System vulnerability assessment relates all the vulnerabilities of a system's components in the context of their configuration and internal dependencies and can also include assessing risk emerging from the system's design as a whole, not just the sum of individual component vulnerabilities.
https://d3fend.mitre.org/technique/d3f:SystemVulnerabilityAssessment/
| ID | Name | Description | NIST Rev5 | D3FEND | ISO 27001 | |
| CM0009 | Threat Intelligence Program | A threat intelligence program enables an organization to systematically collect, analyze, and apply information about adversary capabilities, infrastructure, and intent to inform defensive priorities and drive risk-informed security decisions across the mission lifecycle. For space missions specifically, this may include leveraging available all-source intelligence services or commercial satellite imagery to identify and monitor adversary infrastructure development and acquisition activities that may signal emerging threats to mission assets. Threat intelligence outputs should be operationalized into concrete adjustments to defensive architecture, monitoring priorities, and incident response posture rather than treated as informational products alone. Direct countermeasures against adversary infrastructure identified through this program will fall outside the scope of the mission in the majority of cases; the primary value of the program is in generating actionable awareness that sharpens the organization's own defensive posture. | PM-16 PM-16(1) RA-10 RA-3 RA-3(2) RA-3(3) SA-3 SA-8 SI-4(24) SR-8 | D3-PH D3-AH D3-NM D3-NVA D3-SYSM D3-SYSVA | A.5.7 A.5.7 6.1.2 8.2 9.3.2 A.8.8 A.5.7 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 | |
| CM0022 | Criticality Analysis | Criticality analysis is a structured engineering process that identifies the mission functions, system components, and data flows whose compromise, degradation, or loss would most severely impact mission success, crew safety, or operational continuity. The outputs of this analysis directly drive security investment prioritization: components and functions assessed as most critical receive the most rigorous design-phase protections, supply chain scrutiny, and operational security controls, while lower-criticality elements are protected proportionately. Criticality analysis findings should inform the application of complementary security design principles, including network and functional segmentation and least-privilege access control, to isolate critical components from less-trusted system elements and reduce the consequence of compromise elsewhere in the system. Supply chain protection resources and oversight rigor should be explicitly allocated in proportion to component criticality, ensuring that the most mission-essential hardware and software receive the most intensive sourcing controls, provenance verification, and supplier oversight. Criticality analysis must be initiated early in the system design process and updated as the architecture evolves, threat intelligence changes, or operational experience reveals previously unrecognized dependencies. | CM-4 CP-2 CP-2(8) PL-7 PL-8 PL-8(1) PM-11 PM-17 PM-30 PM-30(1) PM-32 RA-3 RA-3(1) RA-9 SA-11 SA-11(3) SA-15(3) SA-2 SA-3 SA-4(5) SA-4(9) SA-8 SA-8(25) SA-8(3) SA-8(30) SC-32(1) SC-7(29) SR-1 SR-2 SR-2(1) SR-3 SR-3(2) SR-3(3) SR-5(1) SR-7 | D3-AVE D3-OSM D3-IDA D3-SJA D3-AI D3-DI D3-SWI D3-NNI D3-HCI D3-NM D3-PLM D3-AM D3-SYSM D3-SVCDM D3-SYSDM D3-SYSVA D3-OAM D3-ORA | A.8.9 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.5.30 8.1 A.5.8 A.5.8 4.4 6.2 7.5.1 7.5.2 7.5.3 10.2 6.1.2 8.2 9.3.2 A.8.8 A.5.22 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.8.29 A.8.30 5.2 5.3 7.5.1 7.5.2 7.5.3 A.5.1 A.5.2 A.5.4 A.5.19 A.5.31 A.5.36 A.5.37 A.5.19 A.5.20 A.5.21 A.8.30 A.5.20 A.5.21 A.5.22 | |
| CM0074 | Distributed Constellations | A distributed constellation architecture deploys mission capability across multiple spacecraft nodes operating collectively, such that the end user is not dependent on any single satellite to derive the intended capability. This architectural approach directly complicates adversary counterspace planning by multiplying the number of assets that must be successfully degraded or destroyed to achieve mission denial effects equivalent to those achievable against a concentrated, single-node architecture. The resilience benefit depends on how much mission capability remains available following the loss or degradation of specified nodes. A constellation that can satisfy defined minimum mission requirements through multiple combinations of surviving nodes generally requires an adversary to affect more assets or shared dependencies to achieve mission denial. GPS exemplifies this principle: a receiver generally uses signals from at least four healthy satellites with suitable geometry to determine three-dimensional position and time. Loss of one satellite does not ordinarily eliminate the service where sufficient healthy satellites remain visible; resilience to ground-system failures depends separately on the redundancy and distribution of the control segment. Distribution is a mission architecture decision that must be made early in the program lifecycle, as it fundamentally shapes spacecraft design, ground system architecture, launch strategy, and operational concepts. | CP-10(6) CP-11 CP-13 CP-2 CP-2(2) CP-2(3) CP-2(5) CP-2(6) PE-21 | D3-AI D3-NNI D3-SYSM D3-DEM D3-SVCDM D3-SYSVA | 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.8.6 A.5.29 A.5.29 | |
| CM0075 | Proliferated Constellations | Proliferated satellite constellations increase mission resilience by deploying a larger number of functionally equivalent satellites in similar orbits, expanding overall constellation capacity and raising the number of assets an adversary must successfully attack to achieve meaningful mission degradation. Unlike distribution, in which multiple satellites or payloads work together to provide a complete capability, proliferation increases the number of systems performing the same or substantially equivalent mission. Its resilience benefit is primarily derived from additional capacity and reduced dependence on any individual satellite rather than from architectural diversity. Proliferation also supports resilience through on-orbit spare maintenance, in which additional satellites are held in reserve or parked in accessible orbits to replace operational assets without requiring new launches. The cost implications of proliferation are significant and architecture-dependent. Designs optimized for repeatable production may achieve lower unit costs through learning and economies of scale, but those savings depend on design stability, production quantity, supplier capacity, and the amount of non-recurring change between production lots. The choice to proliferate must be made as a mission architecture decision early in the program, as it determines the spacecraft design philosophy, production strategy, launch architecture, and ground system scalability requirements. | CP-10(6) CP-11 CP-13 CP-2 CP-2(2) CP-2(3) CP-2(5) CP-2(6) PE-21 | D3-AI D3-NNI D3-SYSM D3-DEM D3-SVCDM D3-SYSVA | 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.8.6 A.5.29 A.5.29 | |
| CM0076 | Diversified Architectures | A diversified mission architecture provides a capability through multiple systems, platforms, payloads, orbital regimes, or domains to reduce the mission impact of losing any individual element and increase the range of adversary capabilities required to achieve mission denial. Diversification differs from proliferation in that it employs heterogeneous systems, potentially across different orbits, domains, operators, and technologies, rather than deploying more units of the same design. This heterogeneity imposes asymmetric costs on adversaries: attacking systems across different orbital regimes requires different physical and electronic capabilities for each regime, and kinetic attacks on space assets in diverse orbits carry differentiated collateral debris consequences that increase the political and economic cost of a broad attack campaign. Domain diversification, extending mission capability delivery across space, airborne, and terrestrial layers, further reduces adversary incentive by ensuring that defeating the space layer alone does not deny the end user the underlying capability. Diversification can preserve minimum mission capability following the loss of individual elements when the remaining systems provide sufficient coverage, capacity, interoperability, and operational availability to compensate for the loss. | CP-11 CP-13 CP-2 CP-2(2) CP-2(3) CP-2(5) CP-2(6) | D3-AI D3-NNI D3-SYSM D3-DEM D3-SVCDM D3-SYSVA | 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.8.6 A.5.29 A.5.29 | |
| CM0046 | Long Duration Testing | Long duration testing subjects spacecraft software, firmware, hardware, and relevant integrated ground interfaces, or representative simulation and emulation environments, to extended test execution of 30 days or more to expose security and reliability defects that may manifest only after prolonged operation or specific time-dependent conditions. Race conditions, memory or resource leaks, time-dependent state corruption, resource exhaustion, counter rollover, and time-triggered malicious behavior may not manifest during short-duration testing because their activation depends on accumulated runtime, rare timing interactions, or gradual changes in system state. Long duration testing increases the opportunity to expose these conditions before deployment and complements static analysis, formal analysis, stress testing, fault injection, and targeted rollover testing. Testing should use the highest-fidelity environment appropriate to the test objectives. Flight-representative hardware should be used where hardware timing, device behavior, or integration effects are material; validated simulation or emulation may be used for conditions that it represents with sufficient fidelity. Differences between the test environment and operational system must be documented and considered when interpreting results. | PL-8 PL-8(1) SA-3 SA-8 SA-8(30) | D3-SJA D3-PM D3-OSM D3-SDM D3-UBA D3-SYSVA | A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 | |
| CM0051 | Fault Injection Redundancy | Fault injection attacks deliberately induce errors in executing hardware or software, typically by manipulating voltage, clock signals, electromagnetic fields, or radiation, to corrupt computation and extract sensitive information or bypass security controls through observable fault effects. For mission-critical functions that must be protected against fault-based side-channel attacks, particularly cryptographic operations, redundancy-based countermeasures provide a robust detection and mitigation mechanism. The approach executes a protected function through two or more spatially or temporally redundant computations and compares their results. A mismatch indicates a computation fault or implementation discrepancy but does not by itself establish that fault injection occurred. With two results, the system can generally detect disagreement but cannot determine which result is valid. A voter or selection mechanism may provide fault masking only when the number of replicas, independence assumptions, and defined fault model support reliable adjudication; otherwise, the result must be rejected and a mission-approved protective response initiated. Although spacecraft sensor nodes and embedded processors operate under constrained resources, the functions most critical to protect through redundancy are typically cryptographic routines, whose execution footprint is bounded and whose compromise would have disproportionate mission security consequences. | CP-4(5) PL-8 PL-8(1) SA-3 SA-8 SA-8(30) SI-13 SI-4(25) | D3-AH D3-SYSVA D3-ORA | A.5.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 | |
| CM0072 | Protocol Update / Refactoring | Communication and data exchange protocols governing spacecraft, ground system, and inter-system interfaces may contain specification-level vulnerabilities that cannot be resolved through implementation hardening alone, requiring updates to or refactoring of the protocol itself to eliminate the underlying weakness. Protocol vulnerabilities may arise from design flaws in the original specification, from advances in adversarial capability that render previously adequate security assumptions insufficient, or from emerging threats such as quantum computing that threaten the cryptographic primitives upon which protocol security depends. Protocol update or refactoring encompasses the deliberate modification of the rules, formats, and procedures governing system communications to address known vulnerabilities, improve security properties, or maintain adequate protection against the evolving threat environment over the mission's operational lifetime. Because space system protocols are often tightly coupled to hardware interfaces, flight software implementations, and ground system processing pipelines, protocol changes carry significant integration risk and must be managed through rigorous engineering change processes; this complexity makes proactive protocol security assessment and planned update capability more cost-effective than reactive refactoring under operational urgency. | CM-3 CP-11 SI-2 | D3-NM D3-NVA D3-AI D3-AVE D3-SYSM D3-SYSVA D3-OAM D3-ORA D3-PMAD | 8.1 9.3.3 A.8.9 A.8.32 A.5.29 A.6.8 A.8.8 A.8.32 | |
| ID | Name | Description | |
|---|---|---|---|
| REC-0005 | Eavesdropping | Adversaries seek to capture mission communications across terrestrial networks and RF/optical links to reconstruct protocols, extract telemetry, and derive operational rhythms. Collection is most often passive, but may be semi-passive or actively elicited, where the adversary transmits probes or crafted exchanges to provoke identifiable responses from the target rather than waiting to observe them. On networks, packet captures, logs, and flow data from ground stations, mission control, and cloud backends can expose service boundaries, authentication patterns, and automation. In the RF domain, wideband recordings, spectrograms, and demodulation of TT&C and payload links, spanning VHF/UHF through S/L/X/Ka and, increasingly, optical, enable identification of modulation/coding, framing, and beacon structures. Even when links are encrypted, metadata such as carrier plans, symbol rates, polarization, and cadence can support traffic analysis, timing attacks, or selective interference. Community capture networks and open repositories amplify the reach of a modest adversary. | |
| REC-0005.01 | Uplink Intercept Eavesdropping | Uplink reconnaissance focuses on capturing the command path from ground to spacecraft to learn telecommand framing, authentication fields, timing, and anti-replay behavior. Valuable artifacts include emission designators, symbol rates, polarization sense, Doppler profiles, and any preambles or ranging tones that gate command acceptance. Even if payload and TT&C share spectrum, their authentication postures often differ, knowledge an adversary can exploit. Partial captures, console screenshots, or training recordings reduce the effort needed to build an SDR pipeline that “looks right” on the air. Where missions authenticate without encrypting the uplink, traffic analysis can reveal command cadence and maintenance windows. | |
| REC-0005.02 | Downlink Intercept | Downlink collection aims to harvest housekeeping telemetry, event logs, ephemerides, payload data, and operator annotations that reveal system state and procedures. Even when payload content is encrypted, ancillary channels (beacons, health/status, low-rate engineering downlink) can disclose mode transitions, battery and thermal margins, safing events, and next-pass predictions. Community ground networks and public dashboards may inadvertently provide stitched datasets that make trend analysis trivial. Captured framing and coding parameters also help an adversary build testbeds and refine timing for later actions. | |
| REC-0005.03 | Proximity Operations | In proximity scenarios, an adversary platform (or co-located payload) attempts to observe emissions and intra-vehicle traffic at close range, RF side-channels, optical/lasercom leakage, and, in extreme cases, electromagnetic emanations consistent with TEMPEST/EMSEC concerns. Physical proximity can expose harmonics, intermodulation products, local oscillators, and bus activity that are undetectable from the ground, enabling reconstruction of timing, command acceptance windows, or even limited protocol content. In hosted-payload or rideshare contexts, a poorly segregated data path may permit passive observation of TT&C gateways, crosslinks, or payload buses. | |
| RD-0001 | Acquire Infrastructure | Adversaries assemble the people, platforms, and plumbing they will later use to observe, reach, or impersonate mission components. Infrastructure spans RF and optical ground assets (antennas, modems, timing sources, front-ends), compute and storage (on-prem and cloud), network presence (leased ASNs/IP space, VPS fleets, CDN relays), identity fabric (burner accounts, domains, certificates), and fabrication/test environments for hardware and software. They favor assets that are inexpensive, deniable, and geographically diverse, mixing self-hosted gear with commercial services and compromised third-party systems. To support spacecraft operations, they may build SDR-based labs that replicate waveforms and framing, stage command/telemetry tooling behind traffic mixers, and pre-position data pipelines for collection and analysis. The objective is persistence and flexibility: the ability to pivot between reconnaissance, delivery, and command with minimal attribution risk. | |
| RD-0001.01 | Ground Station Equipment | Rather than compromising existing stations, adversaries may acquire or assemble their own RF ground stack. Typical building blocks include: steerable mounts with auto-track, time/frequency standards, band-appropriate antennas and feeds, LNAs and filters at the feed, low-loss IF chains, T/R switching, medium/high-power amplifiers with protection and telemetry, and weather protection. Baseband equipment often mixes SDRs with commercial modems to generate/capture mission waveforms and framing; signal generators and spectrum analyzers support calibration and banner-grabbing. On the digital side, ground data processors translate captured frames to packetized formats for analysis and rehearsal. With this kit, an actor can passively collect, actively probe, or attempt spoofing if link-layer authentication is weak. | |
| RD-0001.02 | Commercial Ground Station Services | Instead of building dishes, adversaries may rent time on commercial ground networks or cloud-integrated “ground-station-as-a-service.” Access can be obtained legitimately (front companies, weak vetting) or via compromised customer accounts, allowing schedule requests, RF front-end configuration, and data egress through reputable providers. The appeal is speed, global reach, and plausible deniability; the risk to defenders is that traffic originates from expected stations and IP ranges. Misuse may include reconnaissance (passive capture), selective denial (misconfiguration or saturation attempts), or, where authentication is weak, unauthorized commanding. | |
| RD-0001.03 | Spacecraft | A well-resourced actor may field their own spacecraft or hosted payload to gain proximity, visibility, or RF leverage. Small satellites can be launched into nearby planes or phasing orbits to observe emissions, perform spectrum measurements, or test spoofing and denial techniques at short range. Hosted payloads on commercial buses provide co-location without full spacecraft development. Proximity also enables on-orbit relay, crosslink probing, or attempts to exploit weak segmentation between payload and bus on rideshares. Regulatory and tracking regimes complicate overt misuse, but shell companies, benign-seeming mission declarations, or flags of convenience can mask intent. | |
| RD-0001.04 | Launch Facility | In practice, adversaries are far more likely to purchase launch services (rideshare slots, hosted-payload opportunities) than to “acquire a launch facility.” Nevertheless, understanding and exploiting launch infrastructure, pads, integration cells, range networks, and control centers, could support resource development (e.g., positioning an asset, staging equipment near range telemetry). The realistic objective is influence over access to orbit, schedule, or integration touchpoints rather than ownership of a pad. Shell entities might book benign-sounding rides, insert dual-use payloads, or seek special handling that relaxes controls. | |
| RD-0002 | Compromise Infrastructure | Rather than purchasing or renting assets, adversaries compromise existing infrastructure, mission-owned, third-party, or shared, to obtain ready-made reach into space, ground, or cloud environments with the benefit of plausible attribution. Targets range from physical RF chains and timing sources to mission control servers, automation/scheduling systems, SLE/CSP gateways, identity providers, and cloud data paths. Initial access often comes via stolen credentials, spear-phishing of operators and vendors, exposed remote-support paths, misconfigured multi-tenant platforms, or lateral movement from enterprise IT into operations enclaves. Once resident, actors can pre-position tools, modify configurations, suppress logging, and impersonate legitimate stations or operators to support later Execution, Exfiltration, or Denial. | |
| RD-0002.03 | 3rd-Party Spacecraft | By compromising another operator’s spacecraft, or a hosted payload, an adversary can gain proximity, sensing, and relay capabilities that are costly to build from scratch and difficult to attribute. With control of an on-orbit asset, the actor may conduct local spectrum measurement and traffic analysis, attempt selective interference or spoofing at short range, or probe crosslinks and gateways where payload networks bridge to buses. In rideshare or hosted-payload contexts, weak segmentation and shared ground paths can provide insight into neighboring missions. More aggressive scenarios include remote proximity operations (RPO) to achieve advantageous geometry; however, physical grappling, docking, or exposure of debug/test interfaces is highly specialized and rare, with significant safety, legal, and tracking implications. Realistic attacker goals emphasize adjacency for RF leverage, covert relay, or data theft rather than mechanical capture. | |
| RD-0003 | Obtain Cyber Capabilities | Adversaries acquire ready-made tools, code, and knowledge so they can move faster and with lower attribution when operations begin. Capabilities span commodity malware and loaders, bespoke implants for mission control mission control and ground enclaves, privilege-escalation and lateral-movement kits, SDR/codec stacks for TT&C and payload links, fuzzers and protocol harnesses, exploit chains for RTOS/middleware and ground services, and databases of configuration playbooks from prior intrusions. Actors prefer modular kits that can be re-skinned (new C2, new certs) and exercised in flatsat or SIL/HIL labs before use. They also collect operational “how-tos”, procedures, scripts, and operator macros, that convert technical access into mission effects. | |
| RD-0003.01 | Exploit/Payload | Threat actors obtain or adapt exploits (the trigger) and payloads (the action after exploitation) for space, ground, and cloud components. Targets include flight software parsers and table loaders, bootloaders and patch/update handlers, bus gateways, payload controllers, and ground services. Payloads may be binaries, scripts, or command/procedure sequences that alter modes, bypass FDIR, or stage follow-on access; they can also be “data payloads” that exploit weak validation (malformed tables, ephemeris, or calibration products). Acquisition paths mirror the broader market, brokered N-day/0-day packages, open-source exploits re-tooled for mission stacks, and theft from vendors or researchers. Actors tune timing, size/rate limits, and anti-replay nuances so delivery fits pass windows and link budgets, and they rehearse on flatsats to achieve deterministic outcomes. | |
| RD-0003.02 | Cryptographic Keys | Adversaries seek any cryptographic material that confers command or decryption authority: uplink authentication/MAC keys and counters, link-encryption/session keys and KEKs, loading/transfer keys for HSMs, PN/spreading codes, modem credentials, and station or crosslink keys. Acquisition routes include compromised ground systems and laptops, misconfigured repositories and ticket systems, memory/core dumps, training datasets and screenshots, contractor support channels, and poorly controlled key-loading or recovery procedures. Because some missions authenticate uplink without encrypting it, possession of the right keys/counters may be sufficient to inject accepted commands outside official channels or to desynchronize anti-replay. | |
| RD-0004 | Stage Capabilities | Before execution, adversaries prepare the ground, literally and figuratively. They upload tooling, exploits, procedures, and datasets to infrastructure they own or have compromised, wire up C2 and telemetry pipelines, and pre-configure RF/baseband chains and protocol stacks to match mission parameters. Staging often uses cloud object stores, VPS fleets, or CI/CD runners masquerading as benign automation; artifacts are containerized or signed with hijacked material to blend in. For RF operations, actors assemble demod/encode flowgraphs, precompute CRC/MAC fields and timetags, and script rate/size pacing to fit pass windows. For ground/cloud, they stage credentials, macros, and schedule templates that can push changes or exfiltrate data quickly during handovers or safing. Dry-runs on flatsats/HIL rigs validate timing and error paths; OPSEC measures (rotating domains, domain fronting, traffic mixers) reduce attribution. | |
| RD-0004.01 | Identify/Select Delivery Mechanism | Adversaries select the pathway that best balances effect, risk, bandwidth, and attribution. Options include over-the-air telecommand injection on TT&C links, manipulation of payload downlinks or user terminals, abuse of crosslinks or gateways, pivoting through commercial ground networks, or pushing malicious updates via supply-chain paths (software, firmware, bitstreams). Selection considers modulation/coding, Doppler and polarization, anti-replay windows, pass geometry, rate/size limits, and expected operator workload (handover, LEOP, safing exits). For ground/cloud paths, actors account for identity boundaries, automation hooks, and change-control cadence. The “delivery mechanism” is end-to-end: RF front-end (antenna, converters, HPAs), baseband/SDR chain, protocol/framing, authentication/counter handling, scheduling, and fallbacks if detection occurs. Rehearsal artifacts, test vectors, mock dictionaries, ephemerides, are built alongside. | |
| RD-0004.02 | Upload Exploit/Payload | Having chosen a path, adversaries pre-position the specific packages and procedures they intend to use: binary exploits, malicious tables and ephemerides, patch images, modem profiles, and operator macros that chain actions. On compromised or leased infrastructure, they stage these items where execution will be fastest, provider portals, scheduler queues, ground station file drops, or automation repos, with triggers tied to pass start, beacon acquisition, or operator shift changes. Artifacts are formatted to mission protocols (framing, CRC/MAC, timetags), chunked to meet rate/size constraints, and signed or wrapped to evade superficial checks. Anti-forensics (timestamp tampering, log suppression, ephemeral storage) reduce audit visibility, while fallback payloads are kept for alternate modes (safe-mode dictionaries, recovery consoles). | |
| RD-0005 | Obtain Non-Cyber Capabilities | Adversaries may pursue non-cyber counterspace means to create access, leverage, or effects that complement cyber operations. These capabilities span kinetic physical (e.g., direct-ascent or co-orbital interceptors and attacks on ground segments), non-kinetic physical (e.g., lasers, high-power microwave/EMP), and electronic warfare (jamming and spoofing). Each class differs in required resources, detectability, attribution, and the permanence of effects, from reversible interference to irreversible destruction. A pragmatic actor mixes methods: electronic attack to mask or distract, directed energy to blind sensors or upset electronics, and, at the top end, kinetic capabilities to hold assets at risk. Resource development may involve acquisition, partnering, or covert access to such systems; rehearsals are often framed as testing or calibration. | |
| RD-0005.01 | Launch Services | Rather than “owning a pad,” a realistic path is purchasing launch services (rideshare, hosted payload) to place inspection or relay assets where they confer RF, optical, or proximity advantage. Launch providers deliver integration, testing, and scheduling; an actor can use benign mission covers to field small satellites that measure local spectrum, perform on-orbit characterization of target emissions, or support later rendezvous and proximity operations. The resource being developed is access to vantage points, not just spaceflight hardware. | |
| RD-0005.02 | Non-Kinetic Physical ASAT | Non-kinetic physical ASATs damage or degrade without contact, typically via directed energy or intense electromagnetic effects. Ground- or space-based lasers can dazzle or blind optical sensors; high-power microwave or related electromagnetic systems can disrupt or permanently damage susceptible electronics; some concepts aim to generate broader electromagnetic effects. These attacks propagate at light speed, can be tuned for reversible or lasting impact, and may leave limited forensic residue, complicating verification and attribution. Actors who obtain or partner for such systems can pair them with cyber operations (e.g., blind a star tracker while injecting misleading commands) to amplify effect. | |
| RD-0005.03 | Kinetic Physical ASAT | Kinetic capabilities physically strike space or ground elements. In space, direct-ascent systems launch from Earth to intercept a satellite on orbit; co-orbital systems maneuver in space to approach and impact a target. On the ground, kinetic attacks can target stations or support infrastructure. These actions are generally easier to detect and attribute and often produce persistent, hazardous debris in orbit, especially at higher altitudes, making them strategically escalatory. Actors developing or accessing such capabilities gain credible coercive power but at significant political and operational cost. | |
| RD-0005.04 | Electronic ASAT | Electronic ASAT attacks target the communications lifelines of space systems rather than their structures: jamming raises the noise floor to deny service; spoofing crafts believable but false signals (navigation, timing, or control). These effects are usually transient and can be difficult to attribute quickly, yet they are operationally useful and comparatively inexpensive. Actors may obtain portable or fixed jammers, high-gain antennas with agile waveforms, and specialized signal-processing toolchains; from orbit, a nearby asset can deliver highly selective interference. | |
| IA-0001 | Compromise Supply Chain | Adversaries achieve first execution before the spacecraft ever flies by inserting malicious code, data, or configuration during manufacturing, integration, or delivery. Targets include software sources and dependencies, build systems and compilers, firmware/bitstreams for MCUs and FPGAs, configuration tables, test vectors, and off-the-shelf avionics. Inserted artifacts are designed to appear legitimate, propagate through normal processes, and activate under routine procedures or specific modes (e.g., safing, maintenance). Common insertion points align with where trust is assumed, vendor updates, mirrors and registries, CI/CD runners, programming stations, and “golden image” repositories. The result is pre-positioned access that blends with baseline behavior, often with delayed or conditional triggers and strong deniability. | |
| IA-0001.02 | Software Supply Chain | Here the manipulation targets software delivered to flight or ground systems: altering source before build, swapping signed binaries at distribution edges, subverting update metadata, or using stolen signing keys to issue malicious patches. Space-specific vectors include mission control applications, schedulers, gateway services, flight tables and configuration packages, and firmware loads during I&T or LEOP. Adversaries craft payloads that pass superficial validation, trigger under particular operating modes, or reintroduce known weaknesses through version rollback. “Data payloads” such as malformed tables, ephemerides, or calibration products can double as exploits when parsers are permissive. The objective is to ride the normal promotion pipeline so the implant arrives pre-trusted and executes as part of routine operations. | |
| IA-0001.03 | Hardware Supply Chain | Adversaries alter boards, modules, or programmable logic prior to delivery to create latent access or reliability sabotage. Tactics include inserting hardware Trojans in ASIC/FPGA designs, modifying bitstreams or disabling security fuses, leaving debug interfaces (JTAG/SWD/UART) active, substituting near-spec counterfeits, or embedding parts that fail after specific environmental or temporal conditions (“time-bomb” components). Other avenues target programming stations and “golden” images so entire lots inherit the same weakness. Microcontroller boot configurations, peripheral EEPROMs, and supervisory controllers are common leverage points because small changes there can reshape trust boundaries across the bus. The effect is a platform that behaves nominally through acceptance test yet enables covert control, targeted degradation, or delayed failure once on orbit. | |
| IA-0004 | Secondary/Backup Communication Channel | Adversaries pursue alternative paths to the spacecraft that differ from the primary TT&C in configuration, monitoring, or authentication. Examples include backup MOC/ground networks, contingency TT&C chains, maintenance or recovery consoles, low-rate emergency beacons, and secondary receivers or antennas on the vehicle. These channels exist to preserve commandability during outages, safing, or maintenance; they may use different vendors, legacy settings, or simplified procedures. Initial access typically pairs reconnaissance of failover rules with actions that steer operations onto the backup path, natural events, induced denial on the primary, or simple patience until scheduled tests and handovers occur. Once traffic flows over the alternate path, the attacker leverages its distinct procedures, dictionaries, or rate/size limits to introduce commands or data that would be harder to inject on the primary. | |
| IA-0004.01 | Ground Station | Threat actors may target the backup ground segment, standby MOC sites, alternate commercial stations, or contingency chains held in reserve. Threat actors establish presence on the backup path (operator accounts, scheduler/orchestration, modem profiles, antenna control) and then exploit moments when operations shift: planned exercises, maintenance at the primary site, weather diversions, or failover during anomalies. They may also shape conditions so traffic is re-routed, e.g., by saturating the primary’s RF front end or consuming its schedules, without revealing their involvement. Once on the backup, prepositioned procedures, macros, or configuration sets allow command injection, manipulation of pass timelines, or quiet collection of downlink telemetry. | |
| IA-0004.02 | Receiver | Threat actors may target the spacecraft’s secondary (backup) RF receive path, often a differently sourced radio, alternate antenna/feed, or cross-strapped front end that is powered or enabled under specific modes. Threat actors map when the backup comes into play (safing, antenna obscuration, maintenance, link degradation) and what command dictionaries, framing, or authentication it expects. If the backup receiver has distinct waveforms, counters, or vendor defaults, the attacker can inject traffic that is accepted only when that path is active, limiting exposure during nominal ops. Forcing conditions that enable the backup, jamming the primary, exploiting geometry, or waiting for routine tests, creates the window for first execution. The result is a foothold gained through a rarely used RF path, exploiting differences in implementation and operational cadence between primary and standby receive chains. | |
| IA-0006 | Compromise Hosted Payload | Adversaries target hosted payloads as an alternate doorway into the host spacecraft. Hosted payloads often expose their own command sets, file services, and telemetry paths, sometimes via the host’s TT&C chain, sometimes through a parallel ground infrastructure under different operational control. Initial access arises when an attacker obtains the ability to issue payload commands, upload files, or alter memory/register state on the hosted unit. Because data and control must traverse an interface to the host bus (power, time, housekeeping, data routing, gateway processors), the payload–host boundary can also carry management functions: mode transitions, table loads, firmware updates, and cross-strapped links that appear only in maintenance or contingency modes. With knowledge of the interface specification and command dictionaries, a threat actor can activate rarely used modes, inject crafted data products, or trigger gateway behaviors that extend influence beyond the payload itself. In multi-tenant or commercial hosting arrangements, differences in keying, procedures, or scheduling between the payload operator and the bus operator provide additional opportunity for a first foothold that looks like routine payload commanding. | |
| IA-0008 | Rogue External Entity | Adversaries obtain a foothold by interacting with the spacecraft from platforms outside the authorized ground architecture. A “rogue external entity” is any actor-controlled transmitter, platform, or node, ground, maritime, airborne, or space-based. Most interact by radiating or exchanging traffic using mission-compatible waveforms, framing, or crosslink protocols. Others carry no mission-compatible capability at all, and instead apply interference, directed energy, or physical proximity to shape the conditions under which access becomes possible. The technique exploits the fact that many vehicles must remain commandable and discoverable over wide areas and across multiple modalities. Using public ephemerides, pass predictions, and knowledge of acquisition procedures, the actor times transmissions to line-of-sight windows, handovers, or maintenance periods. Initial access stems from presenting traffic that the spacecraft will parse or prioritize, such as syntactically valid telecommands, crafted ranging/acquisition exchanges, crosslink service advertisements, or payload/user-channel messages that bridge into the command/data path, or, for entities operating by effect rather than by protocol, from the contingency behavior those effects induce. | |
| IA-0008.03 | ASAT/Counterspace Weapon | Adversaries leverage counterspace platforms to create conditions under which initial execution becomes possible or to impose effects directly. Electronic warfare systems can jam or spoof links so that the target shifts to contingency channels or accepts crafted navigation/control signals; directed-energy systems can dazzle sensors or upset electronics, shaping mode transitions and autonomy responses; kinetic or contact-capable systems can enable mechanical interaction that exposes maintenance or debug paths. In each case, the counterspace asset is an external actor-controlled node that interacts with the spacecraft outside authorized ground pathways. Initial access may be the immediate result of accepted spoofed traffic, or it may be secondary, arising when the target enters states with broader command acceptance, alternative receivers, or service interfaces that the adversary can then exploit. | |
| IA-0009 | Trusted Relationship | Adversaries obtain first execution by riding connections that the mission already trusts, formal interconnections with partners, vendors, and user communities. Once a third party is compromised, the actor inherits that entity’s approved routes into mission enclaves: VPNs and jump hosts into ground networks, API keys into cloud tenants, automated file drops that feed command or update pipelines, and collaboration spaces where procedures and dictionaries circulate. Because traffic, credentials, and artifacts originate from known counterparts, the initial execution event can appear as a routine payload task, scheduled procedure, or software update promoted through established processes. | |
| IA-0009.01 | Mission Collaborator (academia, international, etc.) | Missions frequently depend on distributed teams, instrument builders at universities, science operations centers, and international partners, connected by data portals, shared repositories, and federated credentials. A compromise of a collaborator yields access to telescience networks, analysis pipelines, instrument commanding tools, and file exchanges that deliver ephemerides, calibration products, procedures, or configuration tables into mission workflows. Partners may operate their own ground elements or payload gateways under delegated authority, creating additional entry points whose authentication and logging differ from the prime’s. Initial access emerges when attacker-modified artifacts or commands traverse these sanctioned paths: a revised calibration script uploaded through a science portal, a configuration table promoted by a cross-org CI job, or a payload task submitted via a collaboration queue and forwarded by the prime as routine work. Variations in process rigor, identity proofing, and toolchains across institutions amplify the attacker’s options while preserving the appearance of legitimate partner activity. | |
| IA-0009.02 | Vendor | Vendors that design, integrate, or support mission systems often hold elevated, persistent routes into operations: remote administration of ground software and modems, access to identity providers and license servers, control of cloud-hosted services, and authority to deliver firmware, bitstreams, or patches. Attackers who compromise a vendor’s enterprise or build environment can assume these roles, issuing commands through approved consoles, queuing updates in provider-operated portals, or invoking maintenance procedures that the mission expects the vendor to perform. Some vendor pathways terminate directly on RF equipment or key-management infrastructure; others ride cross-account cloud roles or managed SaaS backends that handle mission data and scheduling. | |
| IA-0009.03 | User Segment | The “user segment” encompasses end users and their equipment that interact with mission services, SATCOM terminals, customer ground gateways, tasking portals, and downstream processing pipelines for delivered data. Where these environments interconnect with mission cores, a compromised user domain becomes a springboard. Attackers can inject malformed tasking requests that propagate into payload scheduling, craft user-plane messages that traverse gateways into control or management planes, or seed data products that flow back to mission processing systems and automation. In broadband constellations and hosted services, user terminals may share infrastructure with TT&C or provider management networks, creating opportunities to pivot from customer equipment into provider-run nodes that the spacecraft trusts. | |
| IA-0010 | Unauthorized Access During Safe-Mode | Adversaries time their first execution to coincide with safe-mode, when the vehicle prioritizes survival and recovery. In many designs, safe-mode reconfigures attitude, reduces payload activity, lowers data rates, and enables contingency dictionaries or maintenance procedures that are dormant in nominal operations. Authentication, rate/size limits, command interlocks, and anti-replay handling may differ; some implementations reset counters, relax timetag screening, accept broader command sets, or activate alternate receivers and beacons to improve commandability. Ground behavior also shifts: extended passes, emergency scheduling, and atypical station use create predictable windows. An attacker who understands these patterns can present syntactically valid traffic that aligns with safe-mode expectations, maintenance loads, recovery scripts, table edits, or reboot/patch sequences, so the first accepted action appears consistent with fault recovery rather than intrusion. | |
| IA-0013 | Compromise Host Spacecraft | The inverse of "IA-0006: Compromise Hosted Payload", this technique describes adversaries that are targeting a hosted payload, the host space vehicle (SV) can serve as an initial access vector to compromise the payload through vulnerabilities in the SV's onboard systems, communication interfaces, or software. If the SV's command and control systems are exploited, an attacker could gain unauthorized access to the vehicle's internal network. Once inside, the attacker may laterally move to the hosted payload, particularly if it shares data buses, processors, or communication links with the vehicle. | |
| EX-0005 | Exploit Hardware/Firmware Corruption | The adversary achieves execution or effect beneath the software stack, in device firmware, programmable logic, or the hardware itself, either by corrupting that layer or by driving it through interfaces that function exactly as designed. Examples include tampering with firmware images or configuration blobs burned into non-volatile memory; targeting MCU/SoC boot ROM fallbacks; editing FPGA bitstreams or partial-reconfiguration frames; leveraging physical phenomena and timing to flip bits or skip checks; or issuing legitimate low-level device, maintenance, and calibration commands that act directly on hardware without passing through high-level command mediation. Because these actions occur below or alongside the operating system and application FSW, traditional endpoint safeguards see normal interfaces while trust anchors are already altered. | |
| EX-0005.01 | Design Flaws | Threat actors may exploit inherent properties or errata in the hardware/logic design rather than injecting new code. Levers include undocumented or weakly specified behaviors (scan chains, test modes, debug straps), counter/timer rollovers and wraparound, interrupt storms and priority inversions, MMU/TLB corner cases, DMA engines that can write outside intended buffers, and bus arbitration or clock-domain crossing issues that permit stale or reordered writes. RNGs and crypto accelerators with flawed seeding or side-channel leakage can expose secrets or enable predictable authentication values. In programmable logic, vulnerable state machines, insufficient reset paths, and hazardous partial-reconfiguration regions create opportunities to drive the design into privileged or undefined states. Even reliability features can be turned: hardware timers intended for liveness can be paced to starve control loops; ECC policies can be nudged so correction conceals attacker-induced drift. The common thread is using the platform’s own guarantees, timing, priority, persistence, or fault handling, to cause privileged behavior that the software stack accepts as “by design.” | |
| EX-0008 | Time Synchronized Execution | Malicious logic is arranged to run at precise times derived from onboard clocks or distributed time sources. The trigger may be absolute or relative. Spacecraft commonly maintain multiple clocks and counters and schedule autonomous sequences against them. An attacker leverages this machinery to ensure effects occur during tactically advantageous windows. Time-based execution reduces exposure, simplifies coordination across assets, and makes reproduction difficult in lab settings that lack the same temporal context. | |
| EX-0008.01 | Absolute Time Sequences | Execution is keyed to a fixed wall-clock timestamp or epoch, independent of current vehicle state. The implant watches a trusted time source, GNSS-derived time, crosslink-distributed network time, oscillator-disciplined UTC/TAI, or mission elapsed time anchored at activation, and triggers exactly at a programmed date/time. Absolute triggering supports coordinated multi-asset actions and allows long dormancy with a precise activation moment. Variants incorporate calendar logic (e.g., “first visible pass after YYYY-MM-DD hh:mm:ss”) or guard bands to fire only if the clock is within certain tolerances, ensuring the event occurs even with minor drift yet remains rare enough to blend with scheduled operations. | |
| EX-0008.02 | Relative Time Sequences | Execution is keyed to elapsed time since a reference event. The implant latches a start point, boot, reset, safing entry/exit, receipt of a particular telemetry/command pattern, achievement of sun-pointing, and arms a countdown or set of offsets (“N seconds after event,” “repeat every M cycles”). Relative sequences are resilient to clock discontinuities and mirror how many spacecraft schedule internal activities (e.g., after boot, run calibrations; after acquisition, start downlink). An attacker exploits this to ensure the trigger fires only within specific operational phases and to survive resets that would thwart absolute timestamps: after every reboot, wait for housekeeping steady state, then act; or, after a wheel unload completes, inject an additional command while control laws are in a known configuration. | |
| EX-0011 | Exploit Reduced Protections During Safe-Mode | The adversary times on-board actions to the period when the vehicle is in safe-mode and operating with altered guardrails. In many designs, safe-mode enables contingency command dictionaries, activates alternate receivers or antennas, reduces data rates, and prioritizes survival behaviors (sun-pointing, thermal/power conservation). Authentication checks, anti-replay windows, rate/size limits, and interlocks may differ from nominal; counters can be reset, timetag screening relaxed, or maintenance procedures made available for recovery. Ground cadence also changes, longer passes, emergency scheduling, atypical station selection, creating predictable windows for interaction. Using knowledge of these patterns, an attacker issues maintenance-looking loads, recovery scripts, parameter edits, or boot/patch sequences that the spacecraft is primed to accept while safed. Because responses (telemetry beacons, acknowledgments, mode bits) resemble normal anomaly recovery, the first execution event blends with expected behavior, allowing unauthorized reconfiguration, software modification, or state manipulation to occur under the cover of fault response. | |
| EX-0014 | Spoofing | The adversary forges inputs that subsystems treat as trustworthy truth, time tags, sensor measurements, bus messages, or navigation signals, so onboard logic acts on fabricated reality. Because many control loops and autonomy rules assume data authenticity once it passes basic sanity checks, carefully shaped spoofs can trigger mode transitions, safing, actuator commands, or payload behaviors without touching flight code. Spoofing may occur over RF (e.g., GNSS, crosslinks, TT&C beacons), over internal networks/buses (message injection with valid identifiers), or at sensor/actuator interfaces (electrical/optical stimulation that produces plausible readings). Effects range from subtle bias (drifting estimates, skewed calibrations) to acute events (unexpected slews, power reconfiguration, recorder re-indexing), and can also pollute downlinked telemetry or science products so ground controllers interpret a false narrative. The hallmark is that the spacecraft chooses the adversary’s action path because the forged data passes through normal processing chains. | |
| EX-0014.05 | Ballistic Missile Spoof | In this variant, attackers deploy decoys or emitters designed to mimic ballistic-missile signatures so early-warning and missile-defense systems allocate interceptors and attention to false targets. Decoys can shape radar cross-section and thermal profiles, stage deployment to simulate staging events, or use cooling/heating to emulate plume and body signatures, while coordinated timing and trajectories reinforce plausibility. The objective is resource depletion and distraction: saturate tracking, cueing, and discrimination so defenses are preoccupied prior to an actual strike or are left with reduced capacity afterward. Although the immediate target is the defense architecture, space-based sensors and their ground processing are integral to the effect; spoofed scenes enter the normal detection and tracking pipelines and propagate as authoritative truth until later discrimination overturns them. | |
| EX-0015 | Side-Channel Attack | Adversaries extract secrets or steer execution by observing or perturbing physical byproducts of computation rather than the intended interfaces. Passive channels include timing, power draw, electromagnetic emissions, acoustic/optical leakage, and thermal patterns correlated with operations such as key use, counter updates, or parser activity. Active channels deliberately induce faults during runtime, e.g., voltage or clock glitches, electromagnetic/laser injection, or targeted radiation, to flip bits, skip checks, or bias intermediate values. On spacecraft, prime targets include crypto modules, SDR/FPGA pipelines, bootloaders, and bus controllers whose switching behavior or error handling reveals protocol state or key material. With sufficient samples, or with repeated fault attempts, statistical features emerge that reduce entropy of the sensitive variable under study; in effect, a successful fault campaign turns into information leakage comparable to a passive side channel. Collection vantage points range from on-orbit proximity (for EM/optical), to ATLO and ground test (for direct probing), to instrumented compromised hardware already in the signal path. | |
| EX-0016 | Jamming | Jamming is an electronic attack that uses radio frequency energy to deny the use of a signal, whether that signal carries communications, navigation, or timing. A jammer must operate in the same frequency band and within the field of view of the antenna it is targeting. Unlike physical attacks, the interference itself is completely reversible: once the jammer is disengaged, reception can be restored. Second-order effects may persist, however, where the outage has already caused a clock to drift, a schedule to slip, or a synchronization state to be lost. Attribution of jamming can be tough because the source can be small and highly mobile, and users operating on the wrong frequency or pointed at the wrong satellite can jam friendly communications.* Similar to intentional jamming, accidental jamming can cause temporary signal degradation. Accidental jamming refers to unintentional interference with communication signals, and it can potentially impact spacecraft in various ways, depending on the severity, frequency, and duration of the interference. *https://aerospace.csis.org/aerospace101/counterspace-weapons-101 | |
| EX-0016.01 | Uplink Jamming | The attacker transmits toward the spacecraft’s uplink receive antenna, within its main lobe or significant sidelobes, at the operating frequency and sufficient power spectral density to drive the uplink Eb/N₀ below the demodulator’s threshold. Uplink jamming prevents acceptance of telecommands and ranging/acquisition traffic, delaying or blocking scheduled operations. Because the receiver resides on the spacecraft, the jammer must be located within the spacecraft’s receive footprint and match its polarization and Doppler conditions well enough to couple energy into the front end. | |
| EX-0016.02 | Downlink Jamming | Downlink jammers target the users of a satellite by creating noise in the same frequency as the downlink signal from the satellite. A downlink jammer only needs to be as powerful as the signal being received on the ground and must be within the field of view of the receiving terminal’s antenna. This limits the number of users that can be affected by a single jammer. Since many ground terminals use directional antennas pointed at the sky, a downlink jammer typically needs to be located above the terminal it is attempting to jam. This limitation can be overcome by employing a downlink jammer on an air or space-based platform, which positions the jammer between the terminal and the satellite. This also allows the jammer to cover a wider area and potentially affect more users. Ground terminals with omnidirectional antennas, such as many GPS receivers, have a wider field of view and thus are more susceptible to downlink jamming from different angles on the ground.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101 | |
| EX-0016.03 | Position, Navigation, and Timing (PNT) Jamming | The attacker raises the noise floor in GNSS bands so satellite navigation signals are not acquired or tracked. Loss of PNT manifests as degraded or unavailable position/velocity/time solutions, which in turn disrupts functions that depend on them, time distribution, attitude aiding, scheduling, anti-replay windows, and visibility prediction. Because GNSS signals at the receiver are extremely weak, modest jammers within the antenna field of view can produce outsized effects; mobile emitters can create intermittent outages aligned with the attacker’s objectives. | |
| EX-0017 | Kinetic Physical Attack | The adversary inflicts damage by physically striking space assets or their supporting elements, producing irreversible effects that are generally visible to space situational awareness. Kinetic attacks in orbit are commonly grouped into direct-ascent engagements, launched from Earth to intercept a target on a specific pass, and co-orbital engagements, in which an on-orbit vehicle maneuvers to collide with or detonate near the target. Outcomes include structural breakup, loss of attitude control, sensor or antenna destruction, and wholesale mission termination; secondary effects include debris creation whose persistence depends on altitude and geometry. Because launches and on-orbit collisions are measurable, these actions tend to be more attributable and offer near–real-time confirmation of effect compared to non-kinetic methods. | |
| EX-0017.01 | Direct Ascent ASAT | A direct-ascent ASAT is often the most commonly thought of threat to space assets. It typically involves a medium- or long-range missile launching from the Earth to damage or destroy a satellite in orbit. This form of attack is often easily attributed due to the missile launch which can be easily detected. Due to the physical nature of the attacks, they are irreversible and provide the attacker with near real-time confirmation of success. Direct-ascent ASATs create orbital debris which can be harmful to other objects in orbit. Lower altitudes allow for more debris to burn up in the atmosphere, while attacks at higher altitudes result in more debris remaining in orbit, potentially damaging other spacecraft in orbit.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101 | |
| EX-0017.02 | Co-Orbital ASAT | A co-orbital ASAT uses a spacecraft already in space to conduct a deliberate collision or near-field detonation. After insertion, often well before any hostile action, the vehicle performs rendezvous and proximity operations to achieve the desired relative geometry, then closes to impact or triggers a kinetic or explosive device. Guidance relies on relative navigation (optical, lidar, crosslink cues) and precise timing to manage closing speeds and contact angle. Compared with direct-ascent shots, co-orbital approaches can loiter, shadow, or “stalk” a target for extended periods, masking as inspection or servicing until the terminal maneuver. Effects include mechanical disruption, fragmentation, or mission-ending damage, with debris characteristics shaped by the chosen altitude, closing velocity, and collision geometry. | |
| EX-0018 | Non-Kinetic Physical Attack | The adversary inflicts physical effects on a satellite without mechanical contact, using energy delivered through the environment. Principal modalities are electromagnetic pulse (EMP), high-power laser (optical/thermal effects), and high-power microwave (HPM). These methods can be tuned for reversible disruption (temporary sensor saturation, processor upsets) or irreversible damage (component burnout, optics degradation), and may be executed from ground, airborne, or space platforms given line-of-sight and power/aperture conditions. Forensics are often ambiguous: signatures may resemble environmental phenomena or normal degradations, and confirmation of effect is frequently limited to what the operator observes in telemetry or performance loss. | |
| EX-0018.01 | Electromagnetic Pulse (EMP) | An EMP delivers a broadband, high-amplitude electromagnetic transient that couples into spacecraft electronics and harnesses, upsetting or damaging components over wide areas. In space, the archetype is a high-altitude nuclear event whose prompt fields induce immediate upsets and whose secondary radiation environment elevates dose and charging for an extended period along affected orbits. Consequences include widespread single-event effects, latch-ups, permanent degradation of sensitive devices, and accelerated aging of solar arrays and materials. The effect envelope is large and largely indiscriminate: multiple satellites within view can experience simultaneous anomalies consistent with intense electromagnetic stress and enhanced radiation. | |
| EX-0018.02 | High-Powered Laser | A high-powered laser can be used to permanently or temporarily damage critical satellite components (i.e. solar arrays or optical centers). If directed toward a satellite’s optical center, the attack is known as blinding or dazzling. Blinding, as the name suggests, causes permanent damage to the optics of a satellite. Dazzling causes temporary loss of sight for the satellite. While there is clear attribution of the location of the laser at the time of the attack, the lasers used in these attacks may be mobile, which can make attribution to a specific actor more difficult because the attacker does not have to be in their own nation, or even continent, to conduct such an attack. Only the satellite operator will know if the attack is successful, meaning the attacker has limited confirmation of success, as an attacked nation may not choose to announce that their satellite has been attacked or left vulnerable for strategic reasons. A high-powered laser attack can also leave the targeted satellite disabled and uncontrollable, which could lead to collateral damage if the satellite begins to drift. A higher-powered laser may permanently damage a satellite by overheating its parts. The parts most susceptible to this are satellite structures, thermal control panels, and solar panels.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101 | |
| EX-0018.03 | High-Powered Microwave | High-powered microwave (HPM) weapons can be used to disrupt or destroy a satellite’s electronics. A “front-door” HPM attack uses a satellite’s own antennas as an entry path, while a “back-door” attack attempts to enter through small seams or gaps around electrical connections and shielding. A front-door attack is more straightforward to carry out, provided the HPM is positioned within the field of view of the antenna that it is using as a pathway, but it can be thwarted if the satellite uses circuits designed to detect and block surges of energy entering through the antenna. In contrast, a back-door attack is more challenging, because it must exploit design or manufacturing flaws, but it can be conducted from many angles relative to the satellite. Both types of attacks can be either reversible or irreversible; however, the attacker may not be able to control the severity of the damage from the attack. Both front-door and back-door HPM attacks can be difficult to attribute to an attacker, and like a laser weapon, the attacker may not know if the attack has been successful. A HPM attack may leave the target satellite disabled and uncontrollable which can cause it to drift into other satellites, creating further collateral damage.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101 | |
| PER-0002 | Backdoor | A backdoor is a covert access path that bypasses normal authentication, authorization, or operational checks so the attacker can reenter the system on demand. Backdoors may be preexisting (undocumented service modes, maintenance accounts, debug features) or introduced by the adversary during development, integration, or on-orbit updates. Triggers range from “magic” opcodes and timetags to specific geometry/time conditions, counters, or data patterns embedded in routine traffic. The access they provide varies from expanded command sets and relaxed rate/size limits to alternate communications profiles and hidden file/parameter interfaces. Well-crafted backdoors blend with nominal behavior, appearing as ordinary operations while quietly accepting instructions that other paths would reject, thereby sustaining the attacker’s foothold across passes, resets, and operator handovers. | |
| PER-0002.01 | Hardware Backdoor | Hardware backdoors leverage properties of the physical design to provide durable, low-visibility reentry. Examples include enabled test/scan chains, manufacturing or boot-strap modes invoked by pins or registers, persistent debug interfaces (JTAG/SWD/UART), undocumented device commands, and logic inserted in FPGA/ASIC designs that activates under specific stimuli. Because these mechanisms sit below or beside flight software, they can grant direct access to buses, memories, or peripheral control even when higher layers appear healthy. Triggers may be electrical (pin states, voltage/clock sequences), protocol-level (special patterns on an instrument link), or environmental/temporal (particular temperature ranges, timing offsets). Once on orbit, such pathways are difficult to remove or reconfigure, allowing the attacker to persist by reusing the same physical entry points whenever conditions are met. | |
| PER-0002.02 | Software Backdoor | Software backdoors are code paths intentionally crafted or later inserted to provide privileged functionality on cue. In flight contexts, they appear as hidden command handlers, alternate authentication checks, special user/role constructs, or procedure/script hooks that accept nonpublic inputs. They can be embedded in flight applications, separation kernels or drivers, gateway processors that translate bus/payload traffic, or update/loader utilities that handle tables and images. SDR configurations offer another avenue: non-public waveforms, subcarriers, or framing profiles that, when selected, expose a private command channel. Activation is often conditional, specific timetags, geometry, message sequences, or file names, to keep the feature dormant during routine testing and operations. Once present, the backdoor provides a repeatable way to execute commands or modify state without traversing the standard control surfaces, sustaining the adversary’s access over time. | |
| DE-0002 | Disrupt or Deceive Downlink | Threat actors may target any point in the telemetry chain, onboard generation and transmission, the downlink path itself, or ground-side reception, processing, and display, to disrupt the operator’s visibility into spacecraft health and activity. This may involve denial-based attacks that prevent the spacecraft from transmitting telemetry to the ground (e.g., disabling telemetry links or crashing telemetry software), or more subtle deception-based attacks that manipulate telemetry content to conceal unauthorized actions. Since telemetry is the primary method ground controllers rely on to monitor spacecraft status, any disruption or manipulation can delay or prevent detection of malicious activity, suppress automated or manual mitigations, or degrade trust in telemetry-based decision support systems. | |
| DE-0002.02 | Jam Link Signal | Threat actors may overwhelm/jam the downlink signal to prevent transmitted telemetry signals from reaching their destination without severe modification/interference, effectively leaving ground controllers unaware of vehicle activity during this time. Telemetry is the only method in which ground controllers can monitor the health and stability of the spacecraft while in orbit. By disabling this downlink, threat actors may be able to stop mitigations from taking place. | |
| DE-0005 | Subvert Protections via Safe-Mode | The adversary exploits the spacecraft’s recovery posture to bypass controls that are stricter in nominal operations. During safe-mode, vehicles often accept contingency dictionaries, relax rate/size and timetag checks, activate alternate receivers or antennas, and emit reduced or summary telemetry. By timing actions to this state, or deliberately inducing it, the attacker issues maintenance-looking edits, loads, or mode changes that proceed under broadened acceptance while downlink visibility is thinned. Unauthorized activity blends with anomaly response, evading both automated safeguards and operator suspicion. | |
| DE-0009 | Camouflage, Concealment, and Decoys (CCD) | The adversary exploits the physical and operational environment, or manipulates the sensing and processing on which observers depend, to reduce detectability, mislead, or provoke a response. Tactics include signature management (minimizing RF/optical/thermal/RCS), controlled emissions timing, deliberate power-down/dormancy, geometry choices that hide within clutter or eclipse, and the deployment of decoys that generate convincing tracks. CCD can also leverage naturally noisy conditions, debris-rich regions, auroral radio noise, solar storms, to mask proximity operations or to provide plausible alternate explanations for anomalies. The unifying theme is perception management: shape what sensors and their processing chains perceive so surveillance and attribution lag, misclassify, or look elsewhere. This may be achieved through the environment, through decoys and signatures presented to distant observers, or through deception directed at a particular vehicle’s onboard sensing or a particular ground processing pipeline. The same methods may be used to provoke a defender into committing limited resources prematurely. | |
| DE-0009.03 | Trigger Premature Intercept | Decoys and deceptive signatures are used to provoke defenders into committing limited resources early, inspection vehicles, interceptors, laser dwell time, maneuver fuel, or analyst attention. The attacker deploys objects or emissions that mimic credible threats (trajectories, RCS/brightness, modulation) so tracking and discrimination systems prioritize the decoy. While defenses engage, the true operation proceeds with reduced scrutiny, or follows shortly after when defensive capacity and timelines are depleted. The effect is resource exhaustion and timeline compression on the defender’s side, increasing the success window for the actual action. | |
| DE-0009.04 | Targeted Deception of Onboard SSA/SDA Sensors | The attacker aims at the spacecraft’s own proximity-awareness stack, cameras, star-tracker side products, lidar/radar, RF transponders, and the onboard fusion that estimates nearby objects. Methods include optical dazzling or reflective camouflage that confuses centroiding and detection, RCS management to fall below radar gate thresholds, intermittent or misleading transponder replies, and presentation of spoofed fiducials or optical patterns tuned to the vehicle’s detection algorithms. By biasing these local sensors and their fusion logic, the adversary hides approach, distorts relative-state estimates, or induces the target to classify a nearby object as benign clutter, masking proximity operations without relying on external catalog errors. | |
| LM-0001 | Hosted Payload | The adversary pivots through the host–payload boundary to reach additional subsystems. Hosted payloads exchange power, time, housekeeping, and data with the bus via defined gateways (e.g., SpaceWire, 1553, Ethernet) and often support file services, table loads, and command dictionaries distinct from the host’s. A foothold on the payload can be used to inject traffic through the gateway processor, request privileged services (time/ephemeris distribution, firmware loads), or ride shared backplanes where payload traffic is bridged into C&DH networks. In some designs, payload processes execute on host compute or expose maintenance modes that temporarily widen access, creating paths from the payload into attitude, power, storage, or recorder resources. The movement is transitive: compromise a co-resident unit, then traverse the trusted interface that already exists for mission operations. | |
| LM-0002 | Exploit Lack of Bus Segregation | On flat architectures, where remote terminals, subsystems, and payloads share a common bus with minimal partitioning, any node that can transmit may influence many others. An attacker leverages this by forging message IDs or terminal addresses, replaying actuator/sensor frames, seizing or imitating bus-controller roles, or abusing gateway bridges that forward traffic between links (e.g., 1553↔SpaceWire/CAN). Because consumers often act on the latest valid-looking message, crafted traffic from one compromised device can reconfigure peers, toggle power domains, or write persistent parameters. Weak role enforcement and broadcast semantics allow privilege escalation from a peripheral to effective system-wide influence, turning the shared medium into a highway for further compromise. | |
| EXF-0003 | Signal Interception | The adversary captures mission traffic in transit, on ground networks or over the space link, so that payload products, housekeeping, and command/ack exchanges can be reconstructed offline. Vantage points include tapped ground LANs/WANs between MOC and stations, baseband interfaces (IF/IQ), RF/optical receptions within the antenna field of view, and crosslink monitors. Depending on protection, the haul ranges from plaintext frames to encrypted bitstreams whose headers, rates, and schedules still yield valuable context (APIDs, VCIDs, pass timing, file manifest cues). Intercepted sessions can guide later replay, cloning, or targeted downlink requests. | |
| EXF-0003.01 | Uplink Exfiltration | Here the target is command traffic from ground to space. By receiving or tapping the uplink path, the adversary collects telecommand frames, ranging/acquisition exchanges, and any file or table uploads. If confidentiality is weak or absent, opcode/argument content, dictionaries, and procedures become directly readable; even when encrypted, session structure, counters, and acceptance timing inform future command-link intrusion or replay. Captured material can reveal maintenance windows, contingency dictionaries, and authentication schemes that enable subsequent exploitation. | |
| EXF-0003.02 | Downlink Exfiltration | The attacker records spacecraft-to-ground traffic, real-time telemetry, recorder playbacks, payload products, and mirrored command sessions, to obtain mission data and health/state information. With sufficient signal quality and protocol knowledge, frames and packets are demodulated and extracted for offline use; where protection exists only on uplink or is inconsistently applied, downlink content may still be in clear. Downlinked command echoes, event logs, and file catalogs can expose internal activities and aid follow-on targeting while the primary objective remains data capture at scale. | |
| ID | Description | |
| SV-AC-3 |
Compromised master keys or any encryption key |
|
| SV-CF-2 |
Eavesdropping (RF and proximity) |
|
| SV-IT-2 |
Unauthorized modification or corruption of data |
|
| SV-MA-2 |
Heaters and flow valves of the propulsion subsystem are controlled by electric signals so cyberattacks against these signals could cause propellant lines to freeze, lock valves, waste propellant or even put in de-orbit or unstable spinning |
|
| SV-AV-4 |
Attacking the scheduling table to affect tasking |
|
| SV-IT-5 |
Onboard control procedures (i.e., ATS/RTS) that execute a scripts/sets of commands |
|
| SV-MA-3 |
Attacks on critical software subsystems Attitude Determination and Control (AD&C) subsystem determines and controls the orientation of the satellite. Any cyberattack that could disrupt some portion of the control loop - sensor data, computation of control commands, and receipt of the commands would impact operations Telemetry, Tracking and Commanding (TT&C) subsystem provides interface between satellite and ground system. Computations occur within the RF portion of the TT&C subsystem, presenting cyberattack vector Command and Data Handling (C&DH) subsystem is the brains of the satellite. It interfaces with other subsystems, the payload, and the ground. It receives, validate, decodes, and sends commands to other subsystems, and it receives, processes, formats, and routes data for both the ground and onboard computer. C&DH has the most cyber content and is likely the biggest target for cyberattack. Electrical Power Subsystem (EPS) provides, stores, distributes, and controls power on the satellite. An attack on EPS could disrupt, damage, or destroy the satellite. |
|
| SV-SP-1 |
Exploitation of software vulnerabilities (bugs); Unsecure code, logic errors, etc. in the FSW. |
|
| SV-SP-3 |
Introduction of malicious software such as a virus, worm, Distributed Denial-Of-Service (DDOS) agent, keylogger, rootkit, or Trojan Horse |
|
| SV-SP-6 |
Software reuse, COTS dependence, and standardization of onboard systems using building block approach with addition of open-source technology leads to supply chain threat |
|
| SV-SP-9 |
On-orbit software updates/upgrades/patches/direct memory writes. If TT&C is compromised or MOC or even the developer's environment, the risk exists to do a variation of a supply chain attack where after it is in orbit you inject malicious code |
|
| SV-AC-5 |
Proximity operations (i.e., grappling satellite) |
|
| SV-AC-6 |
Three main parts of S/C. CPU, memory, I/O interfaces with parallel and/or serial ports. These are connected via busses (i.e., 1553) and need segregated. Supply chain attack on CPU (FPGA/ASICs), supply chain attack to get malware burned into memory through the development process, and rogue RTs on 1553 bus via hosted payloads are all threats. Security or fault management being disabled by non-mission critical or payload; fault injection or MiTM into the 1553 Bus - China has developed fault injector for 1553 - this could be a hosted payload attack if payload has access to main 1553 bus; One piece of FSW affecting another. Things are not containerized from the OS or FSW perspective; |
|
| SV-AC-8 |
Malicious Use of hardware commands - backdoors / critical commands |
|
| SV-AV-2 |
Satellites base many operations on timing especially since many operations are automated. Cyberattack to disrupt timing/timers could affect the vehicle (Time Jamming / Time Spoofing) |
|
| SV-AV-3 |
Affect the watchdog timer onboard the satellite which could force satellite into some sort of recovery mode/protocol |
|
| SV-IT-3 |
Compromise boot memory |
|
| SV-IT-4 |
Cause bit flip on memory via single event upsets |
|
| SV-MA-8 |
Payload (or other component) is told to constantly sense or emit or run whatever mission it had to the point that it drained the battery constantly / operated in a loop at maximum power until the battery is depleted. |
|
| SV-SP-11 |
Software defined radios - SDR is also another computer, networked to other parts of the spacecraft that could be pivoted to by an attacker and infected with malicious code. Once access to an SDR is gained, the attacker could alter what the SDR thinks is correct frequencies and settings to communicate with the ground. |
|
| SV-SP-7 |
Software can be broken down into three levels (operating system and drivers’ layer, data handling service layer, and the application layer). Highest impact on system is likely the embedded code at the BIOS, kernel/firmware level. Attacking the on-board operating systems. Since it manages all the programs and applications on the computer, it has a critical role in the overall security of the system. Since threats may occur deliberately or due to human error, malicious programs or persons, or existing system vulnerability mitigations must be deployed to protect the OS. |
|
| SV-AV-5 |
Using fault management system against you. Understanding the fault response could be leveraged to get satellite in vulnerable state. Example, safe mode with crypto bypass, orbit correction maneuvers, affecting integrity of TLM to cause action from ground, or some sort of RPO to cause S/C to go into safe mode; |
|
| SV-AV-6 |
Complete compromise or corruption of running state |
|
| SV-DCO-1 |
Not knowing that you were attacked, or attack was attempted |
|
| SV-MA-5 |
Not being able to recover from cyberattack |
|
| SV-AC-1 |
Attempting access to an access-controlled system resulting in unauthorized access |
|
| SV-AC-2 |
Replay of recorded authentic communications traffic at a later time with the hope that the authorized communications will provide data or some other system reaction |
|
| SV-CF-1 |
Tapping of communications links (wireline, RF, network) resulting in loss of confidentiality; Traffic analysis to determine which entities are communicating with each other without being able to read the communicated information |
|
| SV-CF-4 |
Adversary monitors for safe-mode indicators such that they know when satellite is in weakened state and then they launch attack |
|
| SV-IT-1 |
Communications system spoofing resulting in denial of service and loss of availability and data integrity |
|
| SV-AC-7 |
Weak communication protocols. Ones that don't have strong encryption within it |
|
| SV-AV-1 |
Communications system jamming resulting in denial of service and loss of availability and data integrity |
|
| SV-MA-7 |
Exploit ground system and use to maliciously to interact with the spacecraft |
|
| SV-AC-4 |
Masquerading as an authorized entity in order to gain access/Insider Threat |
|
| SV-AV-7 |
The TT&C is the lead contributor to satellite failure over the first 10 years on-orbit, around 20% of the time. The failures due to gyro are around 12% between year one and 6 on-orbit and then ramp up starting around year six and overtake the contributions of the TT&C subsystem to satellite failure. Need to ensure equipment is not counterfeit and the supply chain is sound. |
|
| SV-CF-3 |
Knowledge of target satellite's cyber-related design details would be crucial to inform potential attacker - so threat is leaking of design data which is often stored Unclass or on contractors’ network |
|
| SV-MA-4 |
Not knowing what your crown jewels are and how to protect them now and in the future. |
|
| SV-MA-6 |
Not planning for security on SV or designing in security from the beginning |
|
| SV-SP-10 |
Compromise development environment source code (applicable to development environments not covered by threat SV-SP-1, SV-SP-3, and SV-SP-4). |
|
| SV-SP-2 |
Testing only focuses on functional requirements and rarely considers end to end or abuse cases |
|
| SV-SP-4 |
General supply chain interruption or manipulation |
|
| SV-SP-5 |
Hardware failure (i.e., tainted hardware) {ASIC and FPGA focused} |
|
| SPARTA ID | Requirement | Rationale/Additional Guidance/Notes |
|---|---|---|
| SPR-4 | The [spacecraft] security implementation shall ensure that information should not be allowed to flow between partitioned applications unless explicitly permitted by the system.{SV-AC-6,SV-MA-3,SV-SP-7}{AC-3(3),AC-3(4),AC-4,AC-4(6),AC-4(21),CA-9,IA-9,SA-8(3),SA-8(18),SA-8(19),SC-2(2),SC-7(29),SC-16,SC-32} | Strict partitioning prevents compromise of one application from cascading into mission-critical subsystems. Many spacecraft attacks exploit flat architectures where subsystems implicitly trust one another. Explicit inter-partition authorization limits lateral movement and privilege escalation. This supports containment and fault isolation under both cyber and fault conditions. |
| SPR-7 | The [organization] shall document and design a security architecture using a defense-in-depth approach that allocates the [organization]s defined safeguards to the indicated locations and layers: [Examples include: operating system abstractions and hardware mechanisms to the separate processors in the platform, internal components, and the FSW].{SV-MA-6}{CA-9,PL-7,PL-8,PL-8(1),SA-8(3),SA-8(4),SA-8(7),SA-8(9),SA-8(11),SA-8(13),SA-8(19),SA-8(29),SA-8(30)} | Spacecraft security cannot rely on a single control; layered defenses reduce the likelihood of catastrophic compromise. Documenting safeguard allocation across hardware, OS, firmware, and FSW ensures coverage across attack surfaces. This supports resiliency against both cyber intrusion and supply chain weaknesses. Clear documentation enables verification and independent assessment. |
| SPR-8 | The [organization] shall ensure that the allocated security safeguards operate in a coordinated and mutually reinforcing manner.{SV-MA-6}{CA-7(5),PL-7,PL-8(1),SA-8(19)} | Independent controls that operate in isolation may create security gaps or conflicting behaviors. Coordinated safeguards ensure that encryption, authentication, partitioning, and monitoring functions reinforce each other rather than undermine availability or safety. This reduces bypass risk and improves fault/cyber response integration. Cohesive operation is essential for resilient mission assurance. |
| SPR-9 | The [organization] shall implement a security architecture and design that provides the required security functionality, allocates security controls among physical and logical components, and integrates individual security functions, mechanisms, and processes together to provide required security capabilities and a unified approach to protection.{SV-MA-6}{PL-7,SA-2,SA-8,SA-8(1),SA-8(2),SA-8(3),SA-8(4),SA-8(5),SA-8(6),SA-8(7),SA-8(9),SA-8(11),SA-8(13),SA-8(19),SA-8(29),SA-8(30),SC-32,SC-32(1)} | Security functionality must be intentionally distributed across physical and logical components rather than bolted on post-design. A unified architecture prevents inconsistent enforcement, duplicated controls, or unprotected interfaces. Integrated design reduces attack surface and improves verification of mission-critical protections. |
| SPR-15 | The [spacecraft] shall implement cryptographic mechanisms to identify and reject wireless transmissions that are deliberate attempts to achieve imitative or manipulative communications deception based on signal parameters.{SV-AV-1,SV-IT-1}{AC-3,AC-20,SA-8(19),SC-8(1),SC-23(3),SC-40(3),SI-4(13),SI-4(24),SI-4(25),SI-10(6)} | Adversaries may attempt imitative RF signals to inject commands or manipulate spacecraft behavior. Signal parameter validation (modulation, power, timing, waveform characteristics) strengthens command authentication beyond cryptographic validation alone. This helps mitigate spoofing, replay, and rogue emitter attacks. RF-layer validation complements cryptographic controls. |
| SPR-16 | The [spacecraft] shall ensure that processes reusing a shared system resource (e.g., registers, main memory, secondary storage) do not have access to information (including encrypted representations of information) previously stored in that resource after formal release, by clearing or zeroizing the resource prior to reuse.{SV-AC-6}{AC-3,PM-32,SA-8(2),SA-8(5),SA-8(6),SA-8(19),SC-4,SI-3} | Residual data in memory or registers can create covert channels or leakage paths between partitions. Zeroization prevents recovery of sensitive data by subsequent processes. This mitigates cross-domain leakage and memory scraping attacks. Clearing encrypted remnants is equally important to prevent cryptanalytic exploitation. |
| SPR-22 | The [spacecraft] shall implement boundary protections to separate bus, communications, and payload components supporting their respective functions.{SV-AC-6}{AC-3(3),AC-3(4),CA-9,SA-8(3),SA-8(14),SA-8(18),SA-8(19),SA-17(7),SC-2,SC-2(2),SC-7(13),SC-7(21),SC-7(29),SC-16(3),SC-32,SI-3,SI-4(13),SI-4(25)} | Flat architectures allow compromise of one subsystem to impact all others. Segregated boundaries reduce lateral movement and mission degradation. Isolation ensures payload compromise does not impact TT&C or bus control. This supports containment and survivability. |
| SPR-23 | The [spacecraft] shall isolate mission critical functionality from non-mission critical functionality.{SV-AC-6}{AC-3(3),AC-3(4),CA-9,SA-8(3),SA-8(19),SA-17(7),SC-2,SC-3,SC-3(4),SC-7(13),SC-7(29),SC-32,SC-32(1),SI-3,SI-7(10),SI-7(12)} | Non-critical functions often expand attack surface. Isolation prevents less-trusted components from affecting propulsion, attitude control, or power systems. This reduces cascading failure risk under compromise. Mission-critical systems must maintain operational continuity. |
| SPR-25 | The [spacecraft] shall prevent unauthorized access to system resources by employing an efficient capability based object model that supports both confinement and revocation of these capabilities when the platform security deems it necessary.{SV-AC-6}{AC-3(8),IA-4(9),PM-32,SA-8(2),SA-8(5),SA-8(6),SA-8(18),SA-8(19),SC-2(2),SC-4,SC-16,SC-32,SI-3} | Capability models restrict access to explicit, revocable tokens of authority. This enforces least privilege and supports dynamic revocation under threat conditions. Confinement reduces damage radius of compromised processes. Revocation capability enables adaptive cyber response. |
| SPR-28 | The [spacecraft] shall provide the capability to enter the platform into a known good, operational cyber-safe mode from a tamper-resistant, configuration-controlled (“gold”) image that is authenticated as coming from an acceptable supplier, and has its integrity verified. The [spacecraft] shall refresh only from cryptographically authenticated [organization]-approved sources.{SV-AV-5,SV-AV-6,SV-AV-7}{CP-10(6),CP-12,CP-13,IR-4(3),SA-8(16),SA-8(19),SA-8(21),SA-8(24),SI-13,SI-17} | Cyber-safe mode is an operating mode of a spacecraft during which all nonessential systems are shut down and the spacecraft is placed in a known good state using validated software and configuration settings. Within cyber-safe mode authentication and encryption should still be enabled. The spacecraft should be capable of reconstituting firmware and SW functions to preattack levels to allow for the recovery of functional capabilities. This can be performed by self-healing, or the healing can be aided from the ground. However, the spacecraft needs to have the capability to replan, based on available equipment still available after a cyberattack. The goal is for the vehicle to resume full mission operations. If not possible, a reduced level of mission capability should be achieved. |
| SPR-29 | The [spacecraft] shall enter cyber-safe mode software/configuration should be stored onboard the spacecraft in memory with hardware-based controls and should not be modifiable.{CP-10(6),CP-13,SA-8(16),SA-8(19),SA-8(21),SA-8(24),SI-17} | |
| SPR-30 | The [spacecraft] shall fail to a known secure state for failures during initialization, and aborts preserving information necessary to return to operations in failure.{SV-AV-5,SV-AV-6,SV-AV-7}{CP-10(6),CP-13,SA-8(16),SA-8(19),SA-8(24),SC-24,SI-13,SI-17} | |
| SPR-31 | The [spacecraft] shall fail securely to a secondary device in the event of an operational failure of a primary boundary protection device (i.e., crypto solution).{SV-AC-1,SV-AC-2,SV-CF-1,SV-CF-2}{CP-13,SA-8(19),SA-8(24),SC-7(18),SI-13,SI-13(4)} | If a primary boundary protection device fails, the spacecraft must not revert to insecure operation. Secure failover ensures continuity of confidentiality and integrity protections. This prevents adversaries from inducing failure states to bypass encryption. Redundancy strengthens mission resilience. |
| SPR-32 | The [spacecraft] shall provide or support the capability for recovery and reconstitution to a known state after a disruption, compromise, or failure.{SV-AV-5,SV-AV-6,SV-AV-7}{CP-4(4),CP-10,CP-10(4),CP-10(6),CP-13,IR-4,IR-4(1),SA-8(16),SA-8(19),SA-8(24)} | |
| SPR-34 | The [spacecraft] shall recover to a known cyber-safe state when an anomaly is detected.{IR-4,IR-4(1),SA-8(16),SA-8(19),SA-8(21),SA-8(24),SI-3,SI-4(7),SI-10(6),SI-13,SI-17} | |
| SPR-36 | The [spacecraft] shall operate securely in off-nominal power conditions, including loss of power and spurious power transients.{SV-AV-6,SV-MA-2}{PE-11,PE-11(1),SA-8(16),SA-8(19),SI-13,SI-17} | Power anomalies may induce undefined states exploitable by attackers. Cryptographic and security mechanisms must not degrade into insecure configurations during brownout or transient conditions. This mitigates fault-induced bypass attacks. Resilient operation preserves trust chain continuity. |
| SPR-39 | The [spacecraft] shall prevent unauthorized and unintended information transfer via shared system resources.{SV-AC-6}{PM-32,SA-8(2),SA-8(5),SA-8(6),SA-8(19),SC-2(2),SC-4} | Shared buses, memory, or peripherals can become covert channels. Controls must prevent unintended information propagation across shared infrastructure. This mitigates cross-partition leakage and data exfiltration. Shared resources must not undermine domain isolation. |
| SPR-40 | The [spacecraft] shall only use communication protocols that support encryption within the mission.{SV-AC-7,SV-CF-1,SV-CF-2}{SA-4(9),SA-8(18),SA-8(19),SC-40(4)} | Protocols lacking encryption create unavoidable exposure. Selecting encryption-capable protocols ensures confidentiality and integrity can be enforced mission-wide. This reduces risk from protocol downgrade attacks. |
| SPR-46 | The [spacecraft] shall monitor [Program‑defined telemetry points] for malicious commanding attempts and alert ground operators upon detection.{SV-AC-2,SV-IT-1,SV-DCO-1}{AC-17,AC-17(1),AC-17(10),AU-3(1),RA-10,SC-7,SC-16,SC-16(2),SC-16(3),SI-3(8),SI-4,SI-4(1),SI-4(13),SI-4(24),SI-4(25),SI-10(6)} | Telemetry-based detection enables identification of anomalous command patterns, replay attempts, and injection attacks. Early detection allows rapid containment before mission impact escalates. Onboard monitoring is critical when ground latency limits intervention. This supports proactive defense. |
| SPR-48 | The [spacecraft] shall implement cryptographic mechanisms to protect the integrity of audit information and audit tools.{SV-DCO-1}{AU-9(3),RA-10,SC-8(1),SI-3,SI-3(10),SI-4(24)} | Audit logs are essential for attribution and forensic analysis. If adversaries can modify audit data, detection and recovery become unreliable. Cryptographic integrity protections preserve evidentiary value. |
| SPR-53 | The [organization] shall employ automated tools that provide notification to ground operators upon discovering discrepancies during integrity verification.{CM-3(5),CM-6,IR-6,IR-6(2),SA-8(21),SC-51,SI-3,SI-4(7),SI-4(12),SI-4(24),SI-7(2)} | |
| SPR-54 | The [spacecraft] shall retain the capability to update/upgrade operating systems while on-orbit.{SV-SP-7}{SA-4(5),SA-8(8),SA-8(31),SA-10(2),SI-3} | The operating system updates should be performed using multi-factor authorization and should only be performed when risk of compromise/exploitation of identified vulnerability outweighs the risk of not performing the update. |
| SPR-55 | The [spacecraft] shall provide cyber threat status to the ground segment for the Defensive Cyber Operations team, per the governing specification.{SV-DCO-1}{IR-5,PM-16,PM-16(1),RA-3(3),RA-10,SI-4,SI-4(1),SI-4(24),SI-7(7)} | The future space enterprises will include full-time Cyber Defense teams supporting space mission systems. Their work is currently focused on the ground segment but may eventually require specific data from the space segment for their successful operation. This requirement is a placeholder to ensure that any DCO-related requirements are taken into consideration for this document. |
| SPR-56 | The [spacecraft] shall provide automated onboard mechanisms that integrate audit review, analysis, and reporting processes to support mission processes for investigation and response to suspicious activities to determine the attack class in the event of a cyber attack.{SV-DCO-1}{AU-6(1),IR-4,IR-4(1),IR-4(12),IR-4(13),PM-16(1),RA-10,SA-8(21),SA-8(22),SC-5(3),SI-3,SI-3(10),SI-4(7),SI-4(24),SI-7(7)} | * Identifying the class (e.g., exfiltration, Trojans, etc.), nature, or effect of cyberattack (e.g., exfiltration, subverted control, or mission interruption) is necessary to determine the type of response. The first order of identification may be to determine whether the event is an attack or a non-threat event (anomaly). The objective requirement would be to predict the impact of the detected signature. * Unexpected conditions can include RF lockups, loss of lock, failure to acquire an expected contact and unexpected reports of acquisition, unusual AGC and ACS control excursions, unforeseen actuator enabling's or actions, thermal stresses, power aberrations, failure to authenticate, software or counter resets, etc. Mitigation might include additional TMONs, more detailed AGC and PLL thresholds to alert operators, auto-capturing state snapshot images in memory when unexpected conditions occur, signal spectra measurements, and expanded default diagnostic telemetry modes to help in identifying and resolving anomalous conditions. |
| SPR-57 | The [spacecraft] shall monitor and collect all onboard cyber- data (from multiple system components), including identification of potential attacks and information about the attack for subsequent analysis.{SV-DCO-1}{AC-6(9),AC-20,AC-20(1),AU-2,AU-12,IR-4,IR-4(1),RA-10,SI-3,SI-3(10),SI-4,SI-4(1),SI-4(2),SI-4(7),SI-4(24)} | The spacecraft will monitor and collect data that provides accountability of activity occurring onboard the spacecraft. Due to resource limitations on the spacecraft, analysis must be performed to determine which data is critical for retention and which can be filtered. Full system coverage of data and actions is desired as an objective; it will likely be impractical due to the resource limitations. “Cyber-relevant data” refers to all data and actions deemed necessary to support accountability and awareness of onboard cyber activities for the mission. This would include data that may indicate abnormal activities, critical configuration parameters, transmissions on onboard networks, command logging, or other such data items. This set of data items should be identified early in the system requirements and design phase. Cyber-relevant data should support the ability to assess whether abnormal events are unintended anomalies or actual cyber threats. Actual cyber threats may rarely or never occur, but non-threat anomalies occur regularly. The ability to filter out cyber threats for non-cyber threats in relevant time would provide a needed capability. Examples could include successful and unsuccessful attempts to access, modify, or delete privileges, security objects, security levels, or categories of information (e.g., classification levels). |
| SPR-58 | The [spacecraft] shall generate cyber related audit records containing information that establishes what type of event occurred, when the event occurred, where the event occurred, the source of the event, and the outcome of the event. For privileged or hazardous commands, the audit record shall include the approver identifiers and the command identifier.{SV-DCO-1}{AU-3,AU-3(1),AU-12,IR-4,IR-4(1),RA-10,SI-3,SI-3(10),SI-4(7),SI-4(24)} | Detailed audit records are essential for attribution, anomaly detection, and post-incident forensic reconstruction. Capturing what occurred, when, where, and by whom enables rapid differentiation between system fault and adversarial activity. Including approver identifiers for privileged or hazardous commands strengthens accountability and insider threat mitigation. Without complete audit context, recovery and containment decisions may be delayed or misinformed. |
| SPR-59 | The [spacecraft] shall attribute cyber attacks and identify unauthorized use of the platform by downlinking onboard cyber information to the mission ground station within [Program‑defined time ≤ 3 minutes].{SV-DCO-1,SV-IT-1,SV-IT-2}{AU-4(1),IR-4,IR-4(1),IR-4(12),IR-4(13),RA-10,SA-8(22),SI-3,SI-3(10),SI-4,SI-4(5),SI-4(7),SI-4(12),SI-4(24)} | Rapid transmission of cyber-relevant telemetry supports near-real-time ground-based fusion and correlation with enterprise security events. Delayed reporting increases risk of adversary persistence or mission degradation. Early attribution enables containment actions before cascading effects occur. Defined timeliness ensures detection capability aligns with operational tempo. |
| SPR-60 | The [spacecraft] shall integrate cyber related detection and responses with existing fault management capabilities to ensure tight integration between traditional fault management and cyber intrusion detection and prevention.{SV-DCO-1}{AU-6(4),IR-4,IR-4(1),RA-10,SA-8(21),SA-8(26),SC-3(4),SI-3,SI-3(10),SI-4(7),SI-4(13),SI-4(16),SI-4(24),SI-4(25),SI-7(7),SI-13} | The onboard IPS system should be integrated into the existing onboard spacecraft fault management system (FMS) because the FMS has its own fault detection and response system built in. SV corrective behavior is usually limited to automated fault responses and ground commanded recovery actions. Intrusion prevention and response methods will inform resilient cybersecurity design. These methods enable detected threat activity to trigger defensive responses and resilient SV recovery. |
| SPR-61 | The [spacecraft] shall protect information obtained from logging/intrusion-monitoring from unauthorized access, modification, and deletion.{SV-DCO-1}{AU-9,AU-9(3),RA-10,SI-4(7),SI-4(24)} | Monitoring data is a high-value target for attackers seeking to evade detection or erase traces of compromise. Protecting log integrity preserves evidentiary value and detection continuity. Unauthorized modification or deletion could mask malicious behavior or delay response. Cryptographic protection and access controls ensure monitoring mechanisms cannot be silently disabled. |
| SPR-62 | The [spacecraft] shall enter a cyber-safe mode when conditions that threaten the platform are detected, enters a cyber-safe mode of operation with restrictions as defined based on the cyber-safe mode.{SV-AV-5,SV-AV-6,SV-AV-7}{CP-10(6),CP-12,CP-13,IR-4,IR-4(1),IR-4(3),PE-10,RA-10,SA-8(16),SA-8(21),SA-8(24),SI-3,SI-4(7),SI-13,SI-17} | Cyber-safe mode provides a deterministic fallback posture when compromise or anomalous conditions threaten mission integrity. Restricting non-essential functions reduces attack surface and prevents further propagation of malicious activity. Defined restrictions ensure predictable behavior under cyber stress conditions. This supports survivability and controlled recovery rather than uncontrolled degradation. |
| SPR-63 | The [spacecraft] shall be able to locate the onboard origin of a cyber attack and alert ground operators within [Program‑defined time ≤ 3 minutes].{SV-DCO-1}{IR-4,IR-4(1),IR-4(12),IR-4(13),RA-10,SA-8(22),SI-3,SI-3(10),SI-4,SI-4(1),SI-4(7),SI-4(12),SI-4(16),SI-4(24)} | The origin of any attack onboard the vehicle should be identifiable to support mitigation. At the very least, attacks from critical element (safety-critical or higher-attack surface) components should be locatable quickly so that timely action can occur. |
| SPR-64 | The [spacecraft] shall detect and deny unauthorized outgoing communications posing a threat to the spacecraft.{SV-DCO-1}{IR-4,IR-4(1),RA-5(4),RA-10,SC-7(9),SC-7(10),SI-4,SI-4(1),SI-4(4),SI-4(7),SI-4(11),SI-4(13),SI-4(24),SI-4(25)} | Outbound communications may indicate data exfiltration, covert channels, or compromised subsystem behavior. Monitoring and blocking unauthorized egress prevents leakage of mission data or cryptographic material. Many attacks rely on command-and-control or data extraction channels; egress control disrupts this persistence mechanism. Outbound traffic should be as tightly controlled as inbound command paths. |
| SPR-65 | The [spacecraft] shall select and execute safe countermeasures against cyber attacks prior to entering cyber-safe mode.{SV-DCO-1}{IR-4,RA-10,SA-8(21),SA-8(24),SI-4(7),SI-17} | These countermeasures are a ready supply of options to triage against the specific types of attack and mission priorities. Minimally, the response should ensure vehicle safety and continued operations. Ideally, the goal is to trap the threat, convince the threat that it is successful, and trace and track the attacker exquisitely—with or without ground aiding. This would support successful attribution and evolving countermeasures to mitigate the threat in the future. “Safe countermeasures” are those that are compatible with the system’s fault management system to avoid unintended effects or fratricide on the system." These countermeasures are likely executed prior to entering into a cyber-safe mode. |
| SPR-66 | The [spacecraft] shall be designed and configured so that encrypted communications traffic and data is visible to on-board security monitoring tools.{SV-DCO-1}{RA-10,SA-8(21),SI-3,SI-3(10),SI-4,SI-4(1),SI-4(10),SI-4(13),SI-4(24),SI-4(25)} | Encryption must not blind onboard intrusion detection capabilities. Security tools require access to sufficient context (pre-encryption or post-decryption inspection points) to detect malicious patterns. Without visibility, encrypted channels become covert channels. Proper architectural placement ensures both confidentiality and detectability are preserved. |
| SPR-67 | The [spacecraft] shall be designed and configured so that spacecraft memory can be monitored by the on-board intrusion detection/prevention capability.{SV-DCO-1}{RA-10,SA-8(21),SI-3,SI-3(10),SI-4,SI-4(1),SI-4(24),SI-16} | Many spacecraft attacks target memory corruption, firmware modification, or unauthorized process injection. Monitoring memory state enables detection of tampering, abnormal writes, or execution anomalies. Memory visibility supports early detection of wiper malware or boot-level compromise. This is essential for protecting deterministic flight software environments. |
| SPR-68 | The [spacecraft] shall have on-board intrusion detection/prevention system that monitors the mission critical components or systems.{SV-AC-1,SV-AC-2,SV-MA-4}{RA-10,SC-7,SI-3,SI-3(8),SI-4,SI-4(1),SI-4(7),SI-4(13),SI-4(24),SI-4(25),SI-10(6)} | The mission critical components or systems could be GNC/Attitude Control, C&DH, TT&C, Fault Management. |
| SPR-69 | The [spacecraft] shall alert in the event of the audit/logging processing failures.{SV-DCO-1}{AU-5,AU-5(1),AU-5(2),SI-3,SI-4,SI-4(1),SI-4(7),SI-4(12),SI-4(24)} | Failure of logging mechanisms may signal active tampering or resource exhaustion attacks. Immediate alerting ensures loss of visibility does not go unnoticed. Silent failure of audit systems creates blind spots exploitable by adversaries. Monitoring the monitors is critical to resilient detection. |
| SPR-70 | The [spacecraft] shall provide an alert immediately to [at a minimum the mission director, administrators, and security officers] when the following failure events occur: [minimally but not limited to: auditing software/hardware errors; failures in the audit capturing mechanisms; and audit storage capacity reaching 95%, 99%, and 100%] of allocated capacity, including security component failover events; alerts shall include component identity, time, and fault reason.{SV-DCO-1}{AU-5,AU-5(1),AU-5(2),SI-4,SI-4(1),SI-4(7),SI-4(12),SI-4(24),SI-7(7)} | Intent is to have human on the ground be alerted to failures. This can be decomposed to SV to generate telemetry and to Ground to alert. |
| SPR-71 | The [spacecraft] shall provide the capability of a cyber “black-box” to capture necessary data for cyber forensics of threat signatures and anomaly resolution when cyber attacks are detected. The [spacecraft] shall automatically route audit events to the alternate audit logging capability upon primary audit failure and shall resynchronize the alternate store to the primary upon recovery.{SV-DCO-1}{AU-5(5),AU-9(2),AU-9(3),AU-12,IR-4(12),IR-4(13),IR-5(1),SI-3,SI-3(10),SI-4,SI-4(1),SI-4(7),SI-4(24),SI-7(7)} | Similar concept of a "black box" on an aircraft where all critical information is stored for post forensic analysis. Black box can be used to record CPU utilization, GNC physical parameters, audit records, memory contents, TT&C data points, etc. The timeframe is dependent upon implementation but needs to meet the intent of the requirement. For example, 30 days may suffice. |
| SPR-72 | The [spacecraft] shall automatically notify ground operators when onboard integrity verification detects discrepancies.{SV-IT-2}{CM-3(5),SA-8(21),SI-3,SI-4(7),SI-4(12),SI-4(24),SI-7(2),SI-7(12)} | Integrity check failures may indicate unauthorized modification, corruption, or hardware faults induced by malicious activity. Automatic notification ensures ground teams can rapidly assess risk and initiate recovery procedures. Delay in reporting increases mission impact. Transparency between onboard detection and ground response is essential for coordinated defense. |
| SPR-73 | The [spacecraft], upon detection of a potential integrity violation, shall provide the capability to [audit the event and alert ground operators].{SV-DCO-1}{CM-3(5),SA-8(21),SI-3,SI-4(7),SI-4(12),SI-4(24),SI-7(8)} | One example would be for bad commands where the system would reject the command and not increment the Vehicle Command Counter (VCC) and include the information in telemetry. |
| SPR-74 | The [organization] shall define the security safeguards that are to be automatically employed when integrity violations are discovered.{SV-IT-2}{CP-2,SA-8(21),SI-3,SI-4(7),SI-4(12),SI-7(5),SI-7(8)} | Predefined safeguards ensure consistent and timely response to detected integrity violations. Ad hoc response increases uncertainty and recovery time. Automated actions may include isolation, reconstitution from gold images, or transition to cyber-safe mode. Defined response paths improve resilience and reduce operator burden during crisis. |
| SPR-75 | The [organization] shall define acceptable secure communication protocols available for use within the mission in accordance with applicable federal laws, Executive Orders, directives, policies, regulations, and standards.{SV-AC-7}{SA-4(9)} | The secure communication protocol should include "strong" authenticated encryption characteristics. |
| SPR-76 | The [spacecraft] shall only use [organization]-defined communication protocols within the mission.{SV-AC-7}{SA-4(9)} | Restricting protocols prevents introduction of undocumented or insecure communication paths. Unapproved protocols may lack encryption, replay protection, or monitoring integration. Standardization reduces attack surface and simplifies validation. Controlled protocol selection strengthens supply chain and integration assurance. |
| SPR-77 | The [spacecraft] shall employ the principle of least privilege, allowing only authorized accesses processes which are necessary to accomplish assigned tasks in accordance with system functions.{SV-AC-6}{AC-3,AC-6,AC-6(9),CA-9,CM-5,CM-5(5),CM-5(6),SA-8(2),SA-8(5),SA-8(6),SA-8(14),SA-8(23),SA-17(7),SC-2,SC-7(29),SC-32,SC-32(1),SI-3} | Least privilege limits damage from compromised processes or insider misuse. Processes receive only the minimum access necessary for assigned functions. This reduces lateral movement and privilege escalation pathways. In deterministic spacecraft systems, privilege boundaries must be tightly defined and enforced. |
| SPR-78 | The [spacecraft] shall provide independent mission/cyber critical threads such that any one credible event will not corrupt another mission/cyber critical thread.{SV-AC-6,SV-MA-3,SV-SP-7}{SC-3,SC-32,SC-32(1),SI-3,SI-13} | Segregating mission-critical and cyber-critical execution paths prevents a single failure or compromise from corrupting other critical functions. Thread independence supports fault containment and resilience under attack. This ensures availability of essential functions even during partial compromise. Isolation strengthens both safety and cybersecurity. |
| SPR-88 | The [spacecraft] shall detect and recover from detected memory errors or transitions to a known cyber-safe state.{SV-IT-4,SV-AV-6}{IR-4,IR-4(1),SA-8(16),SA-8(24),SI-3,SI-4(7),SI-10(6),SI-13,SI-17} | Memory corruption may result from radiation, fault injection, or malicious manipulation. Detection prevents silent data corruption from propagating to mission-critical functions. Recovery mechanisms or safe-state transitions preserve availability. Rapid containment supports mission survivability. |
| SPR-91 | The [spacecraft] shall prevent the installation of Flight Software without verification that the component has been digitally signed.{SV-SP-1,SV-SP-3,SV-SP-6,SV-SP-9}{CM-3,CM-3(8),CM-5,CM-5(3),CM-14,SA-8(8),SA-8(31),SA-10(2),SI-3,SI-7(12),SI-7(15)} | Requiring digital signature verification before installing flight software prevents unauthorized, malicious, or tampered code from being introduced into the spacecraft environment. Software supply chain compromise is a high-impact attack vector that can result in persistent control or loss of mission. Cryptographic validation ensures only approved and trusted binaries are executed. This maintains integrity of the trusted computing baseline. |
| SPR-97 | All [spacecraft] commands which have unrecoverable consequence must have dual authentication prior to command execution. The [spacecraft] shall verify two independent cryptographic approvals prior to execution and shall generate an audit record binding both approver identifiers to the command identifier, time, and outcome.{SV-AC-4,SV-AC-8,SV-AC-2}{AU-9(5),IA-3,IA-4,IA-10,PE-3,PM-12,SA-8(15),SA-8(21),SC-16(2),SC-16(3),SI-3(8),SI-3(9),SI-4(13),SI-4(25),SI-7(12),SI-10(6),SI-13} | Commands with irreversible impact require heightened assurance to prevent catastrophic mission loss. Dual independent cryptographic approvals mitigate insider threat, key compromise, and single-point credential abuse. Binding approver identifiers to the audit trail strengthens accountability and deterrence. This reduces the probability of unauthorized hazardous command execution. |
| SPR-98 | The [spacecraft] shall have a method to ensure the integrity of which have unrecoverable consequence and validate their authenticity before execution.{SV-AC-2,SV-IT-2,SV-IT-1}{AU-9(5),IA-3,IA-4,IA-10,PE-3,PM-12,SA-8(15),SA-8(21),SC-16(2),SC-16(3),SI-3(8),SI-3(9),SI-4(13),SI-4(25),SI-7(12),SI-10(6),SI-13} | Hazardous commands must be cryptographically protected and validated prior to execution. Integrity and authenticity checks prevent replay, modification, or injection of destructive instructions. Without validation, RF interception or command path compromise could result in mission-ending actions. This ensures critical commands are both authorized and unaltered. |
| SPR-99 | The [spacecraft] shall recover from cyber-safe mode to mission operations within 20 minutes.{SV-MA-5}{CP-2(3),CP-2(5),IR-4,SA-8(24)} | Upon conclusion of addressing the threat, the system should be capable of recovering from the minimal survival mode back into a mission-ready state within defined timelines. The intent is to define the timelines and the capability to return back to mission operations. |
| SPR-106 | The [spacecraft] shall provide non-identical methods, or functionally independent methods, for commanding a mission critical function when the software is the sole control of that function.{AC-3(2),SI-3(8),SI-13} | |
| SPR-107 | The [spacecraft] shall have multiple uplink paths {SV-AV-1}{CP-8,CP-11,SA-8(18),SC-5,SC-47} | Redundant uplink paths preserve command capability during jamming, interference, or subsystem failure. Availability is a core mission assurance objective. Diverse communication channels reduce single-point failure risk. This enhances resiliency in contested RF environments. |
| SPR-108 | The [organization] shall define the resources to be allocated to protect the availability of system resources.{SV-AC-6}{CP-2(2),SC-6} | Availability protections require deliberate allocation of compute, power, bandwidth, and monitoring capacity. Without predefined resource allocation, defensive measures may compete with mission operations. Planning ensures resilience mechanisms do not degrade core functionality. This supports continuity during denial-of-service conditions. |
| SPR-109 | The [spacecraft] shall be constructed with electromagnetic shielding to protect electronic components from damage to the degree deemed acceptable. Verification for EMP/HANE shall be distinct from EMSEC/TEMPEST, anti‑jam/anti‑spoof, and EMI/EPM protections.{SV-MA-2,SV-IT-4}{PE-9,PE-14,PE-18,PE-21} | EMP and HANE events can induce systemic failures independent of cyber exploitation. Shielding protects electronics from catastrophic damage and fault-induced vulnerabilities. Distinguishing EMP/HANE from EMSEC and anti-jam ensures correct threat modeling and verification. Physical resilience complements cyber defenses. |
| SPR-117 | The [spacecraft] shall provide the capability to restrict command lock based on geographic location of ground stations.{SV-AC-1}{AC-2(11),IA-10,SI-4(13),SI-4(25)} | This could be performed using command lockout based upon when the spacecraft is over selected regions. This should be configurable so that when conflicts arise, the Program can update. The goal is so the spacecraft won't accept a command when the spacecraft determines it is in a certain region. |
| SPR-131 | The [spacecraft] shall identify and reject commands received out-of-sequence when the out-of-sequence commands can cause a hazard/failure or degrade the control of a hazard or mission.{SV-AC-2,SV-AV-4}{SC-16(2),SI-4(13),SI-4(25),SI-10,SI-10(6),SI-13} | Command sequencing enforces operational logic and safety interlocks. Out-of-sequence commands may bypass safeguards. Sequence enforcement prevents replay and control manipulation. This preserves control flow integrity. |
| SPR-141 | The [spacecraft] shall perform prerequisite checks for the execution of hazardous commands.{SI-10,SI-10(6),SI-13} | |
| SPR-144 | The [spacecraft] shall validate a functionally independent parameter prior to the issuance of any sequence that could remove an inhibit, or perform a hazardous action.{SV-AC-8,SV-MA-3}{SI-10(3),SI-10(6),SI-13} | Redundant validation mechanisms ensure hazardous transitions cannot occur through single-point compromise. Independent parameters strengthen control integrity. This reduces exploit paths for inhibit removal. Critical operations demand dual validation logic. |
| SPR-186 | The [spacecraft] shall have fault-tolerant authoritative time sourcing for the platform's clock.{SV-IT-1}{AU-8(2),SC-45,SC-45(1),SC-45(2),SI-13} | * Adopt voting schemes (triple modular redundancy) that include inputs from backup sources. Consider providing a second reference frame against which short-term changes or interferences can be compared. * Atomic clocks, crystal oscillators and/or GPS receivers are often used as time sources. GPS should not be used as the only source due to spoofing/jamming concerns. |
| SPR-203 | The [spacecraft] shall have failure tolerance on sensors used by software to make mission-critical decisions.{SV-MA-3,SV-AV-7}{SI-13,SI-17} | Sensor compromise or failure must not directly lead to hazardous action. Redundancy and validation ensure trustworthy inputs. Independent verification reduces risk of manipulation. Critical decisions require reliable sensing. |
| SPR-229 | The [organization] shall protect documentation and Controlled Unclassified Information (CUI) as required, in accordance with the risk management strategy.{SV-CF-3,SV-SP-4,SV-SP-10}{AC-3,CM-12,CP-2,PM-17,RA-5(4),SA-3,SA-3(1),SA-5,SA-10,SC-8(1),SC-28(3),SI-12} | Documentation may reveal architecture details exploitable by adversaries. Proper handling prevents leakage. Protection of CUI supports regulatory compliance. Information governance complements technical controls. |
| SPR-230 | The [organization] shall identify and properly classify mission sensitive design/operations information and access control shall be applied in accordance with classification guides and applicable federal laws, Executive Orders, directives, policies, regulations, and standards.{SV-CF-3,SV-AV-5}{AC-3,CM-12,CP-2,PM-17,RA-5(4),SA-3,SA-3(1),SA-5,SA-8(19),SC-8(1),SC-28(3),SI-12} | * Mission sensitive information should be classified as Controlled Unclassified Information (CUI) or formally known as Sensitive but Unclassified. Ideally these artifacts would be rated SECRET or higher and stored on classified networks. Mission sensitive information can typically include a wide range of candidate material: the functional and performance specifications, the RF ICDs, databases, scripts, simulation and rehearsal results/reports, descriptions of uplink protection including any disabling/bypass features, failure/anomaly resolution, and any other sensitive information related to architecture, software, and flight/ground /mission operations. This could all need protection at the appropriate level (e.g., unclassified, SBU, classified, etc.) to mitigate levels of cyber intrusions that may be conducted against the project’s networks. Stand-alone systems and/or separate database encryption may be needed with controlled access and on-going Configuration Management to ensure changes in command procedures and critical database areas are tracked, controlled, and fully tested to avoid loss of science or the entire mission. |
| SPR-231 | The [organization] shall distribute documentation to only personnel with defined roles and a need to know.{SV-CF-3,SV-AV-5}{CM-12,CP-2,SA-5,SA-10} | Least privilege and need to know should be employed with the protection of all documentation. Documentation can contain sensitive information that can aid in vulnerability discovery, detection, and exploitation. For example, command dictionaries for ground and space systems should be handles with extreme care. Additionally, design documents for missions contain many key elements that if compromised could aid in an attacker successfully exploiting the system. |
| SPR-232 | The [organization] shall conduct a criticality analysis to identify mission critical functions and critical components and reduce the vulnerability of such functions and components through secure system design.{SV-SP-3,SV-SP-4,SV-AV-7,SV-MA-4}{CP-2,CP-2(8),PL-7,PM-11,PM-30(1),RA-3(1),RA-9,SA-8(9),SA-8(11),SA-8(25),SA-12,SA-14,SA-15(3),SC-7(29),SR-1} | During SCRM, criticality analysis will aid in determining supply chain risk. For mission critical functions/components, extra scrutiny must be applied to ensure supply chain is secured. |
| SPR-233 | The [organization] shall identify the applicable physical and environmental protection policies covering the development environment and spacecraft hardware. {SV-SP-4,SV-SP-5,SV-SP-10}{PE-1,PE-14,SA-3,SA-3(1),SA-10(3)} | Development environments must be protected from tampering. Physical controls prevent hardware supply chain compromise. Policy clarity ensures consistent safeguards. Secure development underpins secure deployment. |
| SPR-234 | The [organization] shall develop and document program-specific identification and authentication policies for accessing the development environment and spacecraft. {SV-SP-10,SV-AC-4}{AC-3,AC-14,IA-1,SA-3,SA-3(1)} | Strong authentication prevents unauthorized development access. Development compromise can introduce malicious code. Documented policies ensure consistent enforcement. Identity governance supports supply chain integrity. |
| SPR-235 | The [organization] shall ensure security requirements/configurations are placed in accordance with NIST 800-171 with enhancements in 800-172 on the development environments to prevent the compromise of source code from supply chain or information leakage perspective.{SV-SP-4,SV-SP-10,SV-CF-3}{AC-3,SA-3,SA-3(1),SA-15} | Supply chain threats target development environments. Enhanced controls reduce risk of source code exfiltration. Compliance strengthens contractual and regulatory assurance. Development security directly impacts spacecraft integrity. |
| SPR-236 | The [organization] shall implement a verifiable flaw remediation process into the developmental and operational configuration management process.{SV-SP-1,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{CA-2,CA-5,SA-3,SA-3(1),SA-11,SI-3,SI-3(10)} | The verifiable process should also include a cross reference to mission objectives and impact statements. Understanding the flaws discovered and how they correlate to mission objectives will aid in prioritization. |
| SPR-237 | The [organization] shall establish robust procedures and technical methods to perform testing to include adversarial testing (i.e.abuse cases) of the platform hardware and software.{SV-SP-2,SV-SP-1}{CA-8,CP-4(5),RA-5,RA-5(1),RA-5(2),SA-3,SA-4(3),SA-11,SA-11(1),SA-11(2),SA-11(5),SA-11(7),SA-11(8),SA-15(7)} | Abuse-case testing reveals design weaknesses before deployment. Red-teaming strengthens defensive posture. Proactive validation reduces operational risk. Testing must simulate realistic threat scenarios. |
| SPR-238 | The [organization] shall require subcontractors developing information system components or providing information system services (as appropriate) to demonstrate the use of a system development life cycle that includes [state-of-the-practice system/security engineering methods, software development methods, testing/evaluation/validation techniques, and quality control processes].{SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-9}{SA-3,SA-4(3)} | Select the particular subcontractors, software vendors, and manufacturers based on the criticality analysis performed for the Program Protection Plan and the criticality of the components that they supply. Examples of good security practices would be using defense-in-depth tactics across the board, least-privilege being implemented, two factor authentication everywhere possible, using DevSecOps, implementing and validating adherence to secure coding standards, performing static code analysis, component/origin analysis for open source, fuzzing/dynamic analysis with abuse cases, etc. |
| SPR-244 | The [organization] shall define the secure communication protocols to be used within the mission in accordance with applicable federal laws, Executive Orders, directives, policies, regulations, and standards.{SV-AC-7,SV-CF-1}{PL-7,RA-5(4),SA-4(9),SA-8(18),SA-8(19),SC-8(1),SC-16(3),SC-40(4),SI-12} | Standardized secure protocols reduce interoperability risk. Alignment with federal standards ensures validated cryptography. Defined protocols prevent ad hoc insecure implementations. Governance strengthens communication assurance. |
| SPR-245 | The [organization] shall define processes and procedures to be followed when integrity verification tools detect unauthorized changes to software, firmware, and information.{SV-IT-2}{CM-3,CM-3(1),CM-3(5),CM-5(6),CM-6,CP-2,IR-6,IR-6(2),PM-30,SC-16(1),SC-51,SI-3,SI-4(7),SI-4(24),SI-7,SI-7(7),SI-7(10)} | Predefined response procedures reduce reaction time. Clear escalation paths improve containment. Consistent handling prevents confusion during incidents. Preparedness strengthens resilience. |
| SPR-246 | The [organization] shall ensure that all Electrical, Electronic, Electro-mechanical & Electro-optical (EEEE) and mechanical piece parts procured from the Original Component Manufacturer (OCM) or their authorized distribution network.{SA-8(9),SA-8(11),SA-12,SA-12(1),SC-16(1),SR-1,SR-5} | |
| SPR-248 | The [organization] shall employ Operations Security (OPSEC) safeguards to protect supply chain-related information for the system, system components, or system services. {CP-2(8),PM-30,SA-12(9),SC-38,SR-7} | Supply chain information can reveal vulnerabilities. OPSEC reduces adversary intelligence gathering. Controlled disclosure minimizes targeting risk. Information discipline strengthens strategic defense. |
| SPR-249 | The [organization] shall employ [Program-defined Operations Security (OPSEC) safeguards] to protect supply chain-related information for the system, system components, or system services.{SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11}{CP-2(8),PM-30,SA-12(9),SC-38,SR-7} | OPSEC safeguards may include: (1) Limiting the disclosure of information needed to design, develop, test, produce, deliver, and support the element for example, supplier identities, supplier processes, potential suppliers, security requirements, design specifications, testing and evaluation result, and system/component configurations, including the use of direct shipping, blind buys, etc.; (2) Extending supply chain awareness, education, and training for suppliers, intermediate users, and end users; (3) Extending the range of OPSEC tactics, techniques, and procedures to potential suppliers, contracted suppliers, or sub-prime contractor tier of suppliers; and (4) Using centralized support and maintenance services to minimize direct interactions between end users and original suppliers. |
| SPR-251 | The [organization] shall maintain evidence of the execution of the security assessment plan and the results of the security testing/evaluation.{SV-SP-1,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{CA-2,CA-8,SA-11} | Documented evidence provides traceability and accountability for security testing activities. Without retained artifacts, organizations cannot demonstrate due diligence or validate corrective actions. Preserved results support audits, mission reviews, and lessons learned. This strengthens governance and compliance posture. |
| SPR-252 | The [organization] shall create and implement a security assessment plan that includes: (1) The types of analyses, testing, evaluation, and reviews of all software and firmware components; (2) The degree of rigor to be applied to include abuse cases and/or penetration testing; and (3) The types of artifacts produced during those processes.{SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{CA-2,CA-8,SA-11,SA-11(5)} | The security assessment plan should include evaluation of mission objectives in relation to the security of the mission. Assessments should not only be control based but also functional based to ensure mission is resilient against failures of controls. |
| SPR-253 | The [organization] shall coordinate penetration testing on mission critical spacecraft components (hardware and/or software).{SV-MA-4}{CA-8,CA-8(1),CP-4(5)} | Not all defects (i.e., buffer overflows, race conditions, and memory leaks) can be discovered statically and require execution of the system. This is where space-centric cyber testbeds (i.e., cyber ranges) are imperative as they provide an environment to maliciously attack components in a controlled environment to discover these undesirable conditions. Technology has improved to where digital twins for spacecraft are achievable, which provides an avenue for cyber testing that was often not performed due to perceived risk to the flight hardware. |
| SPR-254 | The [organization] shall employ dynamic analysis (e.g.using simulation, penetration testing, fuzzing, etc.) to identify software/firmware weaknesses and vulnerabilities in developed and incorporated code (open source, commercial, or third-party developed code).{SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{CA-8,CM-10(1),RA-3(1),SA-11(5),SA-11(8),SA-11(9),SI-3,SI-7(10)} | Dynamic testing uncovers runtime vulnerabilities not visible through static review. Techniques such as fuzzing and penetration testing simulate realistic adversarial behavior. Runtime validation improves detection of memory corruption, logic flaws, and unsafe state transitions. This reduces latent vulnerabilities prior to deployment. |
| SPR-255 | The [organization] shall employ independent third-party analysis and penetration testing of all software (COTS, FOSS, Custom) associated with the system, system components, or system services.{SV-SP-1,SV-SP-3,SV-SP-6}{CA-2,CA-2(1),CA-8(1),CM-10(1),SA-9,SA-11(3),SA-12(11),SI-3,SI-3(10),SR-4(4),SR-6(1)} | Independent assessment reduces bias and uncovers blind spots in internal reviews. External testers provide objective validation of system resilience. Independent penetration testing strengthens confidence in defensive posture. Separation of duties enhances credibility and assurance. |
| SPR-257 | The [organization] shall analyze changes to the spacecraft to determine potential security impacts prior to change implementation.{SV-MA-6,SV-SP-9}{CM-4,CM-3,CM-3(2),CM-3(7),CM-4(2),SA-10} | Changes to spacecraft configuration may introduce unintended vulnerabilities. Pre-implementation impact analysis prevents security regression. Structured review ensures modifications align with risk tolerance. Change control supports mission assurance. |
| SPR-259 | The [organization] shall develop an incident response and forensics plan that covers the spacecrafts.{SV-MA-5}{CP-2,IR-1,IR-3,IR-3(2),IR-4(12),IR-4(13),IR-8,SA-15(10),SI-4(24)} | A structured response plan enables coordinated containment and recovery. Forensics planning ensures evidence preservation. Defined procedures reduce confusion during crisis. Incident readiness enhances resilience. |
| SPR-262 | The [organization] includes security awareness training on recognizing and reporting potential indicators of insider threat.{SV-AC-4}{AT-2(2),IR-4(6),IR-6,IR-6(2),PM-16} | Authorized users present significant risk vectors. Awareness training improves detection of anomalous behavior. Early reporting reduces insider dwell time. Human vigilance complements technical controls. |
| SPR-263 | The [organization] shall provide training to its personnel on how to identify and respond to malicious code indicators to include but not limited to indicators of potentially malicious code in flight software, indicators from development machine’s anti-virus/anti-malware software of potential malicious code, and to recognize suspicious communications and anomalous behavior in [organization] information systems.{SV-SP-3,SV-SP-10}{AT-3(4),IR-6,IR-6(2),SI-4(24)} | Personnel must recognize signs of compromised flight or development systems. Early detection prevents propagation into mission assets. Training strengthens defense across lifecycle stages. Awareness reduces supply chain exposure. |
| SPR-264 | The [organization] shall report counterfeit information system components to [organization] officials. {SV-SP-4}{IR-6,IR-6(2),PM-30,SA-19,SR-11} | Counterfeit components may contain malicious implants or reliability risks. Reporting ensures centralized tracking and mitigation. Early notification prevents systemic exposure. Hardware integrity underpins mission assurance. |
| SPR-265 | The [organization] shall report identified systems or system components containing software affected by recently announced cybersecurity-related software flaws (and potential vulnerabilities resulting from those flaws) to [organization] officials with cybersecurity responsibilities.{SV-SP-1,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-11}{IR-6,IR-6(2),SI-2,SI-3,SI-4(12),SR-4(4)} | Rapid reporting of vulnerable components enables proactive remediation. Awareness of newly disclosed flaws prevents exploitation. Coordination ensures mission-wide response. Visibility reduces systemic risk. |
| SPR-266 | The [organization] shall determine the vulnerabilities/weaknesses that require remediation, and coordinate the timeline for that remediation, in accordance with the analysis of the vulnerability scan report, the mission assessment of risk, and mission needs.{SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{CA-5,CM-3,RA-5,RA-7,SI-3,SI-3(10)} | Not all vulnerabilities carry equal mission impact. Risk-informed prioritization ensures critical flaws are addressed first. Coordinated timelines balance mission needs with security posture. Structured remediation strengthens governance. |
| SPR-267 | The [organization] shall perform software component analysis (a.k.a.origin analysis) for developed or acquired software.{SV-SP-4,SV-SP-6}{CM-10,CM-10(1),RA-3(1),RA-5,SA-15(7),SI-3,SI-3(10),SR-4(4)} | Origin analysis identifies embedded third-party libraries and dependencies. Transparency reduces supply chain opacity. Knowing component lineage enables targeted vulnerability tracking. This mitigates inherited risk. |
| SPR-272 | The [organization] shall perform static binary analysis of all firmware that is utilized on the spacecraft.{SV-SP-7,SV-SP-11}{RA-5,SA-10,SA-11,SI-7(10)} | Many commercial products/parts are utilized within the system and should be analyzed for security weaknesses. Blindly accepting the firmware is free of weakness is unacceptable for high assurance missions. The intent is to not blindly accept firmware from unknown sources and assume it is secure. This is meant to apply to firmware the vendors are not developing internally. In-house developed firmware should be going through the vendor's own testing program and have high assurance it is secure. When utilizing firmware from other sources, "expecting" does not meet this requirement. Each supplier needs to provide evidence to support that claim that their firmware they are getting is genuine and secure. |
| SPR-277 | In coordination with [organization], the [organization] shall prioritize and remediate flaws identified during security testing/evaluation.{SV-SP-1,SV-SP-3}{CA-2,CA-5,SA-11,SI-3,SI-3(10)} | Timely remediation reduces exploitation window. Coordination ensures mission continuity during patching. Documented prioritization demonstrates due diligence. Structured response enhances accountability. |
| SPR-278 | The [organization] shall correct flaws identified during security testing/evaluation.{SV-SP-1,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{SA-11} | Flaws that impact the mission objectives should be prioritized. |
| SPR-279 | The [organization] shall perform [Selection (one or more): unit; integration; system; regression] testing/evaluation at [Program-defined depth and coverage].{SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{SA-11} | The depth needs to include functional testing as well as negative/abuse testing. |
| SPR-280 | The [organization] shall require the developer of the system, system component, or system service to deliver the system, component, or service with [Program-defined security configurations] implemented.{SV-SP-1,SV-SP-9}{SA-4(5)} | For the spacecraft FSW, the defined security configuration could include to ensure the software does not contain a pre-defined list of Common Weakness Enumerations (CWEs)and/or CAT I/II Application STIGs. |
| SPR-281 | The [organization] shall have an Insider Threat Program to aid in the detection and prevention of people with authorized access to perform malicious activities.{SV-AC-4}{AT-2(2),IR-4(6),IR-4(7),PM-12,PM-16} | Formal insider programs provide monitoring, reporting, and mitigation mechanisms. Behavioral analysis strengthens early detection. Structured governance reduces insider impact. Policy-backed programs improve deterrence. |
| SPR-282 | The [organization] shall use all-source intelligence analysis of suppliers and potential suppliers of the information system, system components, or system services to inform engineering, acquisition, and risk management decisions.{SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11}{PM-16,PM-30,RA-2,RA-3(1),RA-3(2),RA-7,SA-9,SA-12(8),SR-5(2)} | * The Program should also consider sub suppliers and potential sub suppliers. * All-source intelligence of suppliers that the organization may use includes: (1) Defense Intelligence Agency (DIA) Threat Assessment Center (TAC), the enterprise focal point for supplier threat assessments for the DOD acquisition community risks; (2) Other U.S. Government resources including: (a) Government Industry Data Exchange Program (GIDEP) – Database where government and industry can record issues with suppliers, including counterfeits; and (b) System for Award Management (SAM) – Database of companies that are barred from doing business with the US Government. |
| SPR-283 | The [organization] shall request threat analysis of suppliers of critical components and manage access to and control of threat analysis products containing U.S.person information.{SV-SP-3,SV-SP-4,SV-SP-11}{PM-16,PM-30(1),RA-3(1),SA-9,SA-12,SR-1} | The intent of this requirement is to address supply chain concerns on hardware and software vendors. Not required for trusted suppliers accredited to the Defense Microelectronic Activity (DMEA). If the Program intends to use a supplier not accredited by DMEA, the government customer should be notified as soon as possible. If the Program has internal processes to vet suppliers, it may meet this requirement. All software used and its origins must be included in the SBOM and be subjected to internal and Government vulnerability scans. |
| SPR-284 | The [organization] shall use all-source intelligence analysis on threats to mission critical capabilities and/or system components to inform risk management decisions.{SV-MA-4}{PM-16,RA-3(2),RA-3(3),RA-7,RA-9,SA-12(8),SA-15(8)} | Intelligence-informed risk management anticipates adversary capabilities. External threat awareness improves proactive defense. Integration into decision-making strengthens resilience. Threat-informed design reduces reactive posture. |
| SPR-285 | The [organization] risk assessment shall include the full end to end communication pathway (i.e., round trip) to include any crosslink communications.{SV-MA-4}{AC-20,AC-20(1),AC-20(3),RA-3,SA-8(18)} | Full pathway analysis prevents overlooking intermediate segments. Crosslinks may introduce lateral risk exposure. Round-trip evaluation strengthens confidentiality and integrity assurance. Holistic view reduces blind spots. |
| SPR-286 | The [organization] shall conduct an assessment of risk prior to each milestone review [SRR\PDR\CDR], including the likelihood and magnitude of harm, from the unauthorized access, use, disclosure, disruption, modification, or destruction of the platform and the information it processes, stores, or transmits.{SV-MA-4}{RA-2,RA-3,SA-8(25)} | Major design decisions must reflect updated threat posture. Pre-milestone risk review prevents costly redesign. Structured evaluation supports informed governance. Early risk integration enhances mission confidence. |
| SPR-287 | The [organization] shall document risk assessment results in [risk assessment report].{SV-MA-4}{RA-3} | Formal documentation preserves rationale for decisions. Traceability enables future reassessment. Written records support compliance. Documentation strengthens transparency. |
| SPR-288 | The [organization] shall review risk assessment results [At least annually if not otherwise defined in formal organizational policy].{SV-MA-4}{RA-3} | Periodic review ensures evolving threats are considered. Regular reassessment prevents stagnation. Continuous evaluation supports adaptive defense. Governance must be iterative. |
| SPR-289 | The [organization] shall update the risk assessment [At least annually if not otherwise defined in formal institutional policy] or whenever there are significant changes to the information system or environment of operation (including the identification of new threats and vulnerabilities), or other conditions that may impact the security state of the spacecraft.{SV-MA-4}{RA-3} | System modifications alter risk posture. Immediate reassessment ensures continued compliance. Responsive review strengthens mission assurance. Risk management must be dynamic. |
| SPR-290 | The [organization] shall document risk assessment results in risk assessment report upon completion of each risk assessment.{SV-MA-6}{RA-3,RA-7} | Formal documentation preserves rationale for decisions. Traceability enables future reassessment. Written records support compliance. Documentation strengthens transparency. |
| SPR-291 | The [organization] shall use the threat and vulnerability analyses of the as-built system, system components, or system services to inform and direct subsequent testing/evaluation of the as-built system, component, or service.{SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{RA-3(3),SA-11(2),SA-15(8),SI-3} | Security analysis should guide test design. Threat-informed evaluation improves relevance. Feedback loops strengthen defensive posture. Analytical alignment enhances coverage. |
| SPR-292 | The [organization] shall ensure that role-based security-related training is provided to personnel with assigned security roles and responsibilities: (i) before authorizing access to the system or performing assigned duties; (ii) when required by system changes; and (iii) at least annually thereafter.{SV-AC-4}{AT-3,CP-2} | Personnel must understand role-specific responsibilities. Tailored training reduces misuse. Continuous reinforcement maintains awareness. Human factors are central to defense. |
| SPR-293 | The [organization] shall employ techniques to limit harm from potential adversaries identifying and targeting the [organization]s supply chain.{SV-SP-4,SV-SP-5,SV-SP-6}{CP-2,PM-30,SA-9,SA-12(5),SC-38,SR-3,SR-3(1),SR-3(2),SR-5(2)} | Adversaries often exploit supplier relationships. Protective measures reduce reconnaissance and manipulation. Supply chain resilience strengthens mission integrity. Proactive defense mitigates systemic exposure. |
| SPR-299 | The [organization] shall develop, document, and maintain under configuration control, a current baseline configuration of the spacecrafts.{SV-SP-9,SV-MA-6}{CM-2,CM-3(7),CM-4(2),CM-6,SA-8(30),SA-10} | Configuration control ensures traceability of hardware and software states. Unauthorized changes undermine security posture. Accurate baselines enable recovery and audit. Governance depends on configuration integrity. |
| SPR-300 | The [organization] shall maintain the integrity of the mapping between the master build data (hardware drawings and software/firmware code) describing the current version of hardware, software, and firmware and the on-site master copy of the data for the current version.{SV-SP-4,SV-SP-9}{CM-6,SA-8(21),SA-8(30),SA-10,SA-10(3),SA-10(4),SA-10(5),SI-7(10),SR-4(4)} | Build data linkage ensures reproducibility and traceability. Tampering detection depends on accurate mapping. Integrity of master copies prevents unauthorized modification. Configuration discipline supports resilience. |
| SPR-301 | The [organization] shall develop a security plan for the spacecraft.{SV-MA-6}{PL-2,PL-7,PM-1,SA-8(29),SA-8(30)} | A comprehensive security plan aligns controls with mission objectives. Clear articulation ensures consistent implementation. Planning integrates security into operations. Formal documentation strengthens accountability. |
| SPR-302 | The [organization] shall document the platform's security architecture, and how it is established within and is an integrated part of the overall [organization] mission security architecture.{SV-MA-6,SV-MA-4}{PL-7,SA-8(7),SA-8(13),SA-8(29),SA-8(30),SA-17} | Architecture documentation provides structural clarity. Integration into enterprise mission security ensures alignment. Clear documentation reduces misinterpretation. Transparency strengthens lifecycle governance. |
| SPR-303 | The [organization] shall protect the security plan from unauthorized disclosure and modification.{SV-MA-6}{AC-3,PL-2,PL-7} | Exposure of architecture details increases adversary advantage. Protecting documentation reduces reconnaissance risk. Controlled access ensures integrity. Governance must secure sensitive planning artifacts. |
| SPR-304 | The [organization] shall maintain a list of suppliers and potential suppliers used, and the products that they supply to include software.{SV-SP-3,SV-SP-4,SV-SP-11}{CM-10,PL-8(2),PM-30,SA-8(9),SA-8(11)} | Ideally you have diversification with suppliers |
| SPR-305 | The [organization] shall develop and implement anti-counterfeit policy and procedures designed to detect and prevent counterfeit components from entering the information system, including support tamper resistance and provide a level of protection against the introduction of malicious code or hardware.{SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11}{CM-3(8),CM-7(9),PM-30,SA-8(9),SA-8(11),SA-9,SA-10(3),SA-19,SC-51,SR-4(3),SR-4(4),SR-5(2),SR-11} | Counterfeit hardware may embed malicious implants. Formal policies reduce infiltration risk. Supplier verification strengthens trust. Hardware authenticity is foundational to cybersecurity. |
| SPR-306 | The [organization] shall conduct a supplier review prior to entering into a contractual agreement with a sub [organization] to acquire systems, system components, or system services.{SV-SP-4,SV-SP-6}{PM-30,PM-30(1),RA-3(1),SA-8(9),SA-8(11),SA-9,SA-12(2),SR-5(2),SR-6} | Pre-contract review ensures vendor security posture. Due diligence reduces third-party risk exposure. Structured evaluation strengthens procurement governance. Supplier trust must be verified. |
| SPR-307 | The [organization] shall maintain documentation tracing the strategies, tools, and methods implemented to mitigate supply chain risk .{SV-SP-3,SV-SP-4,SV-AV-7}{PM-30,RA-3(1),SA-12(1),SR-5} | Examples include: (1) Transferring a portion of the risk to the developer or supplier through the use of contract language and incentives; (2) Using contract language that requires the implementation of SCRM throughout the system lifecycle in applicable contracts and other acquisition and assistance instruments (grants, cooperative agreements, Cooperative Research and Development Agreements (CRADAs), and other transactions). Within the DOD some examples include: (a) Language outlined in the Defense Acquisition Guidebook section 13.13. Contracting; (b) Language requiring the use of protected mechanisms to deliver elements and data about elements, processes, and delivery mechanisms; (c) Language that articulates that requirements flow down supply chain tiers to sub-prime suppliers. (3) Incentives for suppliers that: (a) Implement required security safeguards and SCRM best practices; (b) Promote transparency into their organizational processes and security practices; (c) Provide additional vetting of the processes and security practices of subordinate suppliers, critical information system components, and services; and (d) Implement contract to reduce SC risk down the contract stack. (4) Gaining insight into supplier security practices; (5) Using contract language and incentives to enable more robust risk management later in the lifecycle; (6) Using a centralized intermediary or “Blind Buy” approaches to acquire element(s) to hide actual usage locations from an untrustworthy supplier or adversary; |
| SPR-308 | The [organization] shall protect against supply chain threats to the system, system components, or system services by employing security safeguards as defined by NIST SP 800-161 Rev.1.{SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11}{PM-30,RA-3(1),SA-8(9),SA-8(11),SA-12,SI-3,SR-1} | The chosen supply chain safeguards should demonstrably support a comprehensive, defense-in-breadth information security strategy. Safeguards should include protections for both hardware and software. Program should define their critical components (HW & SW) and identify the supply chain protections, approach/posture/process. |
| SPR-309 | The [organization] shall identify the key system components or capabilities that require isolation through physical or logical means.{SV-AC-6}{AC-3,SC-3,SC-7(13),SC-28(3),SC-32,SC-32(1)} | Fault management and security management capabilities would be classified as mission critical and likely need separated. Additionally, capabilities like TT&C, C&DH, GNC might need separated as well. |
| SPR-310 | The [organization] shall use a certified environment to develop, code and test executable software (firmware or bit-stream) that will be programmed into a one-time programmable FPGA or be programmed into non-volatile memory (NVRAM) that the FPGA executes.{SA-8(9),SA-8(11),SA-12,SA-12(1),SC-51,SI-7(10),SR-1,SR-5} | |
| SPR-311 | The [organization] shall ensure that all ASICs designed, developed, manufactured, packaged, and tested by suppliers with a Defense Microelectronics Activity (DMEA) Trust accreditation.{spacecraft-SP-5} {SV-SP-5}{SA-8(9),SA-8(11),SA-12,SA-12(1),SR-1,SR-5} | Trusted microelectronics reduce hardware supply chain risk. DMEA accreditation strengthens assurance. Hardware-level compromise prevention protects mission integrity. Secure fabrication underpins secure systems. |
| SPR-312 | If using the Government Microelectronics Assessment for Trust (GOMAT) framework outright, to perform ASIC and FPGA threat/vulnerability risk assessment, the following requirements would apply: {SV-SP-5}{SR-1,SR-5} | • 1.g “In coordination with the DOD CIO, the Director, Defense Intelligence Agency (DIA), and the Heads of the DOD Components, develop a strategy for managing risk in the supply chain for integrated circuit-related products and services (e.g., FPGAs, printed circuit boards) that are identifiable to the supplier as specifically created or modified for DOD (e.g., military temperature range, radiation hardened). |
| SPR-313 | The [organization] shall develop a plan for managing supply chain risks associated with the research and development, design, manufacturing, acquisition, delivery, integration, operations and maintenance, and disposal of organization-defined systems, system components, or system services.{SV-SP-4,SV-SP-5,SV-SP-6}{SR-2} | Structured SCRM planning identifies lifecycle risks. Comprehensive coverage ensures holistic oversight. Risk planning mitigates systemic exposure. Governance extends beyond deployment. |
| SPR-314 | The [organization] shall protect the supply chain risk management plan from unauthorized disclosure and modification.{SV-SP-4}{SR-2} | Disclosure of SCRM strategy may expose defensive weaknesses. Controlled access preserves operational advantage. Plan integrity prevents tampering. Governance artifacts must be secured. |
| SPR-315 | The [organization] shall review and update the supply chain risk management plan as required, to address threats, organizational, or environmental changes.{SV-SP-4}{SR-2} | Threat landscapes evolve rapidly. Periodic updates maintain relevance. Adaptive management strengthens resilience. Continuous improvement is essential. |
| SPR-316 | The [organization] shall establish a supply chain risk management team to lead and support supply chain risk management activities.{SV-SP-4}{SR-2(1)} | Dedicated oversight ensures coordinated supply chain defense. Defined roles improve accountability. Central leadership streamlines mitigation efforts. Organizational focus strengthens resilience. |
| SPR-317 | The [organization] shall employ [organization]-defined techniques to limit harm from potential adversaries identifying and targeting the Program supply chain.{SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11}{SR-3(2),SC-38} | Examples of security safeguards that the organization should consider implementing to limit the harm from potential adversaries targeting the organizational supply chain, are: (1) Using trusted physical delivery mechanisms that do not permit access to the element during delivery (ship via a protected carrier, use cleared/official couriers, or a diplomatic pouch); (2) Using trusted electronic delivery of products and services (require downloading from approved, verification-enhanced sites); (3) Avoiding the purchase of custom configurations, where feasible; (4) Using procurement carve outs (i.e., exclusions to commitments or obligations), where feasible; (5) Using defensive design approaches; (6) Employing system OPSEC principles; (7) Employing a diverse set of suppliers; (8) Employing approved vendor lists with standing reputations in industry; (9) Using a centralized intermediary and “Blind Buy” approaches to acquire element(s) to hide actual usage locations from an untrustworthy supplier or adversary Employing inventory management policies and processes; (10) Using flexible agreements during each acquisition and procurement phase so that it is possible to meet emerging needs or requirements to address supply chain risk without requiring complete revision or re-competition of an acquisition or procurement; (11) Using international, national, commercial or government standards to increase potential supply base; (12) Limiting the disclosure of information that can become publicly available; and (13) Minimizing the time between purchase decisions and required delivery. |
| SPR-318 | The [organization] shall ensure that the controls included in prime contracts are also included in the contracts of subcontractors.{SV-SP-4,SV-SP-6}{SR-3(3)} | Security gaps in subcontractors create systemic vulnerabilities. Flow-down requirements enforce consistent standards. Contractual alignment strengthens supply chain assurance. Uniform governance reduces weak links. |
| SPR-319 | The [organization] shall ensure adequate supplies of critical system components.{SV-AV-7}{SR-5(1)} | Examples include: using multiple suppliers throughout the supply chain for critical components, stockpiling spare components to ensure operation during mission-critical times, and the identification of functionally identical or similar components that may be used, if necessary. |
| SPR-320 | The [organization] shall develop and document program-specific configuration management policies and procedures for the hardware and software for the spacecraft. {SV-SP-9,SV-MA-6}{CM-1,CM-3,CM-5(6),SA-10,SA-10(3)} | Clear configuration governance prevents unauthorized modification. Policy-backed processes ensure consistency. Lifecycle control supports traceability. Managed change reduces mission risk. |
| SPR-328 | The [organization] shall ensure any update to on-board software, memory, or stored procedures has met high assurance standards before execution. {SV-SP-9,SV-SP-4}{AC-3(2),CM-3,SA-8(8),SA-8(31),SA-10(2),SR-4(4)} | On-orbit updates carry significant risk if not validated. High assurance standards prevent unauthorized or corrupted uploads from executing. Structured validation protects system integrity. Update governance reduces mission-ending configuration errors. |
| SPR-331 | The [organization] shall test software and firmware updates related to flaw remediation for effectiveness and potential side effects on mission systems in a separate test environment before installation.{SV-SP-1,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{CM-3,CM-3(1),CM-3(2),CM-4(1),CM-4(2),CM-10(1),SA-8(31),SA-11(9),SI-2,SI-3,SI-3(10),SI-7(10),SI-7(12),SR-5(2)} | This requirement is focused on software and firmware flaws. If hardware flaw remediation is required, refine the requirement to make this clear. |
| SPR-345 | The [organization] shall update the inventory of spacecraft components as an integral part of component installations, removals, and spacecraft updates.{SV-MA-4,SV-SP-4}{CM-8(1),CA-7,CM-2,CM-3} | Accurate inventory enables vulnerability tracking and incident response. Lifecycle updates prevent undocumented changes. Asset visibility strengthens security management. Configuration awareness reduces blind spots. |
| SPR-357 | The [organization] defines the security safeguards to be employed to protect the availability of system resources.{CP-2(2),SC-6,SI-13,SI-17} | |
| SPR-358 | The [organization] shall plan for the transfer of essential ground-segment functions to alternate processing/storage site(s) (e.g.secondary ground terminal) with minimal or no loss of operational continuity until the primary ground terminal is fully restored (if the architecture supports it).{SV-MA-5}{CP-2(6)} | Redundant ground infrastructure enhances availability. Preplanning reduces disruption during outage. Distributed architecture strengthens resilience. Continuity planning supports mission assurance. |
| SPR-359 | The [organization] shall plan for the transfer of essential space-segment functions to alternate processing platforms (e.g.proliferated/distributed constellations) with minimal or no loss of operational continuity until the primary node is fully restored (if the architecture supports it).{SV-MA-5}{CP-2(6)} | Proliferated or distributed space assets reduce single-node risk. Functional transfer ensures mission continuity. Planning anticipates hostile or environmental disruptions. Resilient architectures improve survivability. |
| SPR-393 | The [organization] shall confirm that the operational spacecrafts correspond to the baseline configuration. {SV-SP-9,SV-SP-4}{CM-2,CM-3,CM-3(7),CM-4(2),CM-6,SA-10} | Configuration drift undermines trust and auditability. Confirming alignment ensures deployed assets reflect approved design. Baseline validation supports recovery and compliance. Continuous verification reduces unknown risk. |
| SPR-401 | The [organization] shall correct reported cybersecurity-related information system flaws.{SV-SP-1,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{SI-2} | * Although this requirement is stated to specifically apply to cybersecurity-related flaws, the Program office may choose to broaden it to all SV flaws. * This requirement is allocated to the Program, as it is presumed, they have the greatest knowledge of the components of the system and when identified flaws apply. |
| SPR-402 | The [organization] shall identify, report, and coordinate correction of cybersecurity-related information system flaws.{SV-SP-1,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11}{SI-2} | Centralized reporting ensures timely remediation. Coordinated correction prevents repeated exposure. Documentation strengthens audit traceability. Rapid flaw management reduces exploitation window. |
| SPR-408 | The [organization] shall produce a plan for the continuous monitoring of security control effectiveness. The plan shall explicitly cover the space platform and link segment telemetry, automated anomaly detection, and SOC correlation of uplink, crosslink, and payload communications.{SV-DCO-1,SV-IT-1,SV-AV-1}{SA-4(8),CP-4(5),PM-31} | Comprehensive coverage ensures both onboard and communication segments are monitored. Telemetry-driven detection strengthens anomaly awareness. SOC correlation integrates space and ground visibility. Structured planning enhances detection capability. |
| SPR-435 | For FPGA pre-silicon artifacts that are developed, coded, and tested by a developer that is not accredited, the [organization] shall be subjected to a development environment and pre-silicon artifacts risk assessment by [organization]. Based on the results of the risk assessment, the [organization] may need to implement protective measures or other processes to ensure the integrity of the FPGA pre-silicon artifacts.{SV-SP-5}{SA-3,SA-3(1),SA-8(9),SA-8(11),SA-12,SA-12(1),SR-1,SR-5} | DOD-I-5200.44 requires the following: 4.c.2 “Control the quality, configuration, and security of software, firmware, hardware, and systems throughout their lifecycles... Employ protections that manage risk in the supply chain… (e.g., integrated circuits, field-programmable gate arrays (FPGA), printed circuit boards) when they are identifiable (to the supplier) as having a DOD end-use. “ 4.e “In applicable systems, integrated circuit-related products and services shall be procured from a Trusted supplier accredited by the Defense Microelectronics Activity (DMEA) when they are custom-designed, custommanufactured, or tailored for a specific DOD military end use (generally referred to as application-specific integrated circuits (ASIC)). “ 1.g “In coordination with the DOD CIO, the Director, Defense Intelligence Agency (DIA), and the Heads of the DOD Components, develop a strategy for managing risk in the supply chain for integrated circuit-related products and services (e.g., FPGAs, printed circuit boards) that are identifiable to the supplier as specifically created or modified for DOD (e.g., military temperature range, radiation hardened). |
| SPR-436 | The [organization] shall require the developer of the system, system component, or system services to demonstrate the use of a system development life cycle that includes [state-of-the-practice system/security engineering methods, software development methods, testing/evaluation/validation techniques, and quality control processes].{SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-9}{SA-3,SA-4(3)} | Examples of good security practices would be using defense-in-depth tactics across the board, least-privilege being implemented, two factor authentication everywhere possible, using DevSecOps, implementing and validating adherence to secure coding standards, performing static code analysis, component/origin analysis for open source, fuzzing/dynamic analysis with abuse cases, etc. |
| SPR-437 | The [organization] shall enable integrity verification of software and firmware components.{SV-IT-2}{CM-3(5),CM-5(6),CM-10(1),SA-8(9),SA-8(11),SA-8(21),SA-10(1),SI-3,SI-4(24),SI-7,SI-7(10),SI-7(12),SR-4(4)} | * The integrity verification mechanisms may include: ** Stipulating and monitoring logical delivery of products and services, requiring downloading from approved, verification-enhanced sites; ** Encrypting elements (software, software patches, etc.) and supply chain process data in transit (motion) and at rest throughout delivery; ** Requiring suppliers to provide their elements “secure by default”, so that additional configuration is required to make the element insecure; ** Implementing software designs using programming languages and tools that reduce the likelihood of weaknesses; ** Implementing cryptographic hash verification; and ** Establishing performance and sub-element baseline for the system and system elements to help detect unauthorized tampering/modification during repairs/refurbishing. ** Stipulating and monitoring logical delivery of products and services, requiring downloading from approved, verification-enhanced sites; ** Encrypting elements (software, software patches, etc.) and supply chain process data in transit (motion) and at rest throughout delivery; ** Requiring suppliers to provide their elements “secure by default”, so that additional configuration is required to make the element insecure; ** Implementing software designs using programming languages and tools that reduce the likelihood of weaknesses; ** Implementing cryptographic hash verification; and ** Establishing performance and sub-element baseline for the system and system elements to help detect unauthorized tampering/modification during repairs/refurbishing. |
| SPR-438 | Any EEEE or mechanical piece parts that cannot be procured from the OCM or their authorized distribution network shall be approved and the government program office notified to prevent and detect counterfeit and fraudulent parts and materials.{SV-SP-5}{SA-8(9),SA-8(11),SA-12,SA-12(1),SR-1,SR-5} | The Program, working with the contractors, shall identify which ASICs/FPGAs perform or execute an integral part of mission critical functions and if the supplier is accredited “Trusted” by DMEA. If the contractor is not accredited by DMEA, then the Program may apply various of the below ASIC/FPGA assurance requirements to the contractor, and the Program may need to perform a risk assessment of the contractor’s design environment. |
| SPR-439 | For ASICs that are designed, developed, manufactured, packaged, or tested by a supplier that is not DMEA accredited, the ASIC development shall undergo a threat/vulnerability risk assessment. Based on the results of the risk assessment, the [organization] may need to implement protective measures or other processes to ensure the integrity of the ASIC.{SV-SP-5}{SA-8(9),SA-8(11),SA-8(21),SA-12,SA-12(1),SR-1,SR-4(4),SR-5} | DOD-I-5200.44 requires the following: 4.c.2 “Control the quality, configuration, and security of software, firmware, hardware, and systems throughout their lifecycles... Employ protections that manage risk in the supply chain… (e.g., integrated circuits, field-programmable gate arrays (FPGA), printed circuit boards) when they are identifiable (to the supplier) as having a DOD end-use. “ 4.e “In applicable systems, integrated circuit-related products and services shall be procured from a Trusted supplier accredited by the Defense Microelectronics Activity (DMEA) when they are custom-designed, custommanufactured, or tailored for a specific DOD military end use (generally referred to as application-specific integrated circuits (ASIC)). “ 1.g “In coordination with the DOD CIO, the Director, Defense Intelligence Agency (DIA), and the Heads of the DOD Components, develop a strategy for managing risk in the supply chain for integrated circuit-related products and services (e.g., FPGAs, printed circuit boards) that are identifiable to the supplier as specifically created or modified for DOD (e.g., military temperature range, radiation hardened). |
| SPR-440 | Any EEEE or mechanical piece parts that cannot be procured from the OCM or their authorized franchised distribution network shall be approved by the [organization]’s Parts, Materials and Processes Control Board (PMPCB) as well as the government program office to prevent and detect counterfeit and fraudulent parts and materials.{SV-SP-5}{SR-1,SR-5} | The Program, working with the contractors, shall identify which ASICs/FPGAs perform or execute an integral part of mission critical functions and if the supplier is accredited “Trusted” by DMEA. If the contractor is not accredited by DMEA, then the Program may apply various of the below ASIC/FPGA assurance requirements to the contractor, and the Program may need to perform a risk assessment of the contractor’s design environment. |
| SPR-441 | For ASICs that are designed, developed, manufactured, packaged, or tested by a supplier that is NOT DMEA accredited Trusted, the ASIC development shall undergo a threat/vulnerability risk assessment.The assessment shall use Aerospace security guidance and requirements tailored from TOR-2019-00506 Vol.2, and TOR-2019-02543 ASIC and FPGA Risk Assessment Process and Checklist.Based on the results of the risk assessment, the Program may require the developer to implement protective measures or other processes to ensure the integrity of the ASIC.{SV-SP-5}{SR-1,SR-5} | DOD-I-5200.44 requires the following: 4.c.2 “Control the quality, configuration, and security of software, firmware, hardware, and systems throughout their lifecycles... Employ protections that manage risk in the supply chain… (e.g., integrated circuits, field-programmable gate arrays (FPGA), printed circuit boards) when they are identifiable (to the supplier) as having a DOD end-use. “ 4.e “In applicable systems, integrated circuit-related products and services shall be procured from a Trusted supplier accredited by the Defense Microelectronics Activity (DMEA) when they are custom-designed, custommanufactured, or tailored for a specific DOD military end use (generally referred to as application-specific integrated circuits (ASIC)). “ 1.g “In coordination with the DOD CIO, the Director, Defense Intelligence Agency (DIA), and the Heads of the DOD Components, develop a strategy for managing risk in the supply chain for integrated circuit-related products and services (e.g., FPGAs, printed circuit boards) that are identifiable to the supplier as specifically created or modified for DOD (e.g., military temperature range, radiation hardened). |
| SPR-442 | For FPGA pre-silicon artifacts that are developed, coded, and tested by a developer that is NOT DMEA accredited Trusted, the contractor/developer shall be subjected to a development environment and pre-silicon artifacts risk assessment by the Program.The assessment shall use Aerospace security guidance and requirements in TOR-2019-00506 Vol.2, and TOR-2019-02543 ASIC and FPGA Risk Assessment Process and Checklist.Based on the results of the risk assessment, the Program may require the developer to implement protective measures or other processes to ensure the integrity of the FPGA pre-silicon artifacts.{SV-SP-5}{SR-1,SR-5} | DOD-I-5200.44 requires the following: 4.c.2 “Control the quality, configuration, and security of software, firmware, hardware, and systems throughout their lifecycles... Employ protections that manage risk in the supply chain… (e.g., integrated circuits, field-programmable gate arrays (FPGA), printed circuit boards) when they are identifiable (to the supplier) as having a DOD end-use. “ 4.e “In applicable systems, integrated circuit-related products and services shall be procured from a Trusted supplier accredited by the Defense Microelectronics Activity (DMEA) when they are custom-designed, custommanufactured, or tailored for a specific DOD military end use (generally referred to as application-specific integrated circuits (ASIC)). “ 1.g “In coordination with the DOD CIO, the Director, Defense Intelligence Agency (DIA), and the Heads of the DOD Components, develop a strategy for managing risk in the supply chain for integrated circuit-related products and services (e.g., FPGAs, printed circuit boards) that are identifiable to the supplier as specifically created or modified for DOD (e.g., military temperature range, radiation hardened). |
| SPR-443 | The [organization] shall ensure that the contractors/developers have all ASICs designed, developed, manufactured, packaged, and tested by suppliers with a Defense Microelectronics Activity (DMEA) Trust accreditation.{SV-SP-5}{SR-1,SR-5} | |
| SPR-444 | The [organization] shall ensure that the contractors/developers have all EEEE, and mechanical piece parts procured from the Original Component Manufacturer (OCM) or their authorized franchised distribution network.{SV-SP-5}{SR-1,SR-5} | These requirements might only make sense for ASIC/FPGA that are deemed to support mission critical functions. The Program has the responsibility to identify all ASICs and FPGAs that are used in all flight hardware by each hardware element. This list must include all contractor and subcontractor usage of ASICs and FPGAs. |
| SPR-445 | The [organization] shall use a DMEA certified environment to develop, code and test executable software (firmware or bit-stream) that will be programmed into a one-time programmable FPGA or be programmed into non-volatile memory (NVRAM) that the FPGA executes.{SV-SP-5}{SR-1,SR-5} | DOD-I-5200.44 requires the following: 4.c.2 “Control the quality, configuration, and security of software, firmware, hardware, and systems throughout their lifecycles... Employ protections that manage risk in the supply chain… (e.g., integrated circuits, field-programmable gate arrays (FPGA), printed circuit boards) when they are identifiable (to the supplier) as having a DOD end-use. “ 4.e “In applicable systems, integrated circuit-related products and services shall be procured from a Trusted supplier accredited by the Defense Microelectronics Activity (DMEA) when they are custom-designed, custommanufactured, or tailored for a specific DOD military end use (generally referred to as application-specific integrated circuits (ASIC)). “ 1.g “In coordination with the DOD CIO, the Director, Defense Intelligence Agency (DIA), and the Heads of the DOD Components, develop a strategy for managing risk in the supply chain for integrated circuit-related products and services (e.g., FPGAs, printed circuit boards) that are identifiable to the supplier as specifically created or modified for DOD (e.g., military temperature range, radiation hardened). |
| SPR-461 | The [spacecraft] shall fail over mission critical processing to a redundant onboard compute element while maintaining authentication, authorization, and cryptographic protections.{SV-MA-5}{CP-2(6),CP-10} | Redundant compute without preserved security controls introduces new risk. Failover must maintain authentication and cryptographic state. Secure redundancy prevents availability from undermining integrity. Resilience must not weaken protection. |
| SPR-462 | The [spacecraft] shall support delegation of temporary data storage to [organization]-authorized alternate nodes or spacecraft and shall preserve confidentiality, integrity, and access controls for the delegated data.{SV-CF-1,SV-CF-2,SV-AC-1}{CP-2(6),SC-28,AC-3} | Delegated storage or processing expands trust boundaries. Maintaining CIA protections during delegation prevents exposure. Secure federation supports constellation-based architectures. Controlled delegation strengthens distributed resilience. |
| SPR-463 | The [spacecraft] shall maintain configuration and cryptographic synchronization required to activate alternate processing or storage and shall verify the alternate before activation.{SV-SP-9,SV-AC-3}{CP-2(6),CM-2} | Activation of alternate nodes requires synchronized keys and configurations. Unsynchronized failover risks data corruption or exposure. Verification before activation prevents propagation of compromised states. Coordinated readiness supports secure recovery. |
| SPR-471 | The [spacecraft] shall preserve trusted boot and cryptographic key storage functionality under EMP conditions by locating those functions within hardened, power-conditioned domains.{SV-IT-3,SV-AC-3}{PE-21} | Electromagnetic disruption is a realistic space threat. Hardening trusted boot and key storage ensures continuity of secure startup. Protection of root-of-trust preserves system integrity. Resilient design supports adversarial environments. |
| SPR-472 | The [organization] shall define mission and business processes that map mission objectives to space-segment security requirements, including safe-mode criteria, secure uplink and downlink obligations, and recovery procedures, and shall baseline these processes under configuration control.{SV-MA-6,SV-AV-5}{PM-11,PL-2,CM-2} | Security must align with mission objectives. Explicit mapping ensures safe-mode criteria and communication obligations are controlled. Baseline governance prevents undocumented deviations. Integration supports mission assurance. |
| SPR-473 | The [organization] shall establish a threat awareness program that provides mission-relevant cyber and EW threat briefings and advisories to spacecraft engineering, integration, and operations personnel at an [organization]-defined frequency, and shall track completion.{SV-MA-6}{PM-16} | Continuous threat awareness informs engineering decisions. Structured briefings reduce blind spots. Tracking completion ensures accountability. Knowledge improves preparedness. |
| SPR-474 | The [organization] shall incorporate space cyber threat scenarios and mitigations into mission rehearsals and anomaly response training.{SV-MA-5,SV-AV-5}{PM-16,IR-2} | Realistic exercises validate preparedness. Embedding cyber threats in rehearsals strengthens operational readiness. Scenario-based training reduces reaction latency. Prepared teams enhance resilience. |
| SPR-475 | The [organization] shall implement automated mechanisms to ingest, validate, and distribute space-relevant threat intelligence to [organization]-defined recipients, and to format uplinkable indicators or signatures for onboard detection capabilities where applicable.{SV-DCO-1,SV-IT-1}{SI-5,PM-16(1)} | Timely ingestion and distribution of space-relevant intelligence reduces exposure. Formatting indicators for onboard use supports proactive detection. Automation accelerates defensive posture. Integration supports adaptive security. |
| SPR-476 | The [organization] shall identify suppliers of mission-critical or mission-essential items and apply enhanced oversight that includes security practice vetting, contract language mandating secure manufacturing, and periodic compliance audits.{SV-SP-4,SV-SP-5}{PM-30(1),SR-6,SR-3} | Mission-critical suppliers require elevated scrutiny. Contractual language enforces security standards. Periodic audits reduce supply chain risk. Oversight strengthens systemic assurance. |
| SPR-477 | The [organization] shall require independent testing and inspection of mission-critical components prior to integration to verify hardware integrity and cryptographic module assurance.{SV-SP-5,SV-AC-3}{PM-30(1),SR-11} | Third-party validation reduces conflict-of-interest risk. Independent inspection verifies hardware integrity and cryptographic assurance. External attestation strengthens confidence. Verification supports mission-critical trust. |
| SPR-478 | The [organization] shall map supplier failure impact to mission functions and assign risk-based oversight and acceptance criteria.{SV-SP-4,SV-MA-6}{PM-30(1),SR-2,RA-3} | Understanding supplier failure impact informs oversight priority. Risk-based criteria ensure proportional governance. Structured assessment prevents blind spots. Supply chain risk alignment strengthens mission resilience. |
| SPR-479 | The [organization] shall define, baseline, and maintain the purposing of the space platform and link segment, including intended objectives, authorized capabilities, prohibited functions, and operational constraints, and shall use this baseline to bound requirements, updates, and on-orbit operations.{SV-AC-8,SV-MA-6}{PM-32,PL-8} | Defining authorized and prohibited functions prevents scope creep. Clear purposing bounds updates and operational use. Governance limits misuse potential. Structured baseline supports disciplined operations. |
| SPR-489 | The [spacecraft] shall host privileged functions, including flight control and cryptographic key management, in physically separate processing domains that have no direct data bus connectivity to non privileged domains. {SV-AC-6,SV-AC-3}{SC-3,SC-32(1),SC-39} | Hardware-level separation prevents software bypass. Isolation protects flight control and key management. Physical boundaries strengthen trust. Segmentation enforces zero-trust architecture. |
| SPR-490 | The [spacecraft] shall ensure cross domain exchanges occur only through [organization] defined, verified guards that enforce format, rate, and content checks.{SV-AC-6,SV-IT-2}{AC-4,SC-7,SC-32(1)} | Verified guards ensure controlled data exchange. Format and rate checks prevent covert channel exploitation. Enforced mediation supports mandatory control. Guarded exchange strengthens isolation. |
| SPR-493 | The [spacecraft] shall ensure that security-critical functions, including cryptographic processing, key storage, secure boot, and audit logging, continue under single-component failure by providing redundancy, graceful degradation, or verified fallback modes.{SV-MA-5}{SI-13,SC-24} | Single-point failure in security undermines mission assurance. Redundancy ensures continued enforcement. Graceful degradation maintains CIA protections. Fault tolerance supports resilience. |
| SPR-494 | The [spacecraft] shall preserve and protect a golden backup of security credentials and integrity anchors and shall restore them automatically when corruption is detected.{SV-AC-3,SV-IT-3}{SI-13,CP-9} | Protected backups enable secure recovery from corruption. Automatic restoration reduces downtime. Integrity anchors preserve trust. Backup governance strengthens resilience. |
| SPR-495 | The [spacecraft] shall detect impending failure of security components and initiate controlled failover to preserve confidentiality, integrity, and availability.{SV-MA-5,SV-DCO-1}{SI-4,SI-13,CP-10} | Early detection prevents cascading compromise. Controlled switchover maintains CIA properties. Structured alerting enhances situational awareness. Fault handling preserves assurance. |
| SPR-509 | The [organization] shall procure flight items only from an AO-approved vetted supplier whitelist; off-list buys require documented risk acceptance and compensating pedigree/scanning.{SV-SP-4}{SR-4(4),SR-3,SR-5} | Restricting procurement to vetted suppliers reduces counterfeit and tampering risk. Off-list acquisitions require formal risk acceptance, preserving governance. Structured sourcing strengthens trust anchors. Controlled procurement reduces systemic exposure. |
| SPR-526 | The [organization] shall tie go/no‑go authorizations to verified artifacts (flatsat/twin results, signed images, key ceremonies) and define how authorization boundaries adjust under contingency conditions; evidence shall be captured for A&A.{SV-MA-6,SV-SP-9}{CA-1,PL-2,CM-3} | Flight decisions must rely on validated artifacts. Evidence capture strengthens compliance. Contingency adjustments must remain controlled. Governance alignment supports mission safety. |
| SPR-528 | The [organization] shall package each flight change (software, bitstreams, configuration tables) with a signed manifest, precondition checks (mode, power/thermal, link), explicit hold/commit points, and resumable procedures across AOS/LOS; the [spacecraft] shall enforce manifest checks prior to activation.{SV-SP-9,SV-IT-2}{CM-3,CM-3(2),SI-7,SA-10} | Manifest enforcement ensures integrity prior to activation. Precondition checks prevent unsafe changes. Resumable logic supports space contact constraints. Structured packaging strengthens update security. |
| SPR-529 | The [organization] shall define freeze windows around launch/maneuvers/high‑risk events, specify exception criteria and approvers, and require chunking, rate limits, checksum/signature gates, and telemetry cues that confirm final state when changes occur within a freeze.{SV-MA-6,SV-SP-9}{CM-3,CM-3(5),CM-5} | Operational stability requires disciplined change control. Freeze periods reduce compounding risk. Defined exceptions preserve agility. Structured boundaries protect mission safety. |
| SPR-530 | The [spacecraft] shall enable selected maintenance capabilities only within time‑bounded and mode‑bounded windows, audit enable/disable events, auto‑revert on timeout/reset, and expose enabled/disabled capability state in telemetry.{SV-AC-8,SV-AC-4}{CM-7,CM-7(2),SA-8,SA-8(14),AC-3} | Maintenance capabilities expand risk surface. Time-limited activation reduces abuse window. Telemetry exposure ensures oversight. Auto-revert strengthens containment. |
| SPR-537 | The [organization] shall define event‑driven triggers for rapid risk reassessment (e.g., new images/bitstreams, key rotations, partner‑station onboarding, notable anomalies, vendor advisories) and rehearse fast‑turn evaluations in a twin/flatsat to drive decisions within one or two passes.{SV-SP-6,SV-SP-9}{RA-3,RA-3(1),CA-7} | Triggers ensure timely re-evaluation after impactful events. Flatsat rehearsal validates mitigation feasibility. Rapid cycles align with limited contact windows. Structured agility strengthens mission defense. |
| SPR-538 | The [spacecraft] shall budget CPU/power/memory for security functions (crypto, logging, verification), implement graceful degradation (e.g., summarize logs, throttle verification) that preserves TT&C and safing, and expose telemetry showing throttling decisions and residual capacity.{SV-AV-1,SV-DCO-1}{PE-9,SA-8(8),SC-6,CP-2} | Security must not starve essential TT&C. Explicit resource budgeting ensures sustained enforcement. Graceful degradation preserves mission priority. Telemetry visibility supports oversight. |
| SPR-540 | The [spacecraft] shall employ deterministic scheduling where feasible and bound retries/timeouts on command/telemetry paths by mode, exposing retry counters, backoff state, and finite‑state transitions in telemetry with consistent error/reject reason codes.{SV-IT-4,SV-AV-1}{SA-8(12),SI-10(3),SI-13} | Determinism prevents runaway retries or timing exploitation. Exposed counters support diagnosis. Finite-state transitions strengthen transparency. Predictable behavior improves assurance. |