Cryptographic protections ensure authenticity and confidentiality across all communication paths. Physical safeguards alone are insufficient in contested environments.
SPR-54	The [spacecraft] shall retain the capability to update/upgrade operating systems while on-orbit.{SV-SP-7}{SA-4(5),SA-8(8),SA-8(31),SA-10(2),SI-3}	The operating system updates should be performed using multi-factor authorization and should only be performed when risk of compromise/exploitation of identified vulnerability outweighs the risk of not performing the update.
SPR-68	The [spacecraft] shall have on-board intrusion detection/prevention system that monitors the mission critical components or systems.{SV-AC-1,SV-AC-2,SV-MA-4}{RA-10,SC-7,SI-3,SI-3(8),SI-4,SI-4(1),SI-4(7),SI-4(13),SI-4(24),SI-4(25),SI-10(6)}	The mission critical components or systems could be GNC/Attitude Control, C&DH, TT&C, Fault Management.
SPR-74	The [organization] shall define the security safeguards that are to be automatically employed when integrity violations are discovered.{SV-IT-2}{CP-2,SA-8(21),SI-3,SI-4(7),SI-4(12),SI-7(5),SI-7(8)}	Predefined safeguards ensure consistent and timely response to detected integrity violations. Ad hoc response increases uncertainty and recovery time. Automated actions may include isolation, reconstitution from gold images, or transition to cyber-safe mode. Defined response paths improve resilience and reduce operator burden during crisis.
SPR-87	The [spacecraft] shall be configured to provide only essential capabilities.{SV-SP-7,SV-SP-1}{CM-6,CM-7,SA-8(2),SA-8(7),SA-8(13),SA-8(23),SA-8(26),SA-15(5)}	Minimizing enabled functionality reduces attack surface and complexity. Unused services create unnecessary exposure. Essential-only configuration aligns with least functionality principles. This simplifies validation and reduces exploit vectors.
SPR-88	The [spacecraft] shall detect and recover from detected memory errors or transitions to a known cyber-safe state.{SV-IT-4,SV-AV-6}{IR-4,IR-4(1),SA-8(16),SA-8(24),SI-3,SI-4(7),SI-10(6),SI-13,SI-17}	Memory corruption may result from radiation, fault injection, or malicious manipulation. Detection prevents silent data corruption from propagating to mission-critical functions. Recovery mechanisms or safe-state transitions preserve availability. Rapid containment supports mission survivability.
SPR-93	The [spacecraft] shall require multi‑factor authorization for: (a) all spacecraft operating system and application updates; (b) updates to task‑scheduling functionality; and (c) creation or update of onboard stored command sequences.{SV-SP-9,SV-SP-11}{AC-3(2),CM-3(8),CM-5,IA-2,PM-12,SA-8(8),SA-8(31),SA-10(2),SI-3(8),SI-7(12),SI-10(6)}	The intent is for multiple checks to be performed prior to executing these SV SW updates. One action is mere act of uploading the SW to the spacecraft. Another action could be check of digital signature (ideal but not explicitly required) or hash or CRC or a checksum. Crypto boxes provide another level of authentication for all commands, including SW updates but ideally there is another factor outside of crypto to protect against FSW updates. Multi-factor authorization could be the "two-man rule" where procedures are in place to prevent a successful attack by a single actor (note: development activities that are subsequently subject to review or verification activities may already require collaborating attackers such that a "two-man rule" is not appropriate).
SPR-97	All [spacecraft] commands which have unrecoverable consequence must have dual authentication prior to command execution. The [spacecraft] shall verify two independent cryptographic approvals prior to execution and shall generate an audit record binding both approver identifiers to the command identifier, time, and outcome.{SV-AC-4,SV-AC-8,SV-AC-2}{AU-9(5),IA-3,IA-4,IA-10,PE-3,PM-12,SA-8(15),SA-8(21),SC-16(2),SC-16(3),SI-3(8),SI-3(9),SI-4(13),SI-4(25),SI-7(12),SI-10(6),SI-13}	Commands with irreversible impact require heightened assurance to prevent catastrophic mission loss. Dual independent cryptographic approvals mitigate insider threat, key compromise, and single-point credential abuse. Binding approver identifiers to the audit trail strengthens accountability and deterrence. This reduces the probability of unauthorized hazardous command execution.
SPR-98	The [spacecraft] shall have a method to ensure the integrity of which have unrecoverable consequence and validate their authenticity before execution.{SV-AC-2,SV-IT-2,SV-IT-1}{AU-9(5),IA-3,IA-4,IA-10,PE-3,PM-12,SA-8(15),SA-8(21),SC-16(2),SC-16(3),SI-3(8),SI-3(9),SI-4(13),SI-4(25),SI-7(12),SI-10(6),SI-13}	Hazardous commands must be cryptographically protected and validated prior to execution. Integrity and authenticity checks prevent replay, modification, or injection of destructive instructions. Without validation, RF interception or command path compromise could result in mission-ending actions. This ensures critical commands are both authorized and unaltered.
SPR-106	The [spacecraft] shall provide non-identical methods, or functionally independent methods, for commanding a mission critical function when the software is the sole control of that function.{AC-3(2),SI-3(8),SI-13}
SPR-122	The [spacecraft] shall produce, control, and distribute symmetric cryptographic keys using NSA Certified or Approved key management technology and processes per CNSSP 12. Private cryptographic keys shall be generated, stored, and rotated under [organization] control only and shall not be exposed to external service providers.{SV-AC-1,SV-AC-3}{AC-17(6),CM-3(6),SA-9(6),SC-12,SC-12(1),SC-12(2),SC-12(3)}	Centralized and approved key management prevents unauthorized key generation or rotation. Protecting private keys from external service providers reduces supply chain risk. Controlled lifecycle management supports confidentiality and integrity. Strong governance reduces key compromise likelihood.
SPR-128	The [spacecraft] shall accept hazardous commands only when prerequisite checks are satisfied.{SV-AC-8,SV-AV-5}{AC-17(4),SI-10,SI-10(6)}	Precondition validation ensures hazardous commands are executed only under safe system states. This prevents execution under anomalous or compromised conditions. Independent verification reduces false activation risk. Safety and cyber controls must be integrated.
SPR-129	The [spacecraft] shall restrict the use of information inputs to spacecraft and designated ground stations as defined in the applicable ICDs.{SV-AC-1,SV-AC-2}{AC-20,SC-23,SI-10,SI-10(5),SI-10(6)}	Limiting inputs to approved spacecraft and ground stations reduces spoofing and injection risk. ICD-defined boundaries prevent rogue sources from influencing control systems. This constrains trust relationships. Controlled input surfaces reduce attack vectors.
SPR-130	The [spacecraft] shall discriminate between valid and invalid input into the software and rejects invalid input.{SV-SP-1,SV-IT-2}{SC-16(2),SI-3(8),SI-10,SI-10(3),SI-10(6)}	Input validation prevents buffer overflows, injection, and parser exploitation. Rejecting malformed or unexpected data reduces denial-of-service and corruption risks. Deterministic validation improves resilience. Robust input handling is fundamental to secure software.
SPR-131	The [spacecraft] shall identify and reject commands received out-of-sequence when the out-of-sequence commands can cause a hazard/failure or degrade the control of a hazard or mission.{SV-AC-2,SV-AV-4}{SC-16(2),SI-4(13),SI-4(25),SI-10,SI-10(6),SI-13}	Command sequencing enforces operational logic and safety interlocks. Out-of-sequence commands may bypass safeguards. Sequence enforcement prevents replay and control manipulation. This preserves control flow integrity.
SPR-132	The [spacecraft] software subsystems shall accept [Program defined hazardous] commands only when prerequisite checks are satisfied.{SV-MA-3,SV-AV-7}{SI-10}
SPR-133	The [spacecraft] software subsystems shall identify and reject commands received out-of-sequence when the out-of-sequence commands can cause a hazard/failure or degrade the control of a hazard or mission.{SV-MA-3,SV-AV-7}{SI-10}
SPR-134	The [spacecraft] software subsystems shall perform prerequisite checks for the execution of hazardous commands.{SV-MA-3,SV-AV-7}{SI-10}
SPR-135	The [organization] shall ensure that all viable commands are known to the mission and SV "owner.{SV-AC-8}{SI-10,SI-10(3)}	This is a concern for bus re-use. It is possible that the manufacturer left previously coded commands in their syntax rather than starting from a clean slate. This leaves potential backdoors and other functionality the mission does not know about.
SPR-136	The [organization] shall perform analysis of critical (backdoor) commands that could adversely affect mission success if used maliciously.{SV-AC-8}{SI-10,SI-10(3)}	Heritage and commercial products often have many residual operational (e.g., hardware commands) and test capabilities that are unidentified or unknown to the end user, perhaps because they were not expressly stated mission requirements. These would never be tested and their effects unknown, and hence, could be used maliciously. Test commands not needed for flight should be deleted from the flight database.
SPR-137	The [spacecraft] shall only use or include [organization]-defined critical commands for the purpose of providing emergency access where commanding authority is appropriately restricted.{SV-AC-8}{SI-10,SI-10(3)}	The intent is protect against misuse of critical commands. On potential scenario is where you could use accounts with different privileges, could require an additional passphrase or require entry into a different state or append an additional footer to a critical command. There is room for design flexibility here that can still satisfy this requirement.
SPR-138	The [spacecraft] software subsystems shall discriminate between valid and invalid input into the software and rejects invalid input.{SV-MA-3,SV-AV-7}{SI-10,SI-10(3)}
SPR-139	The [spacecraft] software subsystems shall properly handle spurious input and missing data.{SV-MA-3,SV-AV-7}{SI-10,SI-10(3)}
SPR-140	The [spacecraft] shall properly handle spurious input and missing data.{SV-SP-1,SV-AV-6}{SI-10,SI-10(3),SI-10(6)}	Spurious or missing data may indicate attack or fault conditions. Robust handling prevents cascading failures. Defensive programming ensures safe defaults and fallback states. This reduces exploitability of abnormal input conditions.
SPR-141	The [spacecraft] shall perform prerequisite checks for the execution of hazardous commands.{SI-10,SI-10(6),SI-13}
SPR-142	The [spacecraft] shall only use or include critical commands for the purpose of providing emergency access where commanding authority is appropriately restricted.{SI-3(8),SI-10,SI-10(3)}
SPR-143	The [spacecraft] software subsystems shall validate a functionally independent parameter prior to the issuance of any sequence that could remove an inhibit or perform a hazardous action.{SV-MA-3,SV-AV-7}{SI-10(3)}	Independent parameter validation ensures command legitimacy from a secondary data source. This reduces risk of single-variable manipulation. Functional independence increases resilience. Hazardous actions require layered confirmation.
SPR-144	The [spacecraft] shall validate a functionally independent parameter prior to the issuance of any sequence that could remove an inhibit, or perform a hazardous action.{SV-AC-8,SV-MA-3}{SI-10(3),SI-10(6),SI-13}	Redundant validation mechanisms ensure hazardous transitions cannot occur through single-point compromise. Independent parameters strengthen control integrity. This reduces exploit paths for inhibit removal. Critical operations demand dual validation logic.
SPR-227	The [organization] shall identify all locations (including ground and contractor systems) that store or process sensitive system information.{SV-CF-3,SV-SP-4,SV-SP-10}{AC-3(11),CM-12}	Space system sensitive information can include a wide range of candidate material: functional and performance specifications, any ICDs (like radio frequency, ground-to-space, etc.), command and telemetry databases, scripts, simulation and rehearsal results/reports, descriptions of link segment protections subject to disabling/bypassing, failure/anomaly resolution, and any other sensitive information related to architecture, software, and mission operations.
SPR-228	The [organization] shall identify sensitive mission data (e.g.CPI) and document the specific on-board components on which the information is processed and stored.{SV-MA-4,SV-CF-3}{AC-3(11),CM-12}	Space system sensitive information can include a wide range of candidate material: functional and performance specifications, any ICDs (like radio frequency, ground-to-space, etc.), command and telemetry databases, scripts, simulation and rehearsal results/reports, descriptions of link segment protections subject to disabling/bypassing, failure/anomaly resolution, and any other sensitive information related to architecture, software, and mission operations.
SPR-229	The [organization] shall protect documentation and Controlled Unclassified Information (CUI) as required, in accordance with the risk management strategy.{SV-CF-3,SV-SP-4,SV-SP-10}{AC-3,CM-12,CP-2,PM-17,RA-5(4),SA-3,SA-3(1),SA-5,SA-10,SC-8(1),SC-28(3),SI-12}	Documentation may reveal architecture details exploitable by adversaries. Proper handling prevents leakage. Protection of CUI supports regulatory compliance. Information governance complements technical controls.
SPR-230	The [organization] shall identify and properly classify mission sensitive design/operations information and access control shall be applied in accordance with classification guides and applicable federal laws, Executive Orders, directives, policies, regulations, and standards.{SV-CF-3,SV-AV-5}{AC-3,CM-12,CP-2,PM-17,RA-5(4),SA-3,SA-3(1),SA-5,SA-8(19),SC-8(1),SC-28(3),SI-12}	* Mission sensitive information should be classified as Controlled Unclassified Information (CUI) or formally known as Sensitive but Unclassified. Ideally these artifacts would be rated SECRET or higher and stored on classified networks. Mission sensitive information can typically include a wide range of candidate material: the functional and performance specifications, the RF ICDs, databases, scripts, simulation and rehearsal results/reports, descriptions of uplink protection including any disabling/bypass features, failure/anomaly resolution, and any other sensitive information related to architecture, software, and flight/ground /mission operations. This could all need protection at the appropriate level (e.g., unclassified, SBU, classified, etc.) to mitigate levels of cyber intrusions that may be conducted against the project’s networks. Stand-alone systems and/or separate database encryption may be needed with controlled access and on-going Configuration Management to ensure changes in command procedures and critical database areas are tracked, controlled, and fully tested to avoid loss of science or the entire mission.
SPR-231	The [organization] shall distribute documentation to only personnel with defined roles and a need to know.{SV-CF-3,SV-AV-5}{CM-12,CP-2,SA-5,SA-10}	Least privilege and need to know should be employed with the protection of all documentation. Documentation can contain sensitive information that can aid in vulnerability discovery, detection, and exploitation. For example, command dictionaries for ground and space systems should be handles with extreme care. Additionally, design documents for missions contain many key elements that if compromised could aid in an attacker successfully exploiting the system.
SPR-232	The [organization] shall conduct a criticality analysis to identify mission critical functions and critical components and reduce the vulnerability of such functions and components through secure system design.{SV-SP-3,SV-SP-4,SV-AV-7,SV-MA-4}{CP-2,CP-2(8),PL-7,PM-11,PM-30(1),RA-3(1),RA-9,SA-8(9),SA-8(11),SA-8(25),SA-12,SA-14,SA-15(3),SC-7(29),SR-1}	During SCRM, criticality analysis will aid in determining supply chain risk. For mission critical functions/components, extra scrutiny must be applied to ensure supply chain is secured.
SPR-233	The [organization] shall identify the applicable physical and environmental protection policies covering the development environment and spacecraft hardware. {SV-SP-4,SV-SP-5,SV-SP-10}{PE-1,PE-14,SA-3,SA-3(1),SA-10(3)}	Development environments must be protected from tampering. Physical controls prevent hardware supply chain compromise. Policy clarity ensures consistent safeguards. Secure development underpins secure deployment.
SPR-234	The [organization] shall develop and document program-specific identification and authentication policies for accessing the development environment and spacecraft. {SV-SP-10,SV-AC-4}{AC-3,AC-14,IA-1,SA-3,SA-3(1)}	Strong authentication prevents unauthorized development access. Development compromise can introduce malicious code. Documented policies ensure consistent enforcement. Identity governance supports supply chain integrity.
SPR-235	The [organization] shall ensure security requirements/configurations are placed in accordance with NIST 800-171 with enhancements in 800-172 on the development environments to prevent the compromise of source code from supply chain or information leakage perspective.{SV-SP-4,SV-SP-10,SV-CF-3}{AC-3,SA-3,SA-3(1),SA-15}	Supply chain threats target development environments. Enhanced controls reduce risk of source code exfiltration. Compliance strengthens contractual and regulatory assurance. Development security directly impacts spacecraft integrity.
SPR-236	The [organization] shall implement a verifiable flaw remediation process into the developmental and operational configuration management process.{SV-SP-1,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{CA-2,CA-5,SA-3,SA-3(1),SA-11,SI-3,SI-3(10)}	The verifiable process should also include a cross reference to mission objectives and impact statements. Understanding the flaws discovered and how they correlate to mission objectives will aid in prioritization.
SPR-237	The [organization] shall establish robust procedures and technical methods to perform testing to include adversarial testing (i.e.abuse cases) of the platform hardware and software.{SV-SP-2,SV-SP-1}{CA-8,CP-4(5),RA-5,RA-5(1),RA-5(2),SA-3,SA-4(3),SA-11,SA-11(1),SA-11(2),SA-11(5),SA-11(7),SA-11(8),SA-15(7)}	Abuse-case testing reveals design weaknesses before deployment. Red-teaming strengthens defensive posture. Proactive validation reduces operational risk. Testing must simulate realistic threat scenarios.
SPR-238	The [organization] shall require subcontractors developing information system components or providing information system services (as appropriate) to demonstrate the use of a system development life cycle that includes [state-of-the-practice system/security engineering methods, software development methods, testing/evaluation/validation techniques, and quality control processes].{SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-9}{SA-3,SA-4(3)}	Select the particular subcontractors, software vendors, and manufacturers based on the criticality analysis performed for the Program Protection Plan and the criticality of the components that they supply. Examples of good security practices would be using defense-in-depth tactics across the board, least-privilege being implemented, two factor authentication everywhere possible, using DevSecOps, implementing and validating adherence to secure coding standards, performing static code analysis, component/origin analysis for open source, fuzzing/dynamic analysis with abuse cases, etc.
SPR-244	The [organization] shall define the secure communication protocols to be used within the mission in accordance with applicable federal laws, Executive Orders, directives, policies, regulations, and standards.{SV-AC-7,SV-CF-1}{PL-7,RA-5(4),SA-4(9),SA-8(18),SA-8(19),SC-8(1),SC-16(3),SC-40(4),SI-12}	Standardized secure protocols reduce interoperability risk. Alignment with federal standards ensures validated cryptography. Defined protocols prevent ad hoc insecure implementations. Governance strengthens communication assurance.
SPR-245	The [organization] shall define processes and procedures to be followed when integrity verification tools detect unauthorized changes to software, firmware, and information.{SV-IT-2}{CM-3,CM-3(1),CM-3(5),CM-5(6),CM-6,CP-2,IR-6,IR-6(2),PM-30,SC-16(1),SC-51,SI-3,SI-4(7),SI-4(24),SI-7,SI-7(7),SI-7(10)}	Predefined response procedures reduce reaction time. Clear escalation paths improve containment. Consistent handling prevents confusion during incidents. Preparedness strengthens resilience.
SPR-246	The [organization] shall ensure that all Electrical, Electronic, Electro-mechanical & Electro-optical (EEEE) and mechanical piece parts procured from the Original Component Manufacturer (OCM) or their authorized distribution network.{SA-8(9),SA-8(11),SA-12,SA-12(1),SC-16(1),SR-1,SR-5}
SPR-259	The [organization] shall develop an incident response and forensics plan that covers the spacecrafts.{SV-MA-5}{CP-2,IR-1,IR-3,IR-3(2),IR-4(12),IR-4(13),IR-8,SA-15(10),SI-4(24)}	A structured response plan enables coordinated containment and recovery. Forensics planning ensures evidence preservation. Defined procedures reduce confusion during crisis. Incident readiness enhances resilience.
SPR-280	The [organization] shall require the developer of the system, system component, or system service to deliver the system, component, or service with [Program-defined security configurations] implemented.{SV-SP-1,SV-SP-9}{SA-4(5)}	For the spacecraft FSW, the defined security configuration could include to ensure the software does not contain a pre-defined list of Common Weakness Enumerations (CWEs)and/or CAT I/II Application STIGs.
SPR-292	The [organization] shall ensure that role-based security-related training is provided to personnel with assigned security roles and responsibilities: (i) before authorizing access to the system or performing assigned duties; (ii) when required by system changes; and (iii) at least annually thereafter.{SV-AC-4}{AT-3,CP-2}	Personnel must understand role-specific responsibilities. Tailored training reduces misuse. Continuous reinforcement maintains awareness. Human factors are central to defense.
SPR-293	The [organization] shall employ techniques to limit harm from potential adversaries identifying and targeting the [organization]s supply chain.{SV-SP-4,SV-SP-5,SV-SP-6}{CP-2,PM-30,SA-9,SA-12(5),SC-38,SR-3,SR-3(1),SR-3(2),SR-5(2)}	Adversaries often exploit supplier relationships. Protective measures reduce reconnaissance and manipulation. Supply chain resilience strengthens mission integrity. Proactive defense mitigates systemic exposure.
SPR-302	The [organization] shall document the platform's security architecture, and how it is established within and is an integrated part of the overall [organization] mission security architecture.{SV-MA-6,SV-MA-4}{PL-7,SA-8(7),SA-8(13),SA-8(29),SA-8(30),SA-17}	Architecture documentation provides structural clarity. Integration into enterprise mission security ensures alignment. Clear documentation reduces misinterpretation. Transparency strengthens lifecycle governance.
SPR-389	The [organization] shall perform analysis of critical backdoor commands that could adversely affect mission success if used maliciously.{SV-AC-8}{SI-10,SI-10(3)}	Backdoor or maintenance commands may bypass safeguards if misused. Analysis identifies high-impact commands requiring additional controls. Understanding abuse potential reduces catastrophic misuse. Preventive governance strengthens operational assurance.
SPR-390	The [organization] shall ensure that cryptographic mechanisms, including authentication schemes and command dictionaries, are under strict configuration management.{SV-AC-3,SV-IT-2}{CM-3(6)}	Cryptographic algorithms, keys, and command dictionaries are foundational trust elements. Strict configuration control prevents unauthorized changes that could weaken security. Version tracking supports forensic reconstruction. Governance ensures cryptographic integrity across lifecycle phases.
SPR-435	For FPGA pre-silicon artifacts that are developed, coded, and tested by a developer that is not accredited, the [organization] shall be subjected to a development environment and pre-silicon artifacts risk assessment by [organization]. Based on the results of the risk assessment, the [organization] may need to implement protective measures or other processes to ensure the integrity of the FPGA pre-silicon artifacts.{SV-SP-5}{SA-3,SA-3(1),SA-8(9),SA-8(11),SA-12,SA-12(1),SR-1,SR-5}	DOD-I-5200.44 requires the following: 4.c.2 “Control the quality, configuration, and security of software, firmware, hardware, and systems throughout their lifecycles... Employ protections that manage risk in the supply chain… (e.g., integrated circuits, field-programmable gate arrays (FPGA), printed circuit boards) when they are identifiable (to the supplier) as having a DOD end-use. “ 4.e “In applicable systems, integrated circuit-related products and services shall be procured from a Trusted supplier accredited by the Defense Microelectronics Activity (DMEA) when they are custom-designed, custommanufactured, or tailored for a specific DOD military end use (generally referred to as application-specific integrated circuits (ASIC)). “ 1.g “In coordination with the DOD CIO, the Director, Defense Intelligence Agency (DIA), and the Heads of the DOD Components, develop a strategy for managing risk in the supply chain for integrated circuit-related products and services (e.g., FPGAs, printed circuit boards) that are identifiable to the supplier as specifically created or modified for DOD (e.g., military temperature range, radiation hardened).
SPR-436	The [organization] shall require the developer of the system, system component, or system services to demonstrate the use of a system development life cycle that includes [state-of-the-practice system/security engineering methods, software development methods, testing/evaluation/validation techniques, and quality control processes].{SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-9}{SA-3,SA-4(3)}	Examples of good security practices would be using defense-in-depth tactics across the board, least-privilege being implemented, two factor authentication everywhere possible, using DevSecOps, implementing and validating adherence to secure coding standards, performing static code analysis, component/origin analysis for open source, fuzzing/dynamic analysis with abuse cases, etc.
SPR-455	The [spacecraft] shall restrict access to flight software executables, cryptographic material, command dictionaries, and [organization]-defined sensitive payload data to the privileged execution domain and shall deny all other access by default.{SV-AC-1,SV-AC-3,SV-IT-3}{AC-3(11),AC-6}	Flight executables and cryptographic materials are high-value targets. Restricting access reduces exploitation pathways. Default deny enforces least privilege. Segmentation enhances resilience.
SPR-456	The [spacecraft] shall implement OS or hardware enforcement for these restrictions and shall log any attempted access violations.{SV-AC-1,SV-DCO-1}{AC-3,AC-3(11)}	Hardware-enforced policy is harder to bypass than software-only controls. Logging violations supports detection and response. Layered enforcement strengthens assurance. Technical barriers reinforce governance intent.
SPR-457	The [spacecraft] shall verify cryptographic integrity and origin of data at each relay hop before forwarding information between internal components, payloads, crosslinks, and ground.{SV-IT-1,SV-IT-2,SV-AC-3}{CA-3(7),SC-8(1),SC-13,SC-23}	End-to-end security alone is insufficient in multi-hop spacecraft architectures. Verifying integrity and origin at each relay prevents compromised subsystems from forwarding malicious data laterally. Hop-by-hop validation limits propagation of injected commands or payload tampering. This enforces zero-trust principles internally.
SPR-466	The [spacecraft] shall support rapid rollover of communications credentials to restore secure operations with an alternate provider.{SV-AC-3}{SC-12,IA-5}	Credential compromise requires immediate remediation capability. Rapid rollover restores secure communications without prolonged outage. Agility prevents mission interruption. Cryptographic agility is foundational to resilience.
SPR-479	The [organization] shall define, baseline, and maintain the purposing of the space platform and link segment, including intended objectives, authorized capabilities, prohibited functions, and operational constraints, and shall use this baseline to bound requirements, updates, and on-orbit operations.{SV-AC-8,SV-MA-6}{PM-32,PL-8}	Defining authorized and prohibited functions prevents scope creep. Clear purposing bounds updates and operational use. Governance limits misuse potential. Structured baseline supports disciplined operations.
SPR-516	The [organization] shall define,and the [spacecraft] shall enforce,guardrails for any unauthenticated discovery beacons (if used), limiting content to non‑sensitive signals that cannot enable timing/key inference, preventing state change via those paths, narrowing content in safe mode, and validating behavior in simulators/flatsats.{SV-CF-2,SV-IT-1}{AC-4,AC-14}	Discovery mechanisms can leak sensitive timing or state information. Guardrails restrict beacon content to non-sensitive data. Controlled discovery reduces inference risk.
SPR-530	The [spacecraft] shall enable selected maintenance capabilities only within time‑bounded and mode‑bounded windows, audit enable/disable events, auto‑revert on timeout/reset, and expose enabled/disabled capability state in telemetry.{SV-AC-8,SV-AC-4}{CM-7,CM-7(2),SA-8,SA-8(14),AC-3}	Maintenance capabilities expand risk surface. Time-limited activation reduces abuse window. Telemetry exposure ensures oversight. Auto-revert strengthens containment.
SPR-533	The [spacecraft] and [organization] shall adapt identification and authorization based on mission context (e.g., anomaly response, unscheduled contact, safe mode) by tightening factors/keys, narrowing station whitelists, and enforcing geo/time and mode constraints, with telemetry cues and reversion to baseline.{SV-AC-4,SV-AC-1}{IA-1,IA-5,IA-10}	Threat posture varies by mission state. Adaptive controls tighten during anomalies. Telemetry cues ensure transparency. Contextual enforcement supports Zero Trust maturity.
SPR-538	The [spacecraft] shall budget CPU/power/memory for security functions (crypto, logging, verification), implement graceful degradation (e.g., summarize logs, throttle verification) that preserves TT&C and safing, and expose telemetry showing throttling decisions and residual capacity.{SV-AV-1,SV-DCO-1}{PE-9,SA-8(8),SC-6,CP-2}	Security must not starve essential TT&C. Explicit resource budgeting ensures sustained enforcement. Graceful degradation preserves mission priority. Telemetry visibility supports oversight.
SPR-540	The [spacecraft] shall employ deterministic scheduling where feasible and bound retries/timeouts on command/telemetry paths by mode, exposing retry counters, backoff state, and finite‑state transitions in telemetry with consistent error/reject reason codes.{SV-IT-4,SV-AV-1}{SA-8(12),SI-10(3),SI-13}	Determinism prevents runaway retries or timing exploitation. Exposed counters support diagnosis. Finite-state transitions strengthen transparency. Predictable behavior improves assurance.
SPR-541	The [spacecraft] shall provide a trusted path for sensitive actions (e.g., key management, image activation) with strengthened authentication/integrity checks, narrow interfaces, and explicit telemetry cues (trusted‑path active, preconditions satisfied); operations shall confirm trusted‑path use before proceeding.{SV-AC-1,SV-SP-9}{SA-8(13),SC-11,SC-12}	Narrow interfaces reduce attack vectors. Explicit trusted-path indicators prevent misuse. Strengthened authentication protects critical operations. Procedural confirmation ensures compliance.
SPR-544	The [spacecraft] shall close sessions at LOS, invalidate per‑session tokens/nonces, and safely pause queued procedures with no partial side effects, supporting resumable execution at next AOS with explicit telemetry of residual stacks and state.{SV-AC-2}{AC-12,SC-10,IA-5}	Session invalidation prevents replay or token reuse. Safe pausing prevents partial side effects. Resumable logic supports orbital realities. Session discipline strengthens security.