| IA-0003 |
Crosslink via Compromised Neighbor |
Where spacecraft exchange data over inter-satellite links (RF or optical), a compromise on one vehicle can become a bridgehead to others. Threat actors exploit crosslink trust: shared routing, time distribution, service discovery, or gateway functions that forward commands and data between vehicles and ground. With knowledge of crosslink framing, addressing, and authentication semantics, an adversary can craft traffic that appears to originate from a trusted neighbor, injecting control messages, malformed service advertisements, or payload tasking that propagates across the mesh. In tightly coupled constellations, crosslinks may terminate on gateways that also touch the C&DH or payload buses, providing additional pivot opportunities. Because crosslink traffic is expected and often high volume, attacker activity can be timed to blend with synchronization intervals, ranging exchanges, or scheduled data relays. |
| IA-0004 |
Secondary/Backup Communication Channel |
Adversaries pursue alternative paths to the spacecraft that differ from the primary TT&C in configuration, monitoring, or authentication. Examples include backup MOC/ground networks, contingency TT&C chains, maintenance or recovery consoles, low-rate emergency beacons, and secondary receivers or antennas on the vehicle. These channels exist to preserve commandability during outages, safing, or maintenance; they may use different vendors, legacy settings, or simplified procedures. Initial access typically pairs reconnaissance of failover rules with actions that steer operations onto the backup path, natural events, induced denial on the primary, or simple patience until scheduled tests and handovers occur. Once traffic flows over the alternate path, the attacker leverages its distinct procedures, dictionaries, or rate/size limits to introduce commands or data that would be harder to inject on the primary. |
|
IA-0004.01 |
Ground Station |
Threat actors may target the backup ground segment, standby MOC sites, alternate commercial stations, or contingency chains held in reserve. Threat actors establish presence on the backup path (operator accounts, scheduler/orchestration, modem profiles, antenna control) and then exploit moments when operations shift: planned exercises, maintenance at the primary site, weather diversions, or failover during anomalies. They may also shape conditions so traffic is re-routed, e.g., by saturating the primary’s RF front end or consuming its schedules, without revealing their involvement. Once on the backup, prepositioned procedures, macros, or configuration sets allow command injection, manipulation of pass timelines, or quiet collection of downlink telemetry. |
| IA-0007 |
Compromise Ground System |
Compromising the ground segment gives an adversary the most direct path to first execution against a spacecraft. Ground systems encompass operator workstations and mission control mission control software, scheduling/orchestration services, front-end processors and modems, antenna control, key-loading tools and HSMs, data gateways (SLE/CSP), identity providers, and cloud-hosted mission services. Once inside, a threat actor can prepare on-orbit updates, craft and queue valid telecommands, replay captured traffic within acceptance windows, or manipulate authentication material and counters to pass checks. The same foothold enables deep reconnaissance: enumerating mission networks and enclaves, discovering which satellites are operated from a site, mapping logical topology between MOC and stations, identifying in-band “birds” reachable from a given aperture, and learning pass plans, dictionaries, and automation hooks. From there, initial access to the spacecraft is a matter of timing and presentation, injecting commands, procedures, or update packages that align with expected operations so the first execution event appears indistinguishable from normal activity. |
|
IA-0007.01 |
Compromise On-Orbit Update |
Adversaries may target the pipeline that produces and transmits updates to an on-orbit vehicle. Manipulation points include source repositories and configuration tables, build and packaging steps that generate images or differential patches, staging areas on ground servers, update metadata (versions, counters, manifests), and the transmission process itself. Spacecraft updates span flight software patches, FPGA bitstreams, bootloader or device firmware loads, and operational data products such as command tables, ephemerides, and calibration files, each with distinct formats, framing, and acceptance rules. An attacker positioned in the ground system can substitute or modify an artifact, alter its timing and timetags to match pass windows, and queue it through the same procedures operators use for nominal maintenance. Activation can be immediate or deferred: implants may lie dormant until a specific mode, safing entry, or table index is referenced. |
|
IA-0007.02 |
Malicious Commanding via Valid GS |
Adversaries may use a compromised, mission-owned ground system to transmit legitimate-looking commands to the target spacecraft. Because the ground equipment is already configured for the mission, correct waveforms, framing, dictionaries, and scheduling, the attacker’s traffic blends with routine operations. Initial access unfolds by inserting commands or procedures into existing timelines, modifying rate/size limits or command queues, or invoking maintenance dictionaries and rapid-response workflows that accept broader command sets. Pre-positioned scripts can chain actions across multiple passes and stations, while telemetry routing provides immediate feedback to refine follow-on steps. Exfiltration can be embedded in standard downlink channels or forwarded through gateways as ordinary mission data. The distinguishing feature is that command origin appears valid, transmitted from approved apertures using expected parameters, so the first execution event is not a protocol anomaly but a misuse of legitimate command authority obtained through the compromised ground system. |
| IA-0008 |
Rogue External Entity |
Adversaries obtain a foothold by interacting with the spacecraft from platforms outside the authorized ground architecture. A “rogue external entity” is any actor-controlled transmitter or node, ground, maritime, airborne, or space-based, that can radiate or exchange traffic using mission-compatible waveforms, framing, or crosslink protocols. The technique exploits the fact that many vehicles must remain commandable and discoverable over wide areas and across multiple modalities. Using public ephemerides, pass predictions, and knowledge of acquisition procedures, the actor times transmissions to line-of-sight windows, handovers, or maintenance periods. Initial access stems from presenting traffic that the spacecraft will parse or prioritize: syntactically valid telecommands, crafted ranging/acquisition exchanges, crosslink service advertisements, or payload/user-channel messages that bridge into the command/data path. |
|
IA-0008.01 |
Rogue Ground Station |
Adversaries may field their own ground system, transportable or fixed, to transmit and receive mission-compatible signals. A typical setup couples steerable apertures and GPS-disciplined timing with SDR/modems configured for the target’s bands, modulation/coding, framing, and beacon structure. Using pass schedules and Doppler/polarization predictions, the actor crafts over-the-air traffic that appears valid at the RF and protocol layers. |
|
IA-0008.02 |
Rogue Spacecraft |
Adversaries may employ their own satellite or hosted payload to achieve proximity and a privileged RF geometry. After phasing into the appropriate plane or drift orbit, the rogue vehicle operates as a local peer: emitting narrow-beam or crosslink-compatible signals, relaying user-channel traffic that the target will honor, or advertising services that appear to originate from a trusted neighbor. Close range reduces path loss and allows highly selective interactions, e.g., targeted spoofing of acquisition exchanges, presentation of crafted routing/time distribution messages, or injection of payload tasking that rides established inter-satellite protocols. The rogue platform can also perform spectrum and protocol reconnaissance in situ, refining message formats and timing before attempting first execution. |
| IA-0009 |
Trusted Relationship |
Adversaries obtain first execution by riding connections that the mission already trusts, formal interconnections with partners, vendors, and user communities. Once a third party is compromised, the actor inherits that entity’s approved routes into mission enclaves: VPNs and jump hosts into ground networks, API keys into cloud tenants, automated file drops that feed command or update pipelines, and collaboration spaces where procedures and dictionaries circulate. Because traffic, credentials, and artifacts originate from known counterparts, the initial execution event can appear as a routine payload task, scheduled procedure, or software update promoted through established processes. |
|
IA-0009.02 |
Vendor |
Vendors that design, integrate, or support mission systems often hold elevated, persistent routes into operations: remote administration of ground software and modems, access to identity providers and license servers, control of cloud-hosted services, and authority to deliver firmware, bitstreams, or patches. Attackers who compromise a vendor’s enterprise or build environment can assume these roles, issuing commands through approved consoles, queuing updates in provider-operated portals, or invoking maintenance procedures that the mission expects the vendor to perform. Some vendor pathways terminate directly on RF equipment or key-management infrastructure; others ride cross-account cloud roles or managed SaaS backends that handle mission data and scheduling. |
| EX-0001 |
Replay |
Replay is the re-transmission of previously captured traffic, over RF links, crosslinks, or internal buses, to elicit the same processing and effects a second time. Adversaries first observe and record authentic exchanges (telecommands, ranging/acquisition frames, housekeeping telemetry acknowledgments, bus messages), then resend them within acceptance conditions that the system recognizes, matching link geometry, timetags, counters, or mode states. The aim can be functional (re-triggering an action such as a mode change), observational (fingerprinting how the vehicle reacts at different states), or disruptive (saturating queues and bandwidth to crowd out legitimate traffic). Because replays preserve valid syntax and often valid context, they can blend with normal operations, especially during periods with reduced monitoring or when counters and windows reset (e.g., handovers, safing entries). On encrypted links, metadata replays (acquisition beacons, schedule requests) may still yield informative responses. |
|
EX-0001.01 |
Command Packets |
Threat actors may resend authentic-looking telecommands that were previously accepted by the spacecraft. Captures may include whole command PDUs with framing, CRC/MAC, counters, and timetags intact, or they may be reconstructed from operator tooling and procedure logs. When timing, counters, and mode preconditions align, the replayed packet can cause the same effect: toggling relays, initiating safing or recovery scripts, adjusting tables, commanding momentum dumps, or scheduling delta-v events. Even when outright execution fails, repeated “near-miss” injections can map acceptance windows, rate/size limits, and interlocks by observing the spacecraft’s acknowledgments and state changes. At scale, streams of valid-but-stale commands can congest command queues, delay legitimate activity, or trigger nuisance FDIR responses. |
| DE-0004 |
Masquerading |
The adversary presents themselves as an authorized origin so activity appears legitimate across RF, protocol, and organizational boundaries. Techniques include crafting telecommand frames with correct headers, counters, and dictionaries; imitating station “fingerprints” such as Doppler, polarization, timing, and framing; replaying or emulating crosslink identities; and using insider-derived credentials or roles to operate mission tooling. Masquerading can also target metadata, virtual channel IDs, APIDs, source sequence counts, and facility identifiers, so logs and telemetry attribute actions to expected entities. The effect is that commands, file transfers, or configuration changes are processed as if they came from approved sources, reducing scrutiny and delaying detection. |
| LM-0003 |
Constellation Hopping via Crosslink |
In networks where vehicles exchange data over inter-satellite links, a compromise on one spacecraft becomes a springboard to others. The attacker crafts crosslink traffic, routing updates, service advertisements, time/ephemeris distribution, file or tasking messages, that appears to originate from a trusted neighbor and targets gateway functions that bridge crosslink traffic into command/data paths. Once accepted, those messages can queue procedures, deliver configuration/table edits, or open file transfer sessions on adjacent vehicles. In mesh or hub-and-spoke constellations, this enables “hop-by-hop” spread: a single foothold uses shared trust and protocol uniformity to reach additional satellites without contacting the ground segment. |
| EXF-0001 |
Replay |
The adversary re-sends previously valid commands or procedures to cause the spacecraft to transmit data again, then captures the resulting downlink. Typical targets are recorder playbacks, payload product dumps, housekeeping snapshots, or file directory listings. By aligning replays with geometry (e.g., when the satellite is in view of actor-controlled apertures) and with acceptance conditions (counters, timetags, mode), the attacker induces legitimate transmissions that appear routine to operators. Variants include selectively replaying index ranges to fetch only high-value intervals, reissuing subscription/telemetry-rate changes to increase data volume, or queueing playbacks that fire during later passes when interception is feasible. |