1. Home
  2. D3FEND Techniques
  3. D3-SYSM
  4. D3-SVCDM

Service Dependency Mapping

Service dependency mapping determines the services on which each given service relies.

ID: D3-SVCDM
Subclasses: 
Artifacts: 
ⓘ
Tactic:

Informational References

https://d3fend.mitre.org/technique/d3f:ServiceDependencyMapping/

Countermeasures

ID Name Description NIST Rev5 D3FEND ISO 27001
CM0020 Threat modeling Use threat modeling, attack surface analysis, and vulnerability analysis to inform the current development process using analysis from similar systems, components, or services where applicable. Reduce attack surface where possible based on threats. CA-3 CM-4 CP-2 PL-8 PL-8(1) RA-3 SA-11 SA-11(2) SA-11(3) SA-11(6) SA-15(6) SA-15(8) SA-2 SA-3 SA-4(9) SA-8 SA-8(25) SA-8(30) D3-AI D3-AVE D3-SWI D3-HCI D3-NM D3-LLM D3-ALLM D3-PLLM D3-PLM D3-APLM D3-PPLM D3-SYSM D3-DEM D3-SVCDM D3-SYSDM A.5.14 A.8.21 A.8.9 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.5.8 6.1.2 8.2 9.3.2 A.8.8 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.8.29 A.8.30
CM0022 Criticality Analysis Conduct a criticality analysis to identify mission critical functions, critical components, and data flows and reduce the vulnerability of such functions and components through secure system design. Focus supply chain protection on the most critical components/functions. Leverage other countermeasures like segmentation and least privilege to protect the critical components. CM-4 CP-2 CP-2(8) PL-7 PL-8 PL-8(1) PM-11 PM-17 PM-30 PM-30(1) PM-32 RA-3 RA-3(1) RA-9 RA-9 SA-11 SA-11(3) SA-15(3) SA-2 SA-3 SA-4(5) SA-4(9) SA-8 SA-8(25) SA-8(3) SA-8(30) SC-32(1) SC-7(29) SR-1 SR-1 SR-2 SR-2(1) SR-3 SR-3(2) SR-3(3) SR-5(1) SR-7 D3-AVE D3-OSM D3-IDA D3-SJA D3-AI D3-DI D3-SWI D3-NNI D3-HCI D3-NM D3-PLM D3-AM D3-SYSM D3-SVCDM D3-SYSDM D3-SYSVA D3-OAM D3-ORA A.8.9 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.5.30 8.1 A.5.8 A.5.8 4.4 6.2 7.5.1 7.5.2 7.5.3 10.2 6.1.2 8.2 9.3.2 A.8.8 A.5.22 A.5.2 A.5.8 A.8.25 A.8.31 A.8.27 A.8.28 A.8.29 A.8.30 5.2 5.3 7.5.1 7.5.2 7.5.3 A.5.1 A.5.2 A.5.4 A.5.19 A.5.31 A.5.36 A.5.37 A.5.19 A.5.20 A.5.21 A.8.30 A.5.20 A.5.21 A.5.22
CM0074 Distributed Constellations A distributed system uses a number of nodes, working together, to perform the same mission or functions as a single node. In a distributed constellation, the end user is not dependent on any single satellite but rather uses multiple satellites to derive a capability. A distributed constellation can complicate an adversary’s counterspace planning by presenting a larger number of targets that must be successfully attacked to achieve the same effects as targeting just one or two satellites in a less-distributed architecture. GPS is an example of a distributed constellation because the functioning of the system is not dependent on any single satellite or ground station; a user can use any four satellites within view to get a time and position fix.* *https://csis-website-prod.s3.amazonaws.com/s3fs-public/publication/210225_Harrison_Defense_Space.pdf?N2KWelzCz3hE3AaUUptSGMprDtBlBSQG CP-10(6) CP-11 CP-13 CP-2 CP-2(2) CP-2(3) CP-2(5) CP-2(6) PE-21 D3-AI D3-NNI D3-SYSM D3-DEM D3-SVCDM D3-SYSVA 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.8.6 A.5.29 A.5.29
CM0075 Proliferated Constellations Proliferated satellite constellations deploy a larger number of the same types of satellites to similar orbits to perform the same missions. While distribution relies on placing more satellites or payloads on orbit that work together to provide a complete capability, proliferation is simply building more systems (or maintaining more on-orbit spares) to increase the constellation size and overall capacity. Proliferation can be an expensive option if the systems being proliferated are individually expensive, although highly proliferated systems may reduce unit costs in production from the learning curve effect and economies of scale.* *https://csis-website-prod.s3.amazonaws.com/s3fs-public/publication/210225_Harrison_Defense_Space.pdf?N2KWelzCz3hE3AaUUptSGMprDtBlBSQG CP-10(6) CP-11 CP-13 CP-2 CP-2(2) CP-2(3) CP-2(5) CP-2(6) PE-21 D3-AI D3-NNI D3-SYSM D3-DEM D3-SVCDM D3-SYSVA 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.8.6 A.5.29 A.5.29
CM0076 Diversified Architectures In a diversified architecture, multiple systems contribute to the same mission using platforms and payloads that may be operating in different orbits or in different domains. For example, wideband communications to fixed and mobile users can be provided by the military’s WGS system, commercial SATCOM systems, airborne communication nodes, or terrestrial networks. The Chinese BeiDou system for positioning, navigation, and timing uses a diverse set of orbits, with satellites in geostationary orbit (GEO), highly inclined GEO, and medium Earth orbit (MEO). Diversification reduces the incentive for an adversary to attack any one of these systems because the impact on the overall mission will be muted since systems in other orbits or domains can be used to compensate for losses. Moreover, attacking space systems in diversified orbits may require different capabilities for each orbital regime, and the collateral damage from such attacks, such as orbital debris, could have a much broader impact politically and economically.* *https://csis-website-prod.s3.amazonaws.com/s3fs-public/publication/210225_Harrison_Defense_Space.pdf?N2KWelzCz3hE3AaUUptSGMprDtBlBSQG CP-11 CP-13 CP-2 CP-2(2) CP-2(3) CP-2(5) CP-2(6) D3-AI D3-NNI D3-SYSM D3-DEM D3-SVCDM D3-SYSVA 7.5.1 7.5.2 7.5.3 A.5.2 A.5.29 A.8.1 A.8.6 A.5.29 A.5.29
CM0078 Space-Based Radio Frequency Mapping Space-based RF mapping is the ability to monitor and analyze the RF environment that affects space systems both in space and on Earth. Similar to exquisite SDA, space-based RF mapping provides space operators with a more complete picture of the space environment, the ability to quickly distinguish between intentional and unintentional interference, and the ability to detect and geolocate electronic attacks. RF mapping can allow operators to better characterize jamming and spoofing attacks from Earth or from other satellites so that other defenses can be more effectively employed.* *https://csis-website-prod.s3.amazonaws.com/s3fs-public/publication/210225_Harrison_Defense_Space.pdf?N2KWelzCz3hE3AaUUptSGMprDtBlBSQG PE-20 RA-6 SI-4(14) D3-APLM D3-DEM D3-SVCDM D3-SYSM A.5.10
CM0066 Model-based System Verification Real-time physics model-based system verification of state could help to verify data input and control sequence changes SI-4 SI-4(2) D3-OAM D3-AM D3-DEM D3-SVCDM D3-SYSDM A.8.16

Related SPARTA Techniques and Sub-Techniques

ID Name Description
IA-0001 Compromise Supply Chain Threat actors may manipulate or compromise products or product delivery mechanisms before the customer receives them in order to achieve data or system compromise.
IA-0001.02 Software Supply Chain Threat actors may manipulate software binaries and applications prior to the customer receiving them in order to achieve data or system compromise. This attack can take place in a number of ways, including manipulation of source code, manipulation of the update and/or distribution mechanism, or replacing compiled versions with a malicious one.
IA-0001.03 Hardware Supply Chain Threat actors may manipulate hardware components in the victim spacecraft prior to the customer receiving them in order to achieve data or system compromise. The threat actor can insert backdoors and give them a high level of control over the system when they modify the hardware or firmware in the supply chain. This would include ASIC and FPGA devices as well. A spacecraft component can also be damaged if a specific HW component, built to fail after a specific period, or counterfeit with a low reliability, breaks out.
IA-0004 Secondary/Backup Communication Channel Threat actors may compromise alternative communication pathways which may not be as protected as the primary pathway. Depending on implementation the contingency communication pathways/solutions may lack the same level of security (i.e., physical security, encryption, authentication, etc.) which if forced to use could provide a threat actor an opportunity to launch attacks. Typically these would have to be coupled with other denial of service techniques on the primary pathway to force usage of secondary pathways.
IA-0004.01 Ground Station Threat actors may establish a foothold within the backup ground/mission operations center (MOC) and then perform attacks to force primary communication traffic through the backup communication channel so that other TTPs can be executed (man-in-the-middle, malicious commanding, malicious code, etc.). While an attacker would not be required to force the communications through the backup channel vice waiting until the backup is used for various reasons. Threat actors can also utilize compromised ground stations to chain command execution and payload delivery across geo-separated ground stations to extend reach and maintain access on spacecraft. The backup ground/MOC should be considered a viable attack vector and the appropriate/equivalent security controls from the primary communication channel should be on the backup ground/MOC as well.
IA-0006 Compromise Hosted Payload Threat actors may compromise the target spacecraft hosted payload to initially access and/or persist within the system. Hosted payloads can usually be accessed from the ground via a specific command set. The command pathways can leverage the same ground infrastructure or some host payloads have their own ground infrastructure which can provide an access vector as well. Threat actors may be able to leverage the ability to command hosted payloads to upload files or modify memory addresses in order to compromise the system. Depending on the implementation, hosted payloads may provide some sort of lateral movement potential.
IA-0008 Rogue External Entity Threat actors may gain access to a victim spacecraft through the use of a rogue external entity. With this technique, the threat actor does not need access to a legitimate ground station or communication site.
IA-0008.03 ASAT/Counterspace Weapon Threat actors may utilize counterspace platforms to access/impact spacecraft. These counterspace capabilities vary significantly in the types of effects they create, the level of technological sophistication required, and the level of resources needed to develop and deploy them. These diverse capabilities also differ in how they are employed and how easy they are to detect and attribute and the permanence of the effects they have on their target.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101
IA-0009 Trusted Relationship Access through trusted third-party relationship exploits an existing connection that has been approved for interconnection. Leveraging third party / approved interconnections to pivot into the target systems is a common technique for threat actors as these interconnections typically lack stringent access control due to the trusted status.
IA-0009.01 Mission Collaborator (academia, international, etc.) Threat actors may seek to exploit mission partners to gain an initial foothold for pivoting into the mission environment and eventually impacting the spacecraft. The complex nature of many space systems rely on contributions across organizations, including academic partners and even international collaborators. These organizations will undoubtedly vary in their system security posture and attack surface.
IA-0009.02 Vendor Threat actors may target the trust between vendors and the target space vehicle. Missions often grant elevated access to vendors in order to allow them to manage internal systems as well as cloud-based environments. The vendor's access may be intended to be limited to the infrastructure being maintained but it may provide laterally movement into the target space vehicle. Attackers may leverage security weaknesses in the vendor environment to gain access to more critical mission resources or network locations. In the space vehicle context vendors may have direct commanding and updating capabilities outside of the primary communication channel.
IA-0009.03 User Segment Threat actors can target the user segment in an effort to laterally move into other areas of the end-to-end mission architecture. When user segments are interconnected, threat actors can exploit lack of segmentation as the user segment's security undoubtedly varies in their system security posture and attack surface than the primary space mission. The user equipment and users themselves provide ample attack surface as the human element and their vulnerabilities (i.e., social engineering, phishing, iOT) are often the weakest security link and entry point into many systems.
IA-0010 Exploit Reduced Protections During Safe-Mode Threat actors may take advantage of the victim spacecraft being in safe mode and send malicious commands that may not otherwise be processed. Safe-mode is when all non-essential systems are shut down and only essential functions within the spacecraft are active. During this mode, several commands are available to be processed that are not normally processed. Further, many protections may be disabled at this time.
EX-0005 Exploit Hardware/Firmware Corruption Threat actors can target the underlying hardware and/or firmware using various TTPs that will be dependent on the specific hardware/firmware. Typically, software tools (e.g., antivirus, antimalware, intrusion detection) can protect a system from threat actors attempting to take advantage of those vulnerabilities to inject malicious code. However, there exist security gaps that cannot be closed by the above-mentioned software tools since they are not stationed on software applications, drivers or the operating system but rather on the hardware itself. Hardware components, like memory modules and caches, can be exploited under specific circumstances thus enabling backdoor access to potential threat actors. In addition to hardware, the firmware itself which often is thought to be software in its own right also provides an attack surface for threat actors. Firmware is programming that's written to a hardware device's non-volatile memory where the content is saved when a hardware device is turned off or loses its external power source. Firmware is written directly onto a piece of hardware during manufacturing and it is used to run on the device and can be thought of as the software that enables hardware to run. In the space vehicle context, firmware and field programmable gate array (FPGA)/application-specific integrated circuit (ASIC) logic/code is considered equivalent to firmware.
EX-0005.01 Design Flaws Threat actors may target design features/flaws with the hardware design to their advantage to cause the desired impact. Threat actors may utilize the inherent design of the hardware (e.g. hardware timers, hardware interrupts, memory cells), which is intended to provide reliability, to their advantage to degrade other aspects like availability. Additionally, field programmable gate array (FPGA)/application-specific integrated circuit (ASIC) logic can be exploited just like software code can be exploited. There could be logic/design flaws embedded in the hardware (i.e., FPGA/ASIC) which may be exploitable by a threat actor.
EX-0009 Exploit Code Flaws Threats actors may identify and exploit flaws or weaknesses within the software running on-board the target spacecraft. These attacks may be extremely targeted and tailored to specific coding errors introduced as a result of poor coding practices or they may target known issues in the commercial software components.
EX-0009.01 Flight Software Threat actors may abuse known or unknown flight software code flaws in order to further the attack campaign. Some FSW suites contain API functionality for operator interaction. Threat actors may seek to exploit these or abuse a vulnerability/misconfiguration to maliciously execute code or commands. In some cases, these code flaws can perpetuate throughout the victim spacecraft, allowing access to otherwise segmented subsystems.
EX-0009.02 Operating System Threat actors may exploit flaws in the operating system code, which controls the storage, memory management, provides resources to the FSW, and controls the bus. There has been a trend where some modern spacecraft are running Unix-based operating systems and establishing SSH connections for communications between the ground and spacecraft. Threat actors may seek to gain access to command line interfaces & shell environments in these instances. Additionally, most operating systems, including real-time operating systems, include API functionality for operator interaction. Threat actors may seek to exploit these or abuse a vulnerability/misconfiguration to maliciously execute code or commands.
EX-0010 Malicious Code Threat actors may rely on other tactics and techniques in order to execute malicious code on the victim spacecraft. This can be done via compromising the supply chain or development environment in some capacity or taking advantage of known commands. However, once malicious code has been uploaded to the victim spacecraft, the threat actor can then trigger the code to run via a specific command or wait for a legitimate user to trigger it accidently. The code itself can do a number of different things to the hosted payload, subsystems, or underlying OS.
EX-0010.01 Ransomware Threat actors may encrypt spacecraft data to interrupt availability and usability. Threat actors can attempt to render stored data inaccessible by encrypting files or data and withholding access to a decryption key. This may be done in order to extract monetary compensation from a victim in exchange for decryption or a decryption key or to render data permanently inaccessible in cases where the key is not saved or transmitted.
EX-0010.02 Wiper Malware Threat actors may deploy wiper malware, which is a type of malicious software designed to destroy data or render it unusable. Wiper malware can spread through various means, software vulnerabilities (CWE/CVE), or by exploiting weak or stolen credentials.
EX-0010.03 Rootkit Rootkits are programs that hide the existence of malware by intercepting/hooking and modifying operating system API calls that supply system information. Rootkits or rootkit enabling functionality may reside at the flight software or kernel level in the operating system or lower, to include a hypervisor, Master Boot Record, or System Firmware.
EX-0010.04 Bootkit Adversaries may use bootkits to persist on systems and evade detection. Bootkits reside at a layer below the operating system and may make it difficult to perform full remediation unless an organization suspects one was used and can act accordingly.
EX-0011 Exploit Reduced Protections During Safe-Mode Threat actors may take advantage of the victim spacecraft being in safe mode and send malicious commands that may not otherwise be processed. Safe-mode is when all non-essential systems are shut down and only essential functions within the spacecraft are active. During this mode, several commands are available to be processed that are not normally processed. Further, many protections may be disabled at this time.
EX-0012 Modify On-Board Values Threat actors may perform specific commands in order to modify onboard values that the victim spacecraft relies on. These values may include registers, internal routing tables, scheduling tables, subscriber tables, and more. Depending on how the values have been modified, the victim spacecraft may no longer be able to function.
EX-0012.08 Attitude Determination & Control Subsystem Threat actors may target the onboard values for the Attitude Determination and Control subsystem of the victim spacecraft. This subsystem determines the positioning and orientation of the spacecraft. Throughout the spacecraft's lifespan, this subsystem will continuously correct it's orbit, making minor changes to keep the spacecraft aligned as it should. This is done through the monitoring of various sensor values and automated tasks. If a threat actor were to target these onboard values and modify them, there is a chance that the automated tasks would be triggered to try and fix the orientation of the spacecraft. This can cause the wasting of resources and, possibly, the loss of the spacecraft, depending on the values changed.
EX-0016 Jamming Threat actors may attempt to jam Global Navigation Satellite Systems (GNSS) signals (i.e. GPS, Galileo, etc.) to inhibit a spacecraft's position, navigation, and/or timing functions.
EX-0016.01 Uplink Jamming An uplink jammer is used to interfere with signals going up to a satellite by creating enough noise that the satellite cannot distinguish between the real signal and the noise. Uplink jamming of the control link, for example, can prevent satellite operators from sending commands to a satellite. However, because the uplink jammer must be within the field of view of the antenna on the satellite receiving the command link, the jammer must be physically located within the vicinity of the command station on the ground.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101
EX-0016.02 Downlink Jamming Downlink jammers target the users of a satellite by creating noise in the same frequency as the downlink signal from the satellite. A downlink jammer only needs to be as powerful as the signal being received on the ground and must be within the field of view of the receiving terminal’s antenna. This limits the number of users that can be affected by a single jammer. Since many ground terminals use directional antennas pointed at the sky, a downlink jammer typically needs to be located above the terminal it is attempting to jam. This limitation can be overcome by employing a downlink jammer on an air or space-based platform, which positions the jammer between the terminal and the satellite. This also allows the jammer to cover a wider area and potentially affect more users. Ground terminals with omnidirectional antennas, such as many GPS receivers, have a wider field of view and thus are more susceptible to downlink jamming from different angles on the ground.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101
EX-0014 Spoofing Threat actors may attempt to spoof the various sensor and controller data that is depended upon by various subsystems within the victim spacecraft. Subsystems rely on this data to perform automated tasks, process gather data, and return important information to the ground controllers. By spoofing this information, threat actors could trigger automated tasks to fire when they are not needed to, potentially causing the spacecraft to behave erratically. Further, the data could be processed erroneously, causing ground controllers to receive incorrect telemetry or scientific data, threatening the spacecraft's reliability and integrity.
EX-0014.03 Sensor Data Threat actors may target sensor data on the space vehicle to achieve their attack objectives. Sensor data is typically inherently trusted by the space vehicle therefore an attractive target for a threat actor. Spoofing the sensor data could affect the calculations and disrupt portions of a control loop as well as create uncertainty within the mission thereby creating temporary denial of service conditions for the mission. Affecting the integrity of the sensor data can have varying impacts on the space vehicle depending on decisions being made by the space vehicle using the sensor data. For example, spoofing data related to attitude control could adversely impact the space vehicles ability to maintain orbit.
EX-0017 Kinetic Physical Attack Kinetic physical attacks attempt to damage or destroy space- or land-based space assets. They typically are organized into three categories: direct-ascent, co-orbital, and ground station attacks [beyond the focus of SPARTA at this time]. The nature of these attacks makes them easier to attribute and allow for better confirmation of success on the part of the attacker.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101
EX-0017.01 Direct Ascent ASAT A direct-ascent ASAT is often the most commonly thought of threat to space assets. It typically involves a medium- or long-range missile launching from the Earth to damage or destroy a satellite in orbit. This form of attack is often easily attributed due to the missile launch which can be easily detected. Due to the physical nature of the attacks, they are irreversible and provide the attacker with near real-time confirmation of success. Direct-ascent ASATs create orbital debris which can be harmful to other objects in orbit. Lower altitudes allow for more debris to burn up in the atmosphere, while attacks at higher altitudes result in more debris remaining in orbit, potentially damaging other spacecraft in orbit.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101
EX-0017.02 Co-Orbital ASAT Co-orbital ASAT attacks are when another satellite in orbit is used to attack. The attacking satellite is first placed into orbit, then later maneuvered into an intercepting orbit. This form of attack requires a sophisticated on-board guidance system to successfully steer into the path of another satellite. A co-orbital attack can be a simple space mine with a small explosive that follows the orbital path of the targeted satellite and detonates when within range. Another co-orbital attack strategy is using a kinetic-kill vehicle (KKV), which is any object that can be collided into a target satellite.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101
EX-0018 Non-Kinetic Physical Attack A non-kinetic physical attack is when a satellite is physically damaged without any direct contact. Non-kinetic physical attacks can be characterized into a few types: electromagnetic pulses, high-powered lasers, and high-powered microwaves. These attacks have medium possible attribution levels and often provide little evidence of success to the attacker.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101
EX-0018.01 Electromagnetic Pulse (EMP) An EMP, such as those caused by high-altitude detonation of certain bombs, is an indiscriminate form of attack in space. For example, a nuclear detonation in space releases an electromagnetic pulse (EMP) that would have near immediate consequences for the satellites within range. The detonation also creates a high radiation environment that accelerates the degradation of satellite components in the affected orbits.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101
EX-0018.02 High-Powered Laser A high-powered laser can be used to permanently or temporarily damage critical satellite components (i.e. solar arrays or optical centers). If directed toward a satellite’s optical center, the attack is known as blinding or dazzling. Blinding, as the name suggests, causes permanent damage to the optics of a satellite. Dazzling causes temporary loss of sight for the satellite. While there is clear attribution of the location of the laser at the time of the attack, the lasers used in these attacks may be mobile, which can make attribution to a specific actor more difficult because the attacker does not have to be in their own nation, or even continent, to conduct such an attack. Only the satellite operator will know if the attack is successful, meaning the attacker has limited confirmation of success, as an attacked nation may not choose to announce that their satellite has been attacked or left vulnerable for strategic reasons. A high-powered laser attack can also leave the targeted satellite disabled and uncontrollable, which could lead to collateral damage if the satellite begins to drift. A higher-powered laser may permanently damage a satellite by overheating its parts. The parts most susceptible to this are satellite structures, thermal control panels, and solar panels.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101
EX-0018.03 High-Powered Microwave High-powered microwave (HPM) weapons can be used to disrupt or destroy a satellite’s electronics. A “front-door” HPM attack uses a satellite’s own antennas as an entry path, while a “back-door” attack attempts to enter through small seams or gaps around electrical connections and shielding. A front-door attack is more straightforward to carry out, provided the HPM is positioned within the field of view of the antenna that it is using as a pathway, but it can be thwarted if the satellite uses circuits designed to detect and block surges of energy entering through the antenna. In contrast, a back-door attack is more challenging, because it must exploit design or manufacturing flaws, but it can be conducted from many angles relative to the satellite. Both types of attacks can be either reversible or irreversible; however, the attacker may not be able to control the severity of the damage from the attack. Both front-door and back-door HPM attacks can be difficult to attribute to an attacker, and like a laser weapon, the attacker may not know if the attack has been successful. A HPM attack may leave the target satellite disabled and uncontrollable which can cause it to drift into other satellites, creating further collateral damage.* *https://aerospace.csis.org/aerospace101/counterspace-weapons-101
PER-0002 Backdoor Threat actors may find and target various backdoors, or inject their own, within the victim spacecraft in the hopes of maintaining their attack.
PER-0002.01 Hardware Threat actors may find and target various hardware backdoors within the victim spacecraft in the hopes of maintaining their attack. Once in orbit, mitigating the risk of various hardware backdoors becomes increasingly difficult for ground controllers. By targeting these specific vulnerabilities, threat actors are more likely to remain persistent on the victim spacecraft and perpetuate further attacks.
PER-0002.02 Software Threat actors may inject code to create their own backdoor to establish persistent access to the spacecraft. This may be done through modification of code throughout the software supply chain or through modification of the software-defined radio configuration (if applicable).
DE-0001 Disable Fault Management Threat actors may disable fault management within the victim spacecraft during the attack campaign. During the development process, many fault management mechanisms are added to the various parts of the spacecraft in order to protect it from a variety of bad/corrupted commands, invalid sensor data, and more. By disabling these mechanisms, threat actors may be able to have commands processed that would not normally be allowed.
DE-0002 Prevent Downlink Threat actors may target the downlink connections to prevent the victim spacecraft from sending telemetry to the ground controllers. Telemetry is the only method in which ground controllers can monitor the health and stability of the spacecraft while in orbit. By disabling this downlink, threat actors may be able to stop mitigations from taking place.
DE-0002.02 Jam Link Signal Threat actors may overwhelm/jam the downlink signal to prevent transmitted telemetry signals from reaching their destination without severe modification/interference, effectively leaving ground controllers unaware of vehicle activity during this time. Telemetry is the only method in which ground controllers can monitor the health and stability of the spacecraft while in orbit. By disabling this downlink, threat actors may be able to stop mitigations from taking place.
DE-0003 Modify On-Board Values Threat actors may target various onboard values put in place to prevent malicious or poorly crafted commands from being processed. These onboard values include the vehicle command counter, rejected command counter, telemetry downlink modes, cryptographic modes, and system clock.
DE-0003.10 GPS Ephemeris A satellite with a GPS receiver can use ephemeris data from GPS satellites to estimate its own position in space. A hostile actor could spoof the GPS signals to cause erroneous calculations of the satellite’s position. The received ephemeris data is often telemetered and can be monitored for indications of GPS spoofing. Reception of ephemeris data that changes suddenly without a reasonable explanation (such as a known GPS satellite handoff), could provide an indication of GPS spoofing and warrant further analysis. Threat actors could also change the course of the vehicle and falsify the telemetered data to temporarily convince ground operators the vehicle is still on a proper course.
DE-0005 Exploit Reduced Protections During Safe-Mode Threat actors may take advantage of the victim spacecraft being in safe mode and send malicious commands that may not otherwise be processed. Safe-mode is when all non-essential systems are shut down and only essential functions within the spacecraft are active. During this mode, several commands are available to be processed that are not normally processed. Further, many protections (i.e. security features) may be disabled at this time which would ensure the threat actor achieves evasion.
DE-0009 Camouflage, Concealment, and Decoys (CCD) This technique deals with the more physical aspects of CCD that may be utilized by threat actors. There are numerous ways a threat actor may utilize the physical operating environment to their advantage, including powering down and laying dormant within debris fields as well as launching EMI attacks during space-weather events.
DE-0009.01 Debris Field Threat actors may hide their spacecraft by laying dormant within clusters of space junk or similar debris fields. This could serve several purposes including concealment of inspection activities being performed by the craft, as well as facilitating some future kinetic intercept/attack, and more.
LM-0001 Hosted Payload Threat actors may use the hosted payload within the victim spacecraft in order to gain access to other subsystems. The hosted payload often has a need to gather and send data to the internal subsystems, depending on its purpose. Threat actors may be able to take advantage of this communication in order to laterally move to the other subsystems and have commands be processed.
LM-0002 Exploit Lack of Bus Segregation Threat actors may exploit victim spacecraft on-board flat architecture for lateral movement purposes. Depending on implementation decisions, spacecraft can have a completely flat architecture where remote terminals, sub-systems, payloads, etc. can all communicate on the same main bus without any segmentation, authentication, etc. Threat actors can leverage this poor design to send specially crafted data from one compromised devices or sub-system. This could enable the threat actor to laterally move to another area of the spacecraft or escalate privileges (i.e., bus master, bus controller)

Space Threats Mapped

ID Description
SV-AC-3 Compromised master keys or any encryption key
SV-CF-2 Eavesdropping (RF and proximity)
SV-IT-2 Unauthorized modification or corruption of data
SV-MA-2 Heaters and flow valves of the propulsion subsystem are controlled by electric signals so cyberattacks against these signals could cause propellant lines to freeze, lock valves, waste propellant or even put in de-orbit or unstable spinning
SV-AV-4 Attacking the scheduling table to affect tasking
SV-IT-5 Onboard control procedures (i.e., ATS/RTS) that execute a scripts/sets of commands
SV-MA-3 Attacks on critical software subsystems
Attitude Determination and Control (AD&C) subsystem determines and controls the orientation of the satellite. Any cyberattack that could disrupt some portion of the control loop - sensor data, computation of control commands, and receipt of the commands would impact operations
Telemetry, Tracking and Commanding (TT&C) subsystem provides interface between satellite and ground system. Computations occur within the RF portion of the TT&C subsystem, presenting cyberattack vector
Command and Data Handling (C&DH) subsystem is the brains of the satellite. It interfaces with other subsystems, the payload, and the ground. It receives, validate, decodes, and sends commands to other subsystems, and it receives, processes, formats, and routes data for both the ground and onboard computer. C&DH has the most cyber content and is likely the biggest target for cyberattack.
Electrical Power Subsystem (EPS) provides, stores, distributes, and controls power on the satellite. An attack on EPS could disrupt, damage, or destroy the satellite.
SV-SP-1 Exploitation of software vulnerabilities (bugs); Unsecure code, logic errors, etc. in the FSW.
SV-SP-3 Introduction of malicious software such as a virus, worm, Distributed Denial-Of-Service (DDOS) agent, keylogger, rootkit, or Trojan Horse
SV-SP-6 Software reuse, COTS dependence, and standardization of onboard systems using building block approach with addition of open-source technology leads to supply chain threat
SV-SP-9 On-orbit software updates/upgrades/patches/direct memory writes. If TT&C is compromised or MOC or even the developer's environment, the risk exists to do a variation of a supply chain attack where after it is in orbit you inject malicious code
SV-AC-5 Proximity operations (i.e., grappling satellite)
SV-AC-6 Three main parts of S/C. CPU, memory, I/O interfaces with parallel and/or serial ports. These are connected via busses (i.e., 1553) and need segregated. Supply chain attack on CPU (FPGA/ASICs), supply chain attack to get malware burned into memory through the development process, and rogue RTs on 1553 bus via hosted payloads are all threats. Security or fault management being disabled by non-mission critical or payload; fault injection or MiTM into the 1553 Bus - China has developed fault injector for 1553 - this could be a hosted payload attack if payload has access to main 1553 bus; One piece of FSW affecting another. Things are not containerized from the OS or FSW perspective;
SV-AC-8 Malicious Use of hardware commands - backdoors / critical commands
SV-AV-2 Satellites base many operations on timing especially since many operations are automated. Cyberattack to disrupt timing/timers could affect the vehicle (Time Jamming / Time Spoofing)
SV-AV-3 Affect the watchdog timer onboard the satellite which could force satellite into some sort of recovery mode/protocol
SV-IT-3 Compromise boot memory
SV-IT-4 Cause bit flip on memory via single event upsets
SV-MA-8 Payload (or other component) is told to constantly sense or emit or run whatever mission it had to the point that it drained the battery constantly / operated in a loop at maximum power until the battery is depleted.
SV-SP-11 Software defined radios - SDR is also another computer, networked to other parts of the spacecraft that could be pivoted to by an attacker and infected with malicious code. Once access to an SDR is gained, the attacker could alter what the SDR thinks is correct frequencies and settings to communicate with the ground.
SV-SP-7 Software can be broken down into three levels (operating system and drivers’ layer, data handling service layer, and the application layer). Highest impact on system is likely the embedded code at the BIOS, kernel/firmware level. Attacking the on-board operating systems. Since it manages all the programs and applications on the computer, it has a critical role in the overall security of the system. Since threats may occur deliberately or due to human error, malicious programs or persons, or existing system vulnerability mitigations must be deployed to protect the OS.
SV-AV-5 Using fault management system against you. Understanding the fault response could be leveraged to get satellite in vulnerable state. Example, safe mode with crypto bypass, orbit correction maneuvers, affecting integrity of TLM to cause action from ground, or some sort of RPO to cause S/C to go into safe mode;
SV-AV-6 Complete compromise or corruption of running state
SV-DCO-1 Not knowing that you were attacked, or attack was attempted
SV-MA-5 Not being able to recover from cyberattack
SV-AC-1 Attempting access to an access-controlled system resulting in unauthorized access
SV-AC-2 Replay of recorded authentic communications traffic at a later time with the hope that the authorized communications will provide data or some other system reaction
SV-CF-1 Tapping of communications links (wireline, RF, network) resulting in loss of confidentiality; Traffic analysis to determine which entities are communicating with each other without being able to read the communicated information
SV-CF-4 Adversary monitors for safe-mode indicators such that they know when satellite is in weakened state and then they launch attack
SV-IT-1 Communications system spoofing resulting in denial of service and loss of availability and data integrity
SV-AC-7 Weak communication protocols. Ones that don't have strong encryption within it
SV-AV-1 Communications system jamming resulting in denial of service and loss of availability and data integrity
SV-MA-7 Exploit ground system and use to maliciously to interact with the spacecraft
SV-AC-4 Masquerading as an authorized entity in order to gain access/Insider Threat
SV-AV-7 The TT&C is the lead contributor to satellite failure over the first 10 years on-orbit, around 20% of the time. The failures due to gyro are around 12% between year one and 6 on-orbit and then ramp up starting around year six and overtake the contributions of the TT&C subsystem to satellite failure. Need to ensure equipment is not counterfeit and the supply chain is sound.
SV-CF-3 Knowledge of target satellite's cyber-related design details would be crucial to inform potential attacker - so threat is leaking of design data which is often stored Unclass or on contractors’ network
SV-MA-1 Space debris colliding with the spacecraft
SV-MA-4 Not knowing what your crown jewels are and how to protect them now and in the future.
SV-MA-6 Not planning for security on SV or designing in security from the beginning
SV-SP-10 Compromise development environment source code (applicable to development environments not covered by threat SV-SP-1, SV-SP-3, and SV-SP-4).
SV-SP-2 Testing only focuses on functional requirements and rarely considers end to end or abuse cases
SV-SP-4 General supply chain interruption or manipulation
SV-SP-5 Hardware failure (i.e., tainted hardware) {ASIC and FPGA focused}

Sample Requirements

Requirement
The Program shall require the developer of the system, system component, or system services to demonstrate the use of a system development life cycle that includes [state-of-the-practice system/security engineering methods, software development methods, testing/evaluation/validation techniques, and quality control processes]. {SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-9} {SA-3,SA-4(3)}
The Program shall require subcontractors developing information system components or providing information system services (as appropriate) to demonstrate the use of a system development life cycle that includes [state-of-the-practice system/security engineering methods, software development methods, testing/evaluation/validation techniques, and quality control processes]. {SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-9} {SA-3,SA-4(3)}
The Program shall require the developer of the system, system component, or system service to deliver the system, component, or service with [Program-defined security configurations] implemented. {SV-SP-1,SV-SP-9} {SA-4(5)}
The Program shall require the developer of the system, system component, or system service to use [Program-defined security configurations] as the default for any subsequent system, component, or service reinstallation or upgrade. {SV-SP-1,SV-SP-3,SV-SP-9} {SA-4(5)}
The Program shall perform and document threat and vulnerability analyses of the as-built system, system components, or system services. {SV-SP-1,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11(2)}
The Program shall use the threat and vulnerability analyses of the as-built system, system components, or system services to inform and direct subsequent testing/evaluation of the as-built system, component, or service. {SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11(2)}
The Program shall perform a manual code review of all flight code. {SV-SP-1,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11(4)}
The Program shall conduct an Attack Surface Analysis and reduce attack surfaces to a level that presents a low level of compromise by an attacker. {SV-SP-1,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11(6),SA-15(5)}
The Program shall use threat modeling and vulnerability analysis to inform the current development process using analysis from similar systems, components, or services where applicable. {SV-SP-1,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11(2),SA-15(8)}
The Program shall create and implement a security assessment plan that includes: (1) The types of analyses, testing, evaluation, and reviews of [all] software and firmware components; (2) The degree of rigor to be applied to include abuse cases and/or penetration testing; and (3) The types of artifacts produced during those processes. {SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11,SA-11(5),CA-8}
The Program shall verify that the scope of security testing/evaluation provides complete coverage of required security controls (to include abuse cases and penetration testing) at the depth of testing defined in the test documents. {SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11(5),SA-11(7),CA-8}
The Program shall perform [Selection (one or more): unit; integration; system; regression] testing/evaluation at [Program-defined depth and coverage]. {SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11}
The Program shall maintain evidence of the execution of the security assessment plan and the results of the security testing/evaluation. {SV-SP-1,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11,CA-8}
The Program shall implement a verifiable flaw remediation process into the developmental and operational configuration management process. {SV-SP-1,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11}
The Program shall correct flaws identified during security testing/evaluation. {SV-SP-1,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11}
The Program shall test software and firmware updates related to flaw remediation for effectiveness and potential side effects on mission systems in a separate test environment before installation. {SV-SP-1,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SI-2,CM-3(2),CM-4(1)}
The Program shall release updated versions of the mission information systems incorporating security-relevant software and firmware updates, after suitable regression testing, at a frequency no greater than [Program-defined frequency [90 days]]. {SV-SP-1,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {CM-3(2),CM-4(1)}
The Program shall create prioritized list of software weakness classes (e.g., Common Weakness Enumerations) to be used during static code analysis for prioritization of static analysis results. {SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11(1),SA-15(7)}
The Program shall perform static source code analysis for [all available source code] looking for [Select one {Program-defined Top CWE List, SANS Top 25, OWASP Top 10}] weaknesses using no less than two static code analysis tools. {SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11(1),SA-15(7),RA-5}
The Program shall employ dynamic analysis (e.g., using simulation, penetration testing, fuzzing, etc.) to identify software/firmware weaknesses and vulnerabilities in developed and incorporated code (open source, commercial, or third-party developed code). {SV-SP-1,SV-SP-2,SV-SP-3,SV-SP-6,SV-SP-7,SV-SP-9,SV-SP-11} {SA-11(5),SA-11(8),CA-8}
The Program shall protect against supply chain threats to the system, system components, or system services by employing [institutional-defined security safeguards] {SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11} {SR-1}
The Program shall request threat analysis of suppliers of critical components and manage access to and control of threat analysis products containing U.S. person information. {SV-SP-3,SV-SP-4,SV-SP-11} {SR-1}
The Program shall perform penetration testing/analysis: (1) On potential system elements before accepting the system; (2) As a realistic simulation of the active adversary’s known adversary tactics, techniques, procedures (TTPs), and tools; and (3) Throughout the lifecycle on physical and logical systems, elements, and processes. {SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11} {SA-11(5)}
The Program shall employ [Program-defined] techniques to limit harm from potential adversaries identifying and targeting the Program supply chain. {SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11} {SR-3(2),SC-38}
The Program shall use all-source intelligence analysis of suppliers and potential suppliers of the information system, system components, or system services to inform engineering, acquisition, and risk management decisions. {SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11} {RA-3(2)}
The Program shall maintain a list of suppliers and potential suppliers used, and the products that they supply to include software. {SV-SP-3,SV-SP-4,SV-SP-11} {PL-8(2)}
The Program shall employ [Program-defined Operations Security (OPSEC) safeguards] to protect supply chain-related information for the system, system components, or system services. {SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11} {SR-7,SC-38,CP-2(8)}
The Program shall develop and implement anti-counterfeit policy and procedures designed to detect and prevent counterfeit components from entering the information system, including support tamper resistance and provide a level of protection against the introduction of malicious code or hardware. {SV-SP-3,SV-SP-4,SV-AV-7,SV-SP-11} {SR-11}
The Program shall develop and implement anti-counterfeit policy and procedures, in coordination with the [CIO], that is demonstrably consistent with the anti-counterfeit policy defined by the Program office. {SV-SP-4,SV-SP-11} {SR-11}
The Program shall perform static binary analysis of all firmware that is utilized on the spacecraft. {SV-SP-7,SV-SP-11} {SA-11,RA-5}
The Program shall conduct a criticality analysis to identify mission critical functions and critical components and reduce the vulnerability of such functions and components through secure system design. {SV-SP-3,SV-SP-4,SV-AV-7,SV-MA-4} {SR-1,RA-9,SA-15(3),CP-2(8)}
The spacecraft shall retain the capability to update/upgrade operating systems while on-orbit. {SV-SP-7} {SA-4(5)}
The spacecraft shall monitor and collect all onboard cyber-relevant data (from multiple system components), including identification of potential attacks and sufficient information about the attack for subsequent analysis. {SV-DCO-1} {SI-4,SI-4(2),AU-2}
The spacecraft shall be designed and configured so that [Program-defined encrypted communications traffic and data] is visible to on-board monitoring tools. {SV-DCO-1} {SI-4(10)}
The spacecraft shall integrate cyber related detection and responses with existing fault management capabilities to ensure tight integration between traditional fault management and cyber intrusion detection and prevention. {SV-DCO-1} {AU-6(4),SI-4(16)}
The spacecraft shall be able to locate the onboard origin of a cyberattack and alert ground operators within [TBD minutes]. {SV-DCO-1} {SI-4(16)}
The spacecraft shall attribute cyberattacks and identify unauthorized use of the spacecraft by downlinking onboard cyber information to the mission ground station within [mission-appropriate timelines minutes]. {SV-DCO-1} {AU-4(1),SI-4(5)}
The spacecraft shall detect and deny unauthorized outgoing communications posing a threat to the spacecraft. {SV-DCO-1} {SI-4(4),SC-7(9),SI-4(11)}
The spacecraft shall recover from cyber-safe mode to mission operations within [mission-appropriate timelines 5 minutes]. {SV-MA-5} {CP-2(5),IR-4}
The Program shall define acceptable secure communication protocols available for use within the mission in accordance with applicable federal laws, Executive Orders, directives, policies, regulations, and standards. {SV-AC-7} {SA-4(9)}
The spacecraft shall only use [Program-defined] communication protocols within the mission. {SV-AC-7} {SA-4(9)}
Not cyber threat but a generic requirement can be stated the The Program shall maintain 24/7 space situational awareness for potential collision with space debris that could come in contact with the spacecraft. {SV-MA-1} {PE-20}
The Program shall use all-source intelligence analysis on threats to mission critical capabilities and/or system components to inform risk management decisions. {SV-MA-4} {RA-3(2)}
The Program shall conduct an assessment of risk, including the likelihood and magnitude of harm, from the unauthorized access, use, disclosure, disruption, modification, or destruction of the spacecraft and the information it processes, stores, or transmits. {SV-MA-4} {RA-3}
The Program's risk assessment shall include the full end to end communication pathway from the ground to the spacecraft. {SV-MA-4} {RA-3}
The Program shall document risk assessment results in [risk assessment report]. {SV-MA-4} {RA-3}
The Program shall review risk assessment results [At least annually if not otherwise defined in formal organizational policy]. {SV-MA-4} {RA-3}
The Program shall update the risk assessment [At least annually if not otherwise defined in formal institutional policy] or whenever there are significant changes to the information system or environment of operation (including the identification of new threats and vulnerabilities), or other conditions that may impact the security state of the spacecraft. {SV-MA-4} {RA-3}
The Program shall document and design a security architecture using a defense-in-depth approach that allocates the Program defined safeguards to the indicated locations and layers: [Examples include operating system abstractions and hardware mechanisms to the separate processors in the spacecraft, internal components, and the FSW]. {SV-MA-6} {PL-8,PL-8(1)}
The Program shall ensure that the allocated security safeguards operate in a coordinated and mutually reinforcing manner. {SV-MA-6} {PL-8(1)}
The Program shall implement a security architecture and design that provides the required security functionality, allocates security controls among physical and logical components, and integrates individual security functions, mechanisms, and processes together to provide required security capabilities and a unified approach to protection. {SV-MA-6} {SA-2,SA-8}
The Program shall report counterfeit information system components to [Selection (one or more): source of counterfeit component; [Program-defined external reporting organizations]; [Program-defined personnel or roles]]. {SV-SP-4} {SR-11}
The Program shall report counterfeit information system components to the [CIO]. {SV-SP-4} {SR-11}
The Program shall ensure that the contractors/developers have all EEEE, and mechanical piece parts procured from the Original Component Manufacturer (OCM) or their authorized franchised distribution network. {SV-SP-5} {SR-1,SR-5}
Any EEEE or mechanical piece parts that cannot be procured from the OCM or their authorized franchised distribution network shall be approved by the program’s Parts, Materials and Processes Control Board (PMPCB) as well as the government program office to prevent and detect counterfeit and fraudulent parts and materials. {SV-SP-5} {SR-1,SR-5}
The Program shall ensure that the contractors/developers have all ASICs designed, developed, manufactured, packaged, and tested by suppliers with a Defense Microelectronics Activity (DMEA) Trust accreditation. {SV-SP-5} {SR-1,SR-5}
For ASICs that are designed, developed, manufactured, packaged, or tested by a supplier that is NOT DMEA accredited Trusted, the ASIC development shall undergo a threat/vulnerability risk assessment. The assessment shall use Aerospace security guidance and requirements tailored from TOR-2019-00506 Vol. 2, and TOR-2019-02543 ASIC and FPGA Risk Assessment Process and Checklist. Based on the results of the risk assessment, the Program may require the developer to implement protective measures or other processes to ensure the integrity of the ASIC. {SV-SP-5} {SR-1,SR-5}
The developer shall use a DMEA certified environment to develop, code and test executable software (firmware or bit-stream) that will be programmed into a one-time programmable FPGA or be programmed into non-volatile memory (NVRAM) that the FPGA executes. {SV-SP-5} {SR-1,SR-5}
For FPGA pre-silicon artifacts that are developed, coded, and tested by a developer that is NOT DMEA accredited Trusted, the contractor/developer shall be subjected to a development environment and pre-silicon artifacts risk assessment by the Program. The assessment shall use Aerospace security guidance and requirements in TOR-2019-00506 Vol. 2, and TOR-2019-02543 ASIC and FPGA Risk Assessment Process and Checklist. Based on the results of the risk assessment, the Program may require the developer to implement protective measures or other processes to ensure the integrity of the FPGA pre-silicon artifacts. {SV-SP-5} {SR-1,SR-5}
In the event we want to levy the Government Microelectronics Assessment for Trust (GOMAT) framework outright, to perform ASIC and FPGA threat/vulnerability risk assessment, the following requirements would apply: {SV-SP-5} {SR-1,SR-5} * The GOMAT framework shall be used to perform an initial risk assessment via Aerospace TOR-2019-02543 ASIC/FPGA Risk Assessment Process and Checklist. * The GOMAT framework shall be used to provide ASIC/FPGA lifecycle security guidance and requirements via Aerospace TOR-2019-00506 Volumes & 2 “ASIC and FPGA Lifecyle Security: Threats and Countermeasures”. * The GOMAT framework shall be used to perform development environment vulnerability assessment via Aerospace TOR-2019-02543 ASIC/FPGA Risk Assessment Process and Checklist. * The GOMAT framework shall be used to perform development environment vulnerability (DEV) assessment using the tailored DEV requirements from Aerospace TOR-2019-00506 Volume 2. * The GOMAT framework shall be used to perform hardware Trojan horse (HTH) detection independent verification and validation (IV&V). * The GOMAT framework shall be used to perform incremental and final risk assessments via Aerospace TOR-2019-02543 ASIC/FPGA Risk Assessment Process and Checklist. * The GOMAT framework shall be used to recommend mitigations, based on the findings of the risk assessments, to address identified security concerns and vulnerabilities.